Solo2 External Direct Power Cable The external direct power cable allows for the unit to run directly off a 12v power source wired direct.  Compatible with the AiM Solo2, MyChron5 and MyChron6.

MyChron External Power Cable The MyChron5 and MyChron6 external power cable allows for the unit to run directly off a 12v power source with the battery removed or installed. Compatible with all MyChron5 and MyChron6 kart data loggers.

AiM GPS09 Module - Powerful GPS The GPS09 module is standard on most AiM data loggers including the MXS, MXG and MXP platforms. The GPS09 module is an option on all new SmartyCam3 (except sport) cameras when using in the stand alone mode. GPS technology represented a true revolution in racing data acquisition. Now another revolution has begun, thanks to GPS09 Module and Race Studio 3 software. As you start a track session you start sampling lap and split times as well as speed, position and acceleration... all the information you need for engine tuning as well as for improving your driving technique. GPS: 25hz External power: 5-15v Connection: AiM CAN Dimensions: 53.2mm x 53.8mm x 19.7mm Weight: 60.5 grams Waterproof: IP67 Cable length: .5m or 1.3m Up to four satellite systems: the greatest reliability and precision ever GPS09 is more precise: while GPS08 included GPS satellite signal and Global Navigation Satellite System (Glonass) signal, with GPS09 AiM added signals from BeiDou and Galileo satellite systems.GPS09 guarantees precision and reliability simply not comparable with the old generation of AiM GPS Modules. With your track included in AiM database,GPS09 does it all by itself As soon as GPS09 switches-on its position is detected and - if your track is included in Race Studio 3 database - starts sampling lap times. In fact, the software stores the start/finish line coordinates (plus map, contact info and logo) of more than four thousand tracks, sorted by nation, circuit and surface type. You can create your own collections, add/remove tracks as you wish. Just load your collection to AiM systems and GPS09 will be ready to operate. Should your home track be missing, you can easily add it to your track list.

Weld Bung - M18x1.5 If you are considering adding an LCU-One Lambda controller (A/F ratio) to your data logging systems, pre-installing the M18 x 1.5 weld bung can save you time. Includes: M18 x 1.5 weld in bung M18 x 1.5 plug LCU-One and O2 sensor not included  

LCU1S Lambda Controller (CAN) LCU1S Lambda controller range of products allow you to perfectly tune the carburetion, or fuel injection with use of programmable ECU, of your engine as well as keep it at its best, appreciably improving your engine performances. All LCU1S lambda controllers use a wide band Bosch LSU 4.9 probe either for its capacity of saving the original calibration for its all life and for its duration.LCU1S can detect punctual Lambda value from 0.65 to 1.6, offering you an extremely precise measurement, extremely useful for engine tuning.Through the analysis of the remaining oxygen, LCU-One points out possible oxygen excess/lack in the carburetion, providing an essential information for 4 strokes engines: configurability of Stoichiometric ratio allows LCU-One to be used on petrol powered engines as well as on diesel or on alternative fuel (bio fuel, ethanol) powered ones. In the box: LCU1S CAN controller O2 sensor (LSU 4.9) O2 sensor weld bung When adding the LCU1S to a data logger utilizing a SmartyCam camera system or other simple external system, you will want to add a 2 port or 4 port data hub.

ACC2 - Analog Channel Converter Enhance your Data Logger Performance. ACC2 is the new compact and powerful Analog CAN Converter that manages up to four analog channels at 200 Hz each. Configurable using the powerful Race Studio 3 software. The ACC2 manages 4 analog inputs, thermocouples (TC), thernoresistances (TR), 0-5v and 0-12v at a maximum frequency of 200Hz each. Now compatible with the AiM Solo2 DL Kit includes: ACC2 Compact Analog CAN Converter 4 Channel harness, (50cm, 19") (choice of split harness) CAN Cable 5pin-5pin - 1m standard. (Optional lengths available) Note: Must be connected to 12v power (example: Solo2DL powered via OBDII or external 12v) Note: Custom length harness can be ordered. We stock the 50cm split harnesses. (50cm/19", 100cm/39", 200cm/78" or 400cm/157") CHANNEL CONFIGURATIONOnce the proper split harness has been chosen between the available range, you can configure the channels according to the kind of sensor you connect to the converters.ACC2 and ACC2 Open support up to four K type thermocouples to manage the temperatures.

AiM Data Hub - 2 Port (Auto / Kart) The acquisition of all essential data you need to evaluate your car performance needs the connection of many peripherals to your datalogger. This implies the presence of a great number of cables. To solve this problem, AiM developed Data Hub, the new CAN connection multiplier that works as an interface between all AiM loggers and their peripheral equipment. Each Hub connects the logger with two peripherals: i.e. LCU lambda controller, GPS09 Module and one or more TC Hub (thermocouples multiplier). Data Hub takes all the information you need to your logger with only one cable, minimizing wires overall. Data Hub with 1.5m cable length 2 Port data hub with external power More Data Hub can be connected in sequence in order to increase the number of peripherals which can be connected. Data Hub is waterproof IP65.

Channel Expansion This compact CAN device provides virtually endless data acquisition system expansion options. Channel Expansion hub adds up to four freely configurable analog (or two digital and two analog) channels without occupying or modifying any of the existing system channels. Channel Expansion permits the connection of four sensors: CH1: analog 0-5V: pressure sensors, potentiometers, thermo-resistors or digital: speed sensor CH2: analog 0-5V: pressure sensors, potentiometers, thermo-resistors or digital: speed sensor CH3: analog 0-5V: pressure sensors, potentiometers, thermo-resistors CH4: analog 0-5V: pressure sensors, potentiometers, thermo-resistors More Channel Expansions can be connected to create a network. AiM network can support up to 16 expansion modules like GPS Module, Channel Expansion, TC Hub etc.

AiM MyChron Expansion Channel Multiplier MyChron Expansion channel multiplier improves MyChron5 and MyChron5 2T (and also MyChron4 and MyChron4 2T) performance, thanks to four additional channels and a further CAN bus connector. (Special order Item, ships within 3-4 days with free 2 day shipping) Through this last connector the systems can be connected to LCU-One Lambda controller and SmartyCam HD (and to GPS and Data key for MyChron4 systems). Thanks to its specific wirings, MyChron Expansion powers the systems and their peripherals with an external battery, avoiding internal battery consumption. MyChron Expansion features four inputs to connect the systems to an equal number of additional channels. All channels are easily configurable as analog through the system menu to sample data coming from: Exhaust gas valve position sensor (very important to understand at which RPM value the exhaust port opens) Wheel speed sensor: the first input on the left can be configured also as digital input No contact brake pedal position sensor No contact throttle pedal position sensor (to know if and when to accelerate) Brake pressure sensor Water temperature or cylinder head temperature (PT100 thermo-resistor only) Steering angle potentiometer (to highlight over/under steering situations) Brake pedal potentiometer Throttle pedal potentiometer MyChron Expansion is a complete, value-for-money instrument for professional kart analysis. Warning: MyChron Expansion DOES NOT support gear calculation.

AiM 4 Port Data Hub The acquisition of all essential data you need to evaluate your car performance needs the connection of many peripherals to your datalogger. This implies the presence of a great number of cables. To solve this problem, AiM developed Data Hub, the new CAN connection multiplier that works as an interface between all AiM loggers and their peripheral equipment. Each Hub connects the logger with four peripherals: i.e. LCU lambda controller, GPS08 Module and one or more TC Hub (thermocouples multiplier). Data Hub takes all the information you need to your logger with only one cable, minimizing wires overall. Data Hub with 1.5m cable length Auto or Kart use More Data Hub can be connected in sequence in order to increase the number of peripherals which can be connected. Data Hub is waterproof IP65.