Products

Racing Helmet Speakers - 1.5" The soft, 1.5" padded speakers attach to the inside of your helmet by Velcro pads (included). They have a long section of cable which connects via the jack. The speakers are also easily mounted in ear muffs for better clarity and sound. (ear muffs sold separately) The helmet speakers have a standard 3.5mm jack. Use with RACEceiver, LAPceiver or your in car radio communication system. These speakers will mount in ear muffs but usually used in helmets where at ear muff is not an option but a small pocket for the speaker exists. Dual Helmet Speaker System 3.5mm jack - mono Velcro Pads for Installation Ideal for helmets without the option for ear muffs

2" Premium Helmet Speakers $42.00

2" Premium Helmet Speakers The soft, 2" padded speakers attach to the inside of your helmet by Velcro pads (included). They have a long section of cable which connects via the jack. The speakers are also easily mounted in ear muffs for better clarity and sound. (ear muffs sold separately) The helmet speakers have a standard 3.5mm jack. Use with RACEceiver, LAPceiver or your in car radio communication system. Dual Helmet Speaker System Velcro Pads for Installation Upgraded Larger Speaker, 2" 3.5mm jack - mono Speakers only (ear muffs sold separately) Note: Not all helmets are designed to use ear muffs. The Zamp RZ-70E, RL-70E, RZ-65D, RZ64C, RZ-44, RZ-42 and RZ-40 series helmets come standard with the ear muffs accessory (speakers not included with helmets).

3" Air Plenum - Carbon Fiber $265.00

3" Air Plenum - 90 degree 100% Carbon Fiber These slimline air plenums are used to help duct air to the vital components of the Chillout Systems Quantum Pro Series and Quantum V3 Coolers. With a 3 inch duct opening, the 90º Slimline Carbon Air Ducting Plenum forces cooler air from outside of the vehicle into the system intake for maximum cooling efficiency. The 90º angle fits easily into limited space for installs in tight cockpits and the carbon fiber provides a seamless, finished look. Can be attached to face either direction. This product is designed to be used in conjunction with a 3 inch blower with a minimum 175 cfm rating. Weighs 4 oz. 10.5” x 5.25” x 4.5”

3" NACA Duct - Carbon Fiber $155.00

NACA Duct - 3" 100% Carbon Fiber These light weight carbon NACA ducts are perfect for venting driver cooling systems, helmet air kits and brake kits. Anytime fresh air needs to be brought into the cockpit or ducted to vital components, these 100% carbon fiber ducts are the perfect solution. Ultra light weight and wind tunnel tested. Our NACA ducts bring air into a vehicle with minimal increase in drag. The purpose of a NACA duct is to increase the flow rate of air through it while not disturbing the boundary layer. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner, but without the drag effects of a plain scoop. The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn’t separate and cause turbulence and drag.

3dB Gain Antenna $100.00

3dB Gain 3.5" Race Car Antenna - Low Profile Premium low profile 3dB gain antenna offering twice the power out in a more directional area. GMRS Antenna NMO Mount, Dual-Band (VHF 136-174MHz) (UHF 400-470MHz) low profile 3.5” Antenna with 9.8' coax cable. Features: Detachable NMO Connection Radio Antenna Easy Installation Connection to radio: BNC Connector (standard) 9.8' RG58 coax cable (3m) UHF 400-470MHz VHF 136-174HHZ 3.5" tall, 1.5" wide

3dB Gain Antenna - Magnetic $100.00

3dB Gain 3.5" Race Car Antenna - Low Profile Magnetic Premium low profile 3dB gain antenna offering twice the power out in a more directional area. Magnetic base GMRS Antenna NMO Mount, Dual-Band (VHF 136-174MHz) (UHF 400-470MHz) low profile 3.5” Antenna with 9.8' coax cable. Features: Detachable NMO Connection Radio Antenna Quick Magnetic Mount Installation Connection to radio: BNC Connector (standard) 9.8' RG58 coax cable (3m) UHF 400-470MHz VHF 136-174HHZ Antenna: 3.5" tall, 1.5" wide Base: .4" tall, 2.2" wide

4" Air Plenum - Carbon Fiber $275.00

4" Air Plenum - 90 degree 100% Carbon Fiber These air plenums are used to help duct air to the vital components of the Chillout Systems Quantum Pro Series and Quantum V3 Coolers. Allowing 55% more airflow than 3 Inch ducting, the 90º Slimline 100% Carbon Fiber Air Ducting Plenum forces cooler air from outside of the vehicle into the system intake for the ultimate cooling efficiency.The 90º angle fits easily into limited space for install in tight cockpits and the carbon fiber provides a seamless, finished look.Can be attached to face either direction.This plenum is designed to be used in conjunction with a 4 inch blower with a minimum 200 cfm rating.4 inch ducting allows for even more air to flow through the system, great for extremely hot cars that need ultimate ducting and airflow. Weighs 5 oz. 10.5” x 5.25” x 4.5"

4" Dual NACA Duct - Carbon Fiber $275.00

Dual 4" NACA Duct 100% Carbon Fiber Ultra light weight and wind tunnel tested, our 4 inch NACA duct provides over 55% more airflow than standard 3" NACA ducts. Used in conjunction with 4" Neoprene Air Duct Hose. NACA ducts bring air into a vehicle with minimal increase in drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing the boundary layer. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner (without the drag effects of a standard scoop). The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn’t separate and cause turbulence and drag.

4" NACA Duct - Carbon Fiber $175.00

NACA Duct - 4" 100% Carbon Fiber These light weight carbon NACA ducts are perfect for venting driver cooling systems, helmet air kits and brake kits. Anytime fresh air needs to be brought into the cockpit or ducted to vital components, these 100% carbon fiber ducts are the perfect solution. Ultra light weight and wind tunnel tested. Our NACA ducts bring air into a vehicle with minimal increase in drag. The purpose of a NACA duct is to increase the flow rate of air through it while not disturbing the boundary layer. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner, but without the drag effects of a plain scoop. The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn’t separate and cause turbulence and drag.

4" Spherical Ram Air Duct - Carbon Fiber $315.00

4" Spherical Ram Air Duct - 90 degree 100% Carbon Fiber Designed for racing, RAM AIR DUCTS are constructed from ultra light weight and incredibly resilient, pre-impregnated, dry carbon fiber. The sleek, stylistic design and fabrication is wind tunnel tested for optimal performance without bending or breaking. Perfect for areas of installation where traditional NACA ducts will not fit. FEATURES: Constructed from 1mm dry 3k 2x2 twill weave carbon fiber Compatible with 4-inch (100mm) tube ducting. Ultra light weight and durable.

5-Point Ratchet Seat Harness - SFI 16.1 $293.95 $308.95

SFI 16.1 Ratcheting Seat Harness - 5-point Zamp’s new SFI 16.1 certified 5-point Seat Harness featuring 3"/2" adjustable ratchet polyester belts with lightweight aluminum adjusters on shoulder belts, latch link system, and durable steel hardware. Ratcheting seat belts offer the ultimate in tightening. 2-3" Shoulder belts 3" lap belts - pull down Latch Link Ratcheting SFI 16.1 certified

6pt 2-3 inch CAM-LOCK Harness - FIA - Pull Down $275.95 $289.95

Zamp Racing 6 point 2"-3" shoulder, 2" lap - FIA Harnesses Zamp’s new FIA 8853-2016 certified 6-point Seat Harnesses featuring 3" to 2" adjustable (pull-down/pull-out) polyester belts, quick-release camlock, and durable steel hardware. European premium cam mechanism. FIA 8853-2016 approved deluxe hardware, 50" adjustable shoulder harness, 6 point belt in "Pull-Down" configurations. 2" - 3" belts for increased point of contact on head and neck restraint systems. Sewn on pull tabs on all adjusters for easy release. Click here for mounting instructions Pull down configuration Premium CAM-Lock Comfortable 2"- 3" shoulder webbing Comfortable 2" sides and sub strap webbing FIA 8853-2016 Certification Color: Black All adjusters are constructed of Ultra-Light aircraft quality material. The adjusters on these belts have improved components built in to provide a tight lock when tightened down which means no need to tighten your belts while driving anymore! They also increase the ease of loosening and tightening belts without having to worry about the components “sticking” while getting in or out of the car.

712-712 CAN Cable - 5pin male, 2m $57.00

AiM CAN Cable - 712-712 5pin male to 5pin male, 2 meter CAN Cable to provide power/data transfer to/from your SmartyCam3 Dual, SmartyCam3 SPORT and other AiM data logging hardware requiring 712 binder 5pin male - 712 binder 5pin male. 2m Length

712-712 CAN Cable - 5pin male, 4m $57.00

AiM CAN Cable - 712-712 5pin male to 5pin male, 4 meter CAN Cable to provide power/data transfer to/from your SmartyCam3 Dual, SmartyCam3 SPORT and other AiM data logging hardware requiring 712 binder 5pin male - 712 binder 5pin male. 4m Length

AiM 2 Port Data Hub $85.00

AiM Data Hub - 2 Port (Auto / Kart) The acquisition of all essential data you need to evaluate your car performance needs the connection of many peripherals to your datalogger. This implies the presence of a great number of cables. To solve this problem, AiM developed Data Hub, the new CAN connection multiplier that works as an interface between all AiM loggers and their peripheral equipment. Each Hub connects the logger with two peripherals: i.e. LCU lambda controller, GPS09 Module and one or more TC Hub (thermocouples multiplier). Data Hub takes all the information you need to your logger with only one cable, minimizing wires overall. Data Hub with 1.5m cable length 2 Port data hub with external power More Data Hub can be connected in sequence in order to increase the number of peripherals which can be connected. Data Hub is waterproof IP65.

AiM 4 Port Data Hub $85.00

AiM 4 Port Data Hub The acquisition of all essential data you need to evaluate your car performance needs the connection of many peripherals to your datalogger. This implies the presence of a great number of cables. To solve this problem, AiM developed Data Hub, the new CAN connection multiplier that works as an interface between all AiM loggers and their peripheral equipment. Each Hub connects the logger with four peripherals: i.e. LCU lambda controller, GPS08 Module and one or more TC Hub (thermocouples multiplier). Data Hub takes all the information you need to your logger with only one cable, minimizing wires overall. Data Hub with 1.5m cable length Auto or Kart use More Data Hub can be connected in sequence in order to increase the number of peripherals which can be connected. Data Hub is waterproof IP65.

AiM 712 Colored Port Plug $4.00

AiM 712 Port Plug These threaded 712 port protection screws are perfect for sealing up your the ports in AiM data products. Designed with a rubber seal to keep dust and moisture out of vital areas. This AiM 712 dust cap fits all 3, 4, 5, and 7 pin female ports found on AiM data products and components. 5 available colors: Black, Blue, Red, Gold and Green Fits any of the AiM product line of dashes, cameras and components with the 712 binder including but not limited to: MyChron4 MyChron5 MyChron5S MyChron5S 2T MyChron6 MyChron6 2T Solo GPS lap timer Solo DL GPS lap timer Solo2 GPS lap timer Solo2 DL GPS lap timer MyChron Expansion Box Channel Expansion Box Data Hubs TC Hubs SmartyCam HD Rev. 2.1 SmartyCam GP HD Rev.2.1 SmartyCam GP HD Rev.2.2 SmartyCam3 Corsa SmartyCam3 GP SmartyCam3 Dual EVO4 EVO4S

AiM ACC 2 CAN Converter $349.00

ACC2 - Analog Channel Converter Enhance your Data Logger Performance. ACC2 is the new compact and powerful Analog CAN Converter that manages up to four analog channels at 200 Hz each. Configurable using the powerful Race Studio 3 software. The ACC2 manages 4 analog inputs, thermocouples (TC), thernoresistances (TR), 0-5v and 0-12v at a maximum frequency of 200Hz each. Now compatible with the AiM Solo2 DL Kit includes: ACC2 Compact Analog CAN Converter 4 Channel harness, (50cm, 19") (choice of split harness) CAN Cable 5pin-5pin - 1m standard. (Optional lengths available) Note: Must be connected to 12v power (example: Solo2DL powered via OBDII or external 12v) Note: Custom length harness can be ordered. We stock the 50cm split harnesses. (50cm/19", 100cm/39", 200cm/78" or 400cm/157") CHANNEL CONFIGURATIONOnce the proper split harness has been chosen between the available range, you can configure the channels according to the kind of sensor you connect to the converters.ACC2 and ACC2 Open support up to four K type thermocouples to manage the temperatures.

AiM Bullet Camera Cable from $98.00

AiM Coax Bullet Camera Cable Coax cable used to connect AiM remote bullet camera to the main recording unit. Available in various lengths. Compatible with the following AiM Camera systems: SmartyCam3 GP SmartyCam3 Dual SmartyCamGP HD

AiM Channel Expansion $300.00

Channel Expansion This compact CAN device provides virtually endless data acquisition system expansion options. Channel Expansion hub adds up to four freely configurable analog (or two digital and two analog) channels without occupying or modifying any of the existing system channels. Channel Expansion permits the connection of four sensors: CH1: analog 0-5V: pressure sensors, potentiometers, thermo-resistors or digital: speed sensor CH2: analog 0-5V: pressure sensors, potentiometers, thermo-resistors or digital: speed sensor CH3: analog 0-5V: pressure sensors, potentiometers, thermo-resistors CH4: analog 0-5V: pressure sensors, potentiometers, thermo-resistors More Channel Expansions can be connected to create a network. AiM network can support up to 16 expansion modules like GPS Module, Channel Expansion, TC Hub etc.

AiM Homologated CIK EGT Weld Bung $8.50

AiM Homologated EGT-CIK T12 Sensor Weld Bung AiM devices can measure exhaust gas temperature (EGT) using a thermocouple sensor placed in the exhaust header pipe. This weld bung must be welded in for proper installation. Weld bung: T12 All AiM thermocouples are K type sensor connectors. EGT Sensor (M5 thread) for use with MyChron4 / MyChron5 kart data systems. Note: Weld bung only - No Sensor

Sold out

AiM Infrared Belt Temp System $399.00

AiM IBTS - Infrared CVT Belt Temp Gauge | Record's and Recalls Data Due to anything you can find on an off-road circuit, UTV Racing is such a demanding activity which does really stress every component of your vehicle. Without any doubt, the transmission belt is one of those and if it should reach critical temperatures of exercise without being kept under control, it could even break down and let you out of the race. This is a simple and reliable way for monitoring the temperature of the transmission belt of your UTV. Simply the best on the market. Not only will it show drive belt temperature in real-time but it also records the data every 10 seconds for later recall. Sessions must be longer than 2 minutes and shorter than 5 hours This is the reason why AiM designed the Infrared Belt Temperature System: a simple and reliable way for monitoring the temperature of the transmission drive belt of your Polaris RZR, Can-Am X3 and Arctic Cat Wildcat UTV in Real-Time.The kit is composed by a gauge and an infrared sensor. Reliable, easy to install, perfectly visible in every light condition, it has been designed for working in a hard environment. What the gauge shows The temperature value is constantly shown and recorded in the internal memory every ten seconds, in order to be evaluated after the test. The external supply voltage It is possible to set two different thresholds for the temperature: A Warning level and an Alarm level. The temperature value is shown in: White when its value is under the Warning level Yellow when is over the Warning level Red when is over the alarm level. In this case, a RED message appears and the red LED starts blinking This unit will monitor any type CVT belt drive systems commonly found on the Polaris RZR, Arctic Cat Wildact and Can-Am X3 UTV and many other SXS UTV's. What's in the box: AiM IBTS Gauge Infrared belt temp sensor Patch cable for sensor Power cable - 12v IBTS setup and user guide IBTS system for use on but not limited to: PolarisPolaris RZRPolaris RangerCan-Am - BRPCan Am Maverick X3Can Am Maverick SportCan Am Maverick TrailCan Am DefenderCan Am Commander Arctic CatArctic Cat WildcatArctic Cat HAVOCArctic Cat StampedeArctic Cat ProwlerKawasakiMule SX - All

AiM Inline H2O Temp Fitting $29.00

AiM Inline H2O Temp Fitting AiM inline water temp housing for use with 10mm water temp sensor for karting. Fits 5/8" - 3/4" hose. Kit includes: Aluminum adapter housing 2 hose clamps Brass washer for sensor

AiM IR Optic Lap Receiver $84.00

AiM IR Optic Lap Receiver Eye Used today primarily for indoor kart racing applications where GPS is not accessible, the MyChron Optic Lap Receiver is used with the MyChron Optic Lap Transmitter for fast, reliable lap time sampling right to your dash. This unit is the same receiver included with older MyChron Kart Dash Kits but can be used with newer MyChron5 and MyChron6 (with adapter cable). The 4-pin 712 (screw-in) connector works with all AiM / MyChron kart dashes from the MyChron3 through to the MyChron5, and now even the MyChron6. The short 1.4 meter cord is long enough for easy positioning anywhere on a kart. With the accuracy of GPS in the new MyChron5's and MyChron6 outdoors, this is typically used in for indoor applications where GPS is not received. A trackside beacon transmitter will be required.

AiM LCU1S Lambda Controller $499.00

LCU1S Lambda Controller (CAN) LCU1S Lambda controller range of products allow you to perfectly tune the carburetion, or fuel injection with use of programmable ECU, of your engine as well as keep it at its best, appreciably improving your engine performances. All LCU1S lambda controllers use a wide band Bosch LSU 4.9 probe either for its capacity of saving the original calibration for its all life and for its duration.LCU1S can detect punctual Lambda value from 0.65 to 1.6, offering you an extremely precise measurement, extremely useful for engine tuning.Through the analysis of the remaining oxygen, LCU-One points out possible oxygen excess/lack in the carburetion, providing an essential information for 4 strokes engines: configurability of Stoichiometric ratio allows LCU-One to be used on petrol powered engines as well as on diesel or on alternative fuel (bio fuel, ethanol) powered ones. In the box: LCU1S CAN controller O2 sensor (LSU 4.9) O2 sensor weld bung When adding the LCU1S to a data logger utilizing a SmartyCam camera system or other simple external system, you will want to add a 2 port or 4 port data hub.

AiM MX UTV Arctic Cat Wildcat Dash Logger

AiM MX UTV Arctic Cat Wildcat Dash Logger $699.00

AiM MX UTV Data Logging Dash/Gauges Absolute freedom with AiM MX UTV custom dash logger for the Arctic Cat Wildcat. MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Supported models:- Wildcat XX Speed, RPM, Coolant Temp, Transmission Belt Temp and GPS Lap times are just a few things that can be show and data logged. Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type, like the Arctic Cat, directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector. MX UTV acquires and shows the following important information: Data coming from your ECU Transmission belt temperature, by using the infrared sensor included in the kit Model: Arctic Cat WildcatChannels that will be data logged and or displayed: Speed RPM with configurable RGB shift lights Gear Engine Coolant Temp (ECT) Throttle Position (TPS) Brake Switch Transmission Belt Temperature via infrared temp sensor Transmission belt temperature, no more worries. The transmission belt temperature is one of the main concern for UTV drivers. Now you can monitor actual belt surface temperature in Real-Time.Thanks to the infrared temperature sensor, included in the kit, it is possible to constantly check the temperature, reading it directly on the display.Two RGB alarm LEDs will turn on when the temperature gets close to the critical level. Find always your track and your data as well Thanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours. GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module. - Expandable to run LCU-one CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning. - SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions. What's in the box: AiM MX UTV Dash Unit AiM mounting plate and hardware Arctic Cat ECU power harness Infrared belt temp sensor Patch cable for sensor MX UTV setup and user guide

AiM MX UTV Can-Am Maverick X3 Dash Logger

AiM MX UTV Can-Am Maverick X3 Dash Logger $699.00

AiM MX UTV Data Logging Dash/Gauges Absolute freedom with AiM MX UTV custom dash logger for the Can-Am Maverick X3 MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Speed, RPM, Coolant Temp, Transmission Belt Temp and GPS Lap times are just a few things that can be show and data logged. Supported models:- Maverick- Maverick Trail- Maverick Sport Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type, like the Can-Am X3 directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector. MX UTV acquires and shows the following important information: Data coming from your ECU Transmission belt temperature, by using the infrared sensor included in the kit Model: CAN-AM Maverick X3 and Turbo modelChannels that will be data logged and or displayed: Speed RPM with configurable RGB shift lights Gear Engine Coolant Temp (ECT) Throttle Position (TPS) Brake Switch Instant Fuel Flow Transmission Belt Temperature via infrared temp sensor Instant Fuel Consumed (Turbo model) Boost Pressure (Turbo model) Intake Air Temp (Turbo model) Transmission belt temperature, no more worries. The transmission belt temperature is one of the main concern for UTV drivers. Now you can monitor actual belt surface temperature in Real-Time.Thanks to the infrared temperature sensor, included in the kit, it is possible to constantly check the temperature, reading it directly on the display.Two RGB alarm LEDs will turn on when the temperature gets close to the critical level. Find always your track and your data as wellThanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours. GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module. - Expandable to run LCU-one CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning. SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions. What's in the box: AiM MX UTV Dash Unit AiM mouting plate and hardware ECU power harness Infrared belt temp sensor Patch cable for sensor MX UTV setup and user guide

AiM MX UTV Polaris RZR Dash Logger $699.00

AiM MX UTV Data Logging Dash/Gauges for Polaris RZR Absolute freedom with AiM MX UTV custom dash logger for the Polaris RZR. MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Supported models:- RZR - RS1- RZR - XP1000- RZR - XP Turbo- RZR - PRO Speed, RPM, Coolant Temp, Transmission Belt Temp and GPS Lap time are just a few things that can be show and data logged.Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector. MX UTV acquires and shows the following important information: Data coming from your ECU Transmission belt temperature, by using the infrared sensor included in the kit Model: Polaris RZRChannels that will be data logged and or displayed: Speed RPM with configurable RGB shift lights Engine Coolant Temp (ECT) Throttle Position (TPS) Brake Switch Fuel Rate Transmission Belt Temperature via infrared temp sensor Boost Pressure (turbo model only) Charge Air Intake temp (turbo model only) Transmission belt temperature, no more worries. The transmission belt temperature is one of the main concern for UTV drivers. Now you can monitor actual belt surface temperature in Real-Time.Thanks to the infrared temperature sensor, included in the kit, it is possible to constantly check the temperature, reading it directly on the display.Two RGB alarm LEDs will turn on when the temperature gets close to the critical level. Find always your track and your data as wellThanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours. GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module. - Expandable to run LCU-One CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning. - SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions. What's in the box: AiM MX UTV Dash Unit AiM mounting plate and hardware ECU power harness Infrared belt temp sensor Patch cable for sensor MX UTV setup and user guide

AiM MX UTV Yamaha YXZ Dash Logger from $699.00

AiM MX UTV Data Logging Dash/Gauges for Yamaha YXZ Absolute freedom with AiM MX UTV custom dash logger for the Yamaha YXZ. MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Supported models:- YXZ 1000R- YXZ 1000R SS- YXZ 1000R SS SE Speed, RPM, Coolant Temp, Oil Temp or Oil Pressure and GPS Lap times are just a few things that can be show and data logged.Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector. MX UTV acquires and shows the following important information: Data coming from your ECU Oil Temp or Oil Pressure, by using the supplied sensor included in the kit. (choose sensor type above when ordering) Model: Yamaha YXZ 2016, 2017Channels that will be data logged and or displayed: Speed RPM with configurable RGB shift lights Gear Engine Coolant Temp (ECT) Throttle Position (TPS) (some models) Brake Switch (some models) Engine Oil Temp or Engine Oil Pressure Engine Oil Temp or Engine Oil Pressure for Yamaha models On the Yamaha, the the transmission belt temperature sensor is replaced with either an engine oil temp sensor or oil pressure sensor (oil psi add: $75.00). Temperature or Pressure can be displayed directly on the display.Two RGB alarm LEDs will turn on when the temperature or pressure gets close to the critical level. Find always your track and your data as wellThanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours. GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module. - Expandable to run LCU-one CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning. - SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions. What's in the box: AiM MX UTV Dash Unit AiM mounting plate and hardware ECU power harness Engine oil temp or oil pressure sensor Patch cable for sensor MX UTV setup and user guide

AiM MXG 1.3 Dash Logger - 7" $3,249.00

AiM MXG 1.3 Dash - Data Logger The MXG 1.3 has the largest display of the AiM auto data acquisition systems at 7". An evolution of the MXG that was designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS09c Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 7" display makes it perfect for wide cockpits installation. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List WiFi ConnectivityConfigure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection. CAN OutputWith the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities. High contrast TFT displayA high contrast TFT display identifies MXG at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons. Flexible alarmsMXG features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors.Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Two digital outputsMXG 1.3 features two digital outputs. Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: GPS09 Module (included in the kit) Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Rev.2.1 Cameras and All SmartyCam 3 Versions Included in the box: AiM MXG 1.3 Dash Logger 37-pin primary harness with bulkhead adapter 1.3m GPS 09 USB download cable Optional:Secondary Harness: 2 digital inputs, 4 analog inputs, 2nd CAN input Technical Specifications: Display: 7” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 950 g Power consumption: 400 mA CAN connections: 3 Analog inputs: 8 fully configurable, max 1,000 Hz each Resolution: 800x480 pixels Contrast: 1000:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 Motorsport connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 4 Speed inputs, lap signal, coil RPM input Digital outputs: 2 (1 Amp max each) Second CAN: Yes (optional 22-pin harness needed) WiFi connection: Yes Internal memory: 4 GB Ambient light sensor: Yes Waterproof: IP65

AiM MXG 1.3 Strada $1,799.00

AiM MXG 1.2/1.3 Strada Wide size color TFT dash for road use, currently has the largest display of the AiM auto dash systems (7 inches). The "Strada" version is much the same as the MXG 1.3 dash logger but without the data logging capabilities. The "Stada Logger" option can be added at anytime to bring it to a full data logger. The MXG 1.2/1.3 comes in 2 versions, standard and street icon version. Both versions come with a standard 14pin harness for power and ECU connection. If no ECU is available, the optional 23pin harness will be required along with sensors and patch cables. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List High contrast TFT displayA high contrast TFT display identifies MXG at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons. Flexible alarms & custom street iconsMXG features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons. Digital outputsMXG 1.2/1.3 Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU.This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: GPS09 Module Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Rev.2.1 Cameras and All SmartyCam 3 Versions Included in the box: AiM MXG 1.2/1.3 Strada Dash 14-pin power/CAN harness USB download cable Optional: 23-pin harness (2 digital, 8 analog channels) Typical for non-ECU vehicles wanting external sensors like temps and pressures. GPS Module Technical Specifications: Display: 7” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 950 g Power consumption: 400 mA CAN connections: 2 Analog inputs: 8 fully configurable, max 500 Hz each Resolution: 800x480 pixels Contrast: 1000:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 AMP connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 1 Speed inputs, 1 coil RPM input Digital outputs: 1 (1 Amp max) Second CAN: Yes (optional 23-pin harness needed) Ambient light sensor: Yes Waterproof: IP65

AiM MXM Compact Dash Logger $1,449.00

AiM MXm Compact Dash Logger The AiM MXm is the smallest full function dash logger which provides all the info needed by racers: it samples and shows key info like speed, lap times, RPM, gears, it has a 9 axis inertial platform, multiple math channels and much more. Its strengths are the compactness, just 5.5" x 3.5", which makes MXm perfect to be fit into any kind of car, bike or SXS UTV, and its plug-and-play usage - complete but simple. Typically ships in 3-5 days With full LCD backlit, customizable color display with 5 LED shift lights and 2 configurable RGB LED warning lights, the MXm is the perfect device for both Pro and Amateur racers. A wide range of data sources MXm samples data coming from your ECU, the internal GPS, the inertial platform (accelerometer, gyro and magnetometer) along with: 4 fully configurable analog inputs 3 digital inputs (2 speed inputs + 1 coil RPM input) and predefined math channels. The MXm can also be connected to many different stock or racing specific ECU's via CAN or K/Line. Click here for a complete list of ECU's Integrated shift lights and alarms MXm features a 5 LED shift light array. Choose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required.MXm also features two fully configurable RGB alarm LEDs: you can choose the conditions which turn them on/off, their color, select a solid alarm - or flashing one - and the flashing frequency. Two power outputs MXm features two power outputs that can drain up to 15 A each. The two power outputs can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. The MXm can also be connected to a CAN data hub, LCU-One Lambda Controller and the SmartyCam series of cameras. Race Studio 3 Software Race Studio 3 is the true 'engine' of your MXm, as it will manage all your activities related to configuration. The AiM MXm offers secure downloadable data via Wi-Fi using the the Race Studio3 software.With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, math channels, display pages, digital outputs, alarms, shift lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras. MXm Specifications: Display resolution: 268 x 128 pixels Backlight: 7 configurable RGB colors Ambient light sensor: Yes Shift lights: 5 configurable RGB LEDs Alarm LEDs: 2 configurable RGB LEDs CAN connections: 2 ECU connections: CAN, RS232 or K-Line ECU compatibility: +1,000 industry leading ECUs GPS: Integrated External modules: Lambda Controller and SmartyCam HD Analog inputs: 4 fully configurable, max 1,000 Hz each Digital inputs: 2 speed inputs, coil RPM input Digital outputs: 2 high-side Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Wi-Fi connection: Yes Internal memory: 4 GB non-volatile Body: Glass fiber reinforced Nylon Pushbuttons: Metallic Connectors: 37 pins Motorsport connector + 4 pins power connector Dimensions: 137x88.4x31.9 mm Weight: 330 g Waterproof: IP65 In The Box: AiM MXm Compact Dash Logger 37 pins standard harness USB cable Race Studio 3 software

AiM MXP 1.3 Dash Logger - 6" $2,899.00

AiM MXP 1.3, 6" Color TFT Dash Logger MXP data logger offers 50% more display area than the 5'' MXS display, in a similar dimension. The dash logger has an integrated shift array, configurable multicolor alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, GPS Module, inertial platform, analog and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections. Typically ships in 3-5 days Click here for Stock ECU List | Click here for Racing ECU List The MXP is also available in the Strada version for street use without data logging capabilities. The MXP Dash Logger has a wide range of data sources. MXP samples data coming from your ECU, the GPS Module, the 9 axis inertial platform (accelerometer, gyro and magnetometer), 8 fully configurable analog inputs, 6 digital inputs, predefined math channels and second CAN. Performance and data acquired can also be incremented adding up to eight expansion modules. Freely configurable pages. You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managedpushing one or two pushbuttons. High Contrast TFT Display A high contrast TFT display identifies MXP at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Flexible alarms & custom street icons MXP features five configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons. Two digital outputs MXP features two digital outputs. The two digital outputs (out) are LOW SIDE type (switch to ground): they can be configured in order to be turned on/off depending on the value of the analog or digital inputs. They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Camera inputs, also for rear mirror camera Two analog camera inputs are available, to swap your display into a mirror camera, through pushbutton command or event management.

AiM MXS 1.3 Dash Logger - 5" $2,899.00

AiM MXS 1.3 Dash 5" TFT Display - Data Logger The MXS 1.3 dash data logger for motorsports. MXS 1.3 is an evolution of the MXS and is used and designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS09c Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 5" display has been specifically designed for small cockpits installation. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List WiFi ConnectivityConfigure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection.Note: Special order Item - Item usually ships within 3-4 days. Free 2 day shipping on this item CAN Output With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.High contrast TFT displayA high contrast TFT display identifies MXS at the first glance.An ambient light sensor keeps the backlight at optimum brightness levels.Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two push buttons. Flexible alarmsMXS features six configurable RGB alarm LEDs: you choose the conditions, you choose the colors.Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Two digital outputs MXS features two digital outputs.Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light array Choose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Camera Included in the box: AiM MXS 1.3 Dash Logger 37-pin primary harness with bulkhead adapter 1.3m GPS09 USB download cable Optional:Secondary Harness: 2 digital inputs, 4 analog inputs, 2nd CAN input Technical Specifications of the AiM MXS: Display: 5” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 530g Power consumption: 400 mA CAN connections: 3 Analog inputs: 6 fully configurable, max 1,000 Hz each Resolution: 800x480 pixels Contrast: 600:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 Motorsport connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 4 Speed inputs, lap signal, coil RPM input Digital outputs: 2 (1 Amp max each) Second CAN: Yes (optional 22-pin harness needed) WiFi connection: Yes Internal memory: 4 GB Ambient light sensor: Yes Waterproof: IP65

AiM MXS 1.3 Strada $1,499.00

AiM MXS 1.2/1.3 Strada The MXS 1.2/1.3 Strada, compact size color TFT dash for road use. The "Strada" version is much the same as the MXS 1.3 dash logger but without the data logging capabilities. The "Stada Logger" option can be added at anytime to bring it to a full data logger. The MXS 1.2/1.3 comes in 2 versions, standard and street icon version. Both versions come with a standard 14pin harness for power and ECU connection. If no ECU is available, the optional 23pin harness will be required along with sensors and patch cables. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List High contrast TFT displayA high contrast TFT display identifies MXS at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons. Flexible alarms & custom street iconsMXS Strada features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons. Digital outputsMXS 1.2/1.3 Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU.This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: GPS09 Module Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Rev.2.1 Cameras and All SmartyCam 3 Versions Included in the box: AiM MXS 1.2/1.3 Strada Dash 14-pin power/CAN harness USB download cable Optional: 23-pin harness (2 digital, 8 analog channels) Typical for non-ECU vehicles wanting external sensors like temps and pressures. GPS Module Technical Specifications: Display: 5” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 480 g Power consumption: 400 mA CAN connections: 2 Analog inputs: 8 fully configurable, max 500 Hz each Resolution: 800x480 pixels Contrast: 600:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 AMP connectors + 1 Binder connector Alarm LEDs: 6 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 1 Speed inputs, 1 coil RPM input Digital outputs: 1 (1 Amp max) Second CAN: Yes (optional 23-pin harness needed) Ambient light sensor: Yes Waterproof: IP65

AiM MXT 1.3 Dash Logger - 10" $3,599.00

AiM MXT 1.3 Dash - Data Logger (10" Display) The MXT 1.3 has the largest display of the AiM auto data acquisition systems (10 inches). An evolution of the MXG that was designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS09c Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 10" display makes it perfect for wide cockpits installation. Typically ships within 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List In the box: MXT 10" Dash Logger 37pin harness GPS module USB cable WiFi ConnectivityConfigure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection. CAN OutputWith the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities. High contrast TFT displayA high contrast TFT display identifies MXT at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons. Flexible alarmsMXT features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors.Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Two digital outputsMXT 1.3 features two digital outputs. Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: GPS09 Module (included in the kit) Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Rev.2.1 Cameras and All SmartyCam3 Versions Included in the box: AiM MXT 1.3 Dash Logger 37-pin primary harness with bulkhead adapter 1.3m GPS 09 USB download cable Optional:Secondary Harness: 2 digital inputs, 4 analog inputs, 2nd CAN input Technical Specifications: (some specs will change with the MXT, shown are mostly MXG Specs) Display: 10” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: TBD Power consumption: 400 mA CAN connections: 3 Analog inputs: 8 fully configurable, max 500 Hz each Resolution: 800x480 pixels Contrast: TBD Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 Motorsport connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 4 Speed inputs, lap signal, coil RPM input Digital outputs: 2 (1 Amp max each) Second CAN: Yes (optional 22-pin harness needed) WiFi connection: Yes Internal memory: 4 GB Ambient light sensor: Yes Waterproof: IP65

AiM MyChron 10mm CHT Sensor - .4m $85.00

AiM MyChron 10mm CHT Sensor - .4m length AiM MyChron4 / MyChron5 10mm CHT (cylinder head temp) sensor, 10mm thermocouple sensor to k-style connector. The 14mm is the most common size in karting. (2-Stroke, Clone and Briggs and Stratton LO206) * Most common are the 14mm, thread diameter of the spark plug. (most 4 stroke and 2 stroke engines)* Briggs World Formula and Jawa engines use the 10mm. (peanut plug) Note: Must use MyChron TC Patch cable (yellow) For Kart Data Systems with single temp input (712 3pin).

AiM MyChron 10mm CHT Sensor - 1.5m $85.00

AiM MyChron 10mm CHT Sensor - 1.4m Length CHT Sensor for AiM MyChron4, MyChron5 and MyChron6 (single temp units) CHT (cylinder head temp) sensor. 10mm, Thermocouple, 712 - K-Style connector. 1.4m length. * Most common are the 14mm, thread diameter of the spark plug. (most 4 stroke and 2 stroke engines)* Briggs World Formula and Jawa engines use the 10mm. (peanut plug) For AiM MyChron Kart Data Systems with single temp input (3pin).

AiM MyChron 14mm CHT Sensor - .4m $85.00

AiM MyChron 14mm CHT Sensor - .4m length AiM MyChron4 / MyChron5 CHT (cylinder head temp) sensor, thermocouple sensor to k-style connector. The 14mm is the most common size in karting. (2-Stroke, Clone and Briggs and Stratton LO206) * Most common are the 14mm, thread diameter of the spark plug. (most 4 stroke and 2 stroke engines)* Briggs World Formula and Jawa engines use the 10mm. (peanut plug) Note: Must use MyChron TC Patch cable (yellow) For Kart Data Systems with single temp input (712 3pin).

AiM MyChron 14mm CHT Sensor - 1.5m $85.00

AiM MyChron 14mm CHT Sensor - 1.4m Length AiM MyChron4 / MyChron5 (single temp units) CHT (cylinder head temp) sensor. 14mm, Thermocouple, 712 - K-Style connector. 1.4m length. * Most common are the 14mm, thread diameter of the spark plug. (most 4 stroke and 2 stroke engines)* Briggs World Formula and Jawa engines use the 10mm. (peanut plug) For AiM MyChron Kart Data Systems with single temp input (3pin).

AiM MyChron 2T TC/TC Cable $65.00

AiM MyChron 2 Temp TC-TC Patch Cable - (Yellow/Yellow) AiM MyChron patch cable. 1.5m length, 712 3-pin/m to Yellow K-Style (TC), Yellow K-Style (TC) (Thermocouple / Thermocouple) used typically to connect the MyChron4, MyChron5 and MyChron6 to a temp sensors such as EGT and CHT (Thermocouple / Thermocouple). For Kart Data Systems including the MyChron5S 2T, MyChron5S 2T and MyChron6 2T with a 2 temp input (5pin).

AiM MyChron 2T TR/TC Cable $65.00

AiM MyChron 2 Temp TR-TC Patch Cable - (Black/Yellow) AiM MyChron patch cable. 1.5m length, 712 3-pin/m to 719 4-pin/f - black (TR) and Yellow K-Style (TC) used typically to connect the MyChron4, MyChron5 and MyChron6 to a temp sensor such as water and EGT or CHT. For Kart Data Systems including the MyChron5S, MyChron5 2T, MyChron5S 2T and MyChron6 2T with a 2 temp input (5pin).

AiM MyChron EGT Sensor $85.00

AiM MyChron EGT Sensor AiM devices can measure exhaust gas temperature (EGT) using a thermocouple sensor placed in the exhaust header pipe. All AiM thermocouples are K type sensor connectors. EGT Sensor (M5 thread) for use with MyChron4 / MyChron5 kart data systems. *Requires M5 Weld Bung

AiM MyChron EGT Sensor - CIK $85.00

AiM MyChron EGT Sensor / CIK-FIA T-12 Temperature Thermocouple. AiM devices can measure exhaust gas temperature (EGT) using a thermocouple sensor placed in the exhaust header pipe. All AiM thermocouples are K type sensor connectors. EGT Sensor for use with MyChron4 / MyChron5 kart data systems. CIK-FIA homologated

AiM MyChron EGT Weld Bung $7.00

AiM MyChron EGT Sensor Weld Bung AiM devices can measure exhaust gas temperature (EGT) using a thermocouple sensor placed in the exhaust header pipe. This weld bung must be welded in for proper installation. Weld bung: metric M5 x .8 All AiM thermocouples are K type sensor connectors. EGT Sensor (M5 thread) for use with MyChron4 / MyChron5 kart data systems. Note: Weld bung only - No Sensor

AiM MyChron Expansion - Kart $300.00

AiM MyChron Expansion Channel Multiplier MyChron Expansion channel multiplier improves MyChron5 and MyChron5 2T (and also MyChron4 and MyChron4 2T) performance, thanks to four additional channels and a further CAN bus connector. (Special order Item, ships within 3-4 days with free 2 day shipping) Through this last connector the systems can be connected to LCU-One Lambda controller and SmartyCam HD (and to GPS and Data key for MyChron4 systems). Thanks to its specific wirings, MyChron Expansion powers the systems and their peripherals with an external battery, avoiding internal battery consumption. MyChron Expansion features four inputs to connect the systems to an equal number of additional channels. All channels are easily configurable as analog through the system menu to sample data coming from: Exhaust gas valve position sensor (very important to understand at which RPM value the exhaust port opens) Wheel speed sensor: the first input on the left can be configured also as digital input No contact brake pedal position sensor No contact throttle pedal position sensor (to know if and when to accelerate) Brake pressure sensor Water temperature or cylinder head temperature (PT100 thermo-resistor only) Steering angle potentiometer (to highlight over/under steering situations) Brake pedal potentiometer Throttle pedal potentiometer MyChron Expansion is a complete, value-for-money instrument for professional kart analysis. Warning: MyChron Expansion DOES NOT support gear calculation.

AiM MyChron H2o TC Temp Sensor $85.00

AiM MyChron H2o Temp Sensor - Thermocouple Water temperature sensor TC (Thermocouple) (10mm) for use with MyChron kart data systems. M10 thread pitch sensor to K-Style connector. (Yellow) Can be used for water or oil temperature. *Karting Systems Note: For Single temp MyChron4, MyChron5's or MyChron6 users without a patch cable, a TC (yellow) patch cable will be needed.

AiM MyChron H2o Temp Sensor $85.00

AiM MyChron H2o Temp Sensor Water or Oil temperature sensor TR (thermoresistor) M10 thread (10mm) for use with MyChron kart data systems. Can be used for water or oil temperature. *Note: TR patch cable (black) required or use from existing system.

AiM MyChron RPM Sensor $15.00

AiM MyChron RPM Sensor - Wire/Clip AiM RPM sensor wire and clip to be used with the MyChron4, MyChron5 and MyChron6 kart data systems to pick up RPM. Compatible with 2 stoke and 4 stoke engines. Also known as a tach wire or tach lead.

AiM MyChron TC Patch Cable $50.00

AiM MyChron TC Patch Cable - Yellow AiM MyChron thermocouple patch cable. 1.5m length, 712 3-pin/m to K-style/f - yellow. Used for thermocouple (TC) sensors such as EGT and CHT. For Kart Data Systems with single temp input (3pin).

Find anything you need

Sign in to your account

Create an account

Item added to cart!