AiM GPS09 Module - Powerful GPS The GPS09 module is standard on most AiM data loggers including the MXS, MXG and MXP platforms. The GPS09 module is an option on all new SmartyCam3 (except sport) cameras when using in the stand alone mode. GPS technology represented a true revolution in racing data acquisition. Now another revolution has begun, thanks to GPS09 Module and Race Studio 3 software. As you start a track session you start sampling lap and split times as well as speed, position and acceleration... all the information you need for engine tuning as well as for improving your driving technique. GPS: 25hz External power: 5-15v Connection: AiM CAN Dimensions: 53.2mm x 53.8mm x 19.7mm Weight: 60.5 grams Waterproof: IP67 Cable length: .5m or 1.3m Up to four satellite systems: the greatest reliability and precision ever GPS09 is more precise: while GPS08 included GPS satellite signal and Global Navigation Satellite System (Glonass) signal, with GPS09 AiM added signals from BeiDou and Galileo satellite systems.GPS09 guarantees precision and reliability simply not comparable with the old generation of AiM GPS Modules. With your track included in AiM database,GPS09 does it all by itself As soon as GPS09 switches-on its position is detected and - if your track is included in Race Studio 3 database - starts sampling lap times. In fact, the software stores the start/finish line coordinates (plus map, contact info and logo) of more than four thousand tracks, sorted by nation, circuit and surface type. You can create your own collections, add/remove tracks as you wish. Just load your collection to AiM systems and GPS09 will be ready to operate. Should your home track be missing, you can easily add it to your track list.

Temperature and Pressure Sensor Combo temp sensor and pressure sensor all in one. 1/8" NPT, (2) 719 4-pin connector ideal for oil temp and oil pressure. 

IBTS Replacement IR Sensor Replacement IR CVT belt temp sensor for the AiM MX-UTV and IBTS belt temp gauge systems. 10:1 FOV Up to 250 degree Celsius

Boost / Vacuum (Absolute Pressure) Sensor 50 psi 1/8 NPT This "absolute pressure" MAP (manifold absolute pressure) sensor is used for measuring vapor (gas) pressures, from intake boost to crankcase pressure. The 50 psi pressure range is based on perfect vacuum (i.e., from 15 psi below atmospheric pressure to 35 psi above). This sensor is marked "0-50psiA" to differentiate it from the standard 0-50 psi sensor (marked "0-50psiSG"), which does not measure vacuum. 1/8" NPT 719 female connector 19" in length Used with most all current and past AiM data loggers including: All MX-series (MXm, MXS, MXP, MXG, MXT) EVO4, EVO4S, EVO5 MXL series MyChon Expansion Solo 2 DL when paired with ACC or ACC2

KA Pressure Sensor 0-50psi KA style Oil pressure sensor, 0-50psi, 1/8" NPT. 719 connector.

KA Pressure Sensor 0-2000psi Pressure sensor ideal for reading brake pressure, 0-2000psi. This sensor has a 4-pin 719 (plastic push-on) connector and a male 1/8 NPT thread.

KA Pressure Sensor 0-150psi KA style Oil pressure sensor, 0-150psi, 1/8" NPT. 719 connector.

AiM Accelerator (TPS) / Brake Pedal Position Sensor The accelerator/brake pedal position sensors represent a key support for kart drivers. They provide a precise indication of timing and intensity of braking / acceleration. Utilizing this data helps to understand if the driver has accelerated or braked at the right moment and with the correct strength. A very important fact to evaluate driver behavior and improve their performance.Data can be received by a MyChron5S or MyChron6 connected to MyChron Expansion and analyzed on your PC. Made in anodized aluminum, these sensors are very robust. They are water-resistant, too. Even calibration is immediate. Once installed, connect the sensors to MyChron Expansion and get pedal positions (in high position and zero position): after that the sensor will start getting acceleration/braking data. In the box: TPS Sensor Sensor magnet Mounting bracket & hardware 1.5m patch cable

AiM MyChron 10mm CHT Sensor - 1.4m Length CHT Sensor for AiM MyChron4, MyChron5 and MyChron6 (single temp units) CHT (cylinder head temp) sensor. 10mm, Thermocouple, 712 - K-Style connector. 1.4m length. * Most common are the 14mm, thread diameter of the spark plug. (most 4 stroke and 2 stroke engines)* Briggs World Formula and Jawa engines use the 10mm. (peanut plug) For AiM MyChron Kart Data Systems with single temp input (3pin).

AiM MyChron 10mm CHT Sensor - .4m length AiM MyChron4 / MyChron5 10mm CHT (cylinder head temp) sensor, 10mm thermocouple sensor to k-style connector. The 14mm is the most common size in karting. (2-Stroke, Clone and Briggs and Stratton LO206) * Most common are the 14mm, thread diameter of the spark plug. (most 4 stroke and 2 stroke engines)* Briggs World Formula and Jawa engines use the 10mm. (peanut plug) Note: Must use MyChron TC Patch cable (yellow) For Kart Data Systems with single temp input (712 3pin).

AiM MyChron EGT Sensor / CIK-FIA T-12 Temperature Thermocouple. AiM devices can measure exhaust gas temperature (EGT) using a thermocouple sensor placed in the exhaust header pipe. All AiM thermocouples are K type sensor connectors. EGT Sensor for use with MyChron4 / MyChron5 kart data systems. CIK-FIA homologated

AiM MyChron H2o Temp Sensor - Thermocouple Water temperature sensor TC (Thermocouple) (10mm) for use with MyChron kart data systems. M10 thread pitch sensor to K-Style connector. (Yellow) Can be used for water or oil temperature. *Karting Systems Note: For Single temp MyChron4, MyChron5's or MyChron6 users without a patch cable, a TC (yellow) patch cable will be needed.

AiM MyChron 14mm CHT Sensor - .4m length AiM MyChron4 / MyChron5 CHT (cylinder head temp) sensor, thermocouple sensor to k-style connector. The 14mm is the most common size in karting. (2-Stroke, Clone and Briggs and Stratton LO206) * Most common are the 14mm, thread diameter of the spark plug. (most 4 stroke and 2 stroke engines)* Briggs World Formula and Jawa engines use the 10mm. (peanut plug) Note: Must use MyChron TC Patch cable (yellow) For Kart Data Systems with single temp input (712 3pin).

AiM MyChron 14mm CHT Sensor - 1.4m Length AiM MyChron4 / MyChron5 (single temp units) CHT (cylinder head temp) sensor. 14mm, Thermocouple, 712 - K-Style connector. 1.4m length. * Most common are the 14mm, thread diameter of the spark plug. (most 4 stroke and 2 stroke engines)* Briggs World Formula and Jawa engines use the 10mm. (peanut plug) For AiM MyChron Kart Data Systems with single temp input (3pin).

AiM MyChron H2o Temp Sensor Water or Oil temperature sensor TR (thermoresistor) M10 thread (10mm) for use with MyChron kart data systems. Can be used for water or oil temperature. *Note: TR patch cable (black) required or use from existing system.  

AiM MyChron EGT Sensor AiM devices can measure exhaust gas temperature (EGT) using a thermocouple sensor placed in the exhaust header pipe. All AiM thermocouples are K type sensor connectors. EGT Sensor (M5 thread) for use with MyChron4 / MyChron5 kart data systems. *Requires M5 Weld Bung

Oil / Water Temperature Sensor (Auto) Thermoresistor temp sensor, 1/8" NPT 719 4-pin connector ideal for water and oil temp.

AiM IR Optic Lap Receiver Eye Used today primarily for indoor kart racing applications where GPS is not accessible, the MyChron Optic Lap Receiver is used with the MyChron Optic Lap Transmitter for fast, reliable lap time sampling right to your dash. This unit is the same receiver included with older MyChron Kart Dash Kits but can be used with newer MyChron5 and MyChron6 (with adapter cable). The 4-pin 712 (screw-in) connector works with all AiM / MyChron kart dashes from the MyChron3 through to the MyChron5, and now even the MyChron6. The short 1.4 meter cord is long enough for easy positioning anywhere on a kart. With the accuracy of GPS in the new MyChron5's and MyChron6 outdoors, this is typically used in for indoor applications where GPS is not received. A trackside beacon transmitter will be required.

MyChron5 Replacement Battery Replacement 2900mAh battery for all MyChron5 kart data systems. These rechargeable replacement batteries fit the MyChron5, MyChron5S, MyChron5-2T and MyChron5S-2T kart data loggers.

MyChron5 Battery Charger Proprietary charger for the AiM MyChron5 family of kart data loggers. We provide the USB charging cable with this charger.

AiM 110v Wall Charger AiM MyChron5, MyChron6, SmartyCam3 and Solo2 110v wall charger. Will charge MyChron battery while the battery is still installed on the MyChron. 110v USA wall charger to 5-pin connector. Also compatible with other AiM products using the 5-pin port for charging.

AiM Inline H2O Temp Fitting AiM inline water temp housing for use with 10mm water temp sensor for karting. Fits 5/8" - 3/4" hose. Kit includes: Aluminum adapter housing 2 hose clamps Brass washer for sensor

MyChron6 - Memory Module The USB-C connector on your MyChron6 allows you to charge your data logger and permits you to store all your data in the optional massive 16 GB dedicated memory module. The MyChron6 memory module allows for easy quick removal and with use of the supplied USB adapter, quick connection to your PC. Included: USB-C 16GB memory module USB - USB-C adapter

AiM MyChron RPM Sensor - Wire/Clip AiM RPM sensor wire and clip to be used with the MyChron4, MyChron5 and MyChron6 kart data systems to pick up RPM. Compatible with 2 stoke and 4 stoke engines. Also known as a tach wire or tach lead.

Weld Bung - M18x1.5 If you are considering adding an LCU-One Lambda controller (A/F ratio) to your data logging systems, pre-installing the M18 x 1.5 weld bung can save you time. Includes: M18 x 1.5 weld in bung M18 x 1.5 plug LCU-One and O2 sensor not included  

AiM Homologated EGT-CIK T12 Sensor Weld Bung AiM devices can measure exhaust gas temperature (EGT) using a thermocouple sensor placed in the exhaust header pipe. This weld bung must be welded in for proper installation. Weld bung: T12 All AiM thermocouples are K type sensor connectors. EGT Sensor (M5 thread) for use with MyChron4 / MyChron5 kart data systems. Note: Weld bung only - No Sensor

AiM MyChron EGT Sensor Weld Bung AiM devices can measure exhaust gas temperature (EGT) using a thermocouple sensor placed in the exhaust header pipe. This weld bung must be welded in for proper installation. Weld bung: metric M5 x .8 All AiM thermocouples are K type sensor connectors. EGT Sensor (M5 thread) for use with MyChron4 / MyChron5 kart data systems. Note: Weld bung only - No Sensor