Replacement O-rings (10 pcs) This complete O-ring kit consists of 10 universal ringed seals that prevent spillage. From time to time these can become damaged so it's a good idea to have a few on hand for last minute repairs.

ChillOut Systems Insulated Coolant Hose The Chillout Hose is insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. 6 to 10 feet of hose that connects your cooling garment to the driver cooling unit with ¼” fittings for a consistent flow cycle. If the hose is too long for your set-up, cut the hose to the desired length. Extra supply of matching shrink wrap included for a flawless, durable, clean look. 10' Length - Includes additional heat shrink tubing for custom sizing while maintaining a finished look. Male connectors, 2 pieces. Female dual-prong connector to connect cooler-1 piece Can be connected to other hoses to extend length including Y connector. Double insulation. One later to protect the hoses and insulation, the other to keep your coolant cool and efficient.

Quick-Release Ball Lock Pins (2 pcs) Machined from 100% stainless steel, these military-grade ball-lock pins secure the Quantum Cooler within the Cooling Base Plate. Designed to prevent unintentional release while simultaneously functioning as a quick release disconnect from base plate for fast swaps in the pits between sessions. If your Quantum Cooler will be used between multiple vehicles it's a good idea to have spare pins.

Dual Prong Adaptors Designed to withstand wear, the military-grade dual prong liquid connector maximizes the reliability of your driver cooling unit. The dual prong design latches securely, enabling the Chillout Hose to be linked to your system and preventing from unintentional release. Dual prong adapter connects Chillout cooling garments (or other brands’ cooling shirts with ¼” tubing) to the driver cooling system with ¼” adapters.

Coolant Formula Concentrate - 1.5L Non-toxic and biodegradable concentrate (1 parts coolant to 2 parts distilled water) that circulates through cooler and cooling garments, keeping you cool and your machine running in prime condition. ChillOut garments encase tubular veins within the material that cover a large surface area of the body – keeping you cool, dry, and focused. Mix 1 part coolant to 2 parts distilled water. We suggest you replace the ChillOut formula in the system at least once per season in order to prevent any organic growth in the cooler.

ChillOut Systems Insulated Coolant Hose The Chillout Hose is insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. 6 to 10 feet of hose that connects your cooling garment to the driver cooling unit with ¼” fittings for a consistent flow cycle. If the hose is too long for your set-up, cut the hose to the desired length. Extra supply of matching shrink wrap included for a flawless, durable, clean look. 10' Length - Includes additional heat shrink tubing for custom sizing while maintaining a finished look. Male connectors, 2 pieces. Female dual-prong connector to connect cooler-1 piece Can be connected to other hoses to extend length including Y connector. Double insulation. One later to protect the hoses and insulation, the other to keep your coolant cool and efficient.

Dash Mountable Wired Remote For Quantum Cooler Wired remote for all Quantum Pro Coolers and V3 Coolers purchased after May 2021. Featuring a 10 ft. cord and color digital display, the Dash Mountable Remote Control is designed to power your Pro Cooler on and off as well as adjust the temperature from anywhere in your vehicle. The compact design is 1.5 x 2.5 x 0.5 inches and weighs under 5 oz. This is a great addition if you are mounting your system in an out-of-reach area in your vehicle like the trunk or rear seat area. Note: For all Quantum Pro Cooler and V3 Coolers purchased after May 2021

Quantum V3 Carbon Base Plate Weighing in under 6 oz's, our 100% carbon fiber base plate upgrade reduces system weight by over 1.5 lbs. This is a huge weight savings for those who are trying to minimize weight and increase power to weight ratio. Compatible with the Quantum V2 and V3 Coolers.

Quantum PRO Carbon Base Plate Weighing in under 6 oz's, our 100% carbon fiber base plate upgrade reduces system weight by over 1.5 lbs. This is a huge weight savings for those who are trying to minimize weight and increase power to weight ratio. Compatible only with Quantum Pro Coolers

Single Prong Connectors These are used as replacement 1/4" connectors on the coolant hose coming from the cooler, connecting to the shirt. (sold as a pair) Designed to withstand wear, the medical-grade liquid connector maximizes the reliability of your driver cooling unit without the annoying "drip" when you disconnect. Prevented from unintentional release, the Shirt Adaptors lock together, linking the hose to your system securely. FEATURES: Medical-grade liquid connector INCLUDED: 2 x Single Tube Connectors (sold as a pair)

Break-away Coupling The break-away connectors are a unique latch assembly that consists of two independent mechanisms that secure together and breakaway at 9 lbs of pressure. Our break-away adapters are independent of the current shirt connectors so that they can be placed in a location on the tubing that is best to breakaway in an emergency situation. This latch design prevents unintentional release under standard operating conditions but allows for hands free release in an emergency. FEATURES: 9 lbs Release System INCLUDED: 1 x ¼” Hose Connector Male/Female (2 required per shirt)

Paragon Pro Cooling System Maintenance Additive This non-toxic bio-degradable "Defense Solution" contains a fungicide yet is safe to use in all driver cooling systems. Regular use of this additive will not only help clean the system but it will also improve the performance and life of the system pump. We recommend the use of 2 ounces of Maintenance Solution every time a system is used and 6 ounces for the large MPS systems. 16oz. bottle Regular use of the Maintenance Additive could add years of life to your system and help keep the system working at its peak performance.

Paragon’s O-Ring Pack is offered as a replacement for dried, cracked or torn O-rings on all Paragon Male Connectors. Compatible with all Paragon and Coolshirt fittings.

Paragon’s Everlast Ice allows for longer cooling periods when added to ice and water in all Paragon coolers and Paragon cooler bags. Paragon’s Everlast Ice should be kept in a freezer until ready for use. Compatible with existing non-Paragon coolers in the market.

Rapid Release - Shirt Side Handle The Rapid Release dry break system makes driver changes fast and effortless. No fumbling with tubes or connectors while under pressure, just a quick press and coolant/water starts flowing instantly. In an emergency, the connectors release when a force greater than 10 lbs is applied. This is the "Shirt Side" only. Features: Effortless dry break system Emergency release feature What's Included: 2 x 1/4" barbed quick release fittings 1 x driver side handle 2 x 36" reinforced, non-kinking extensions 2 x 1/4th to 5/16th barrel connectors 2 x 1/4th to 1/4th barrel connectors 2 x 36" reinforced cooling tubes

Rapid Release Kit - Cooling Shirt Quick Release The Rapid Release dry break system makes driver changes fast and effortless. No fumbling with tubes or connectors while under pressure, just a quick press and coolant/water starts flowing instantly. In an emergency, the connectors release when a force greater than 10 lbs. is applied.The kit comes with two style car mounts, a roll bar mount, and a flat surface mount which connects to the cooling system. Also included is a driver-side handle that quickly connects your shirt or balaclava to the car mount already fixed in the car. The car mounts can be fitted to the roll bar with the roll bar mount, whereas the flat mount can be mounted in various places, like the transmission tunnel, seat, etc via the flat-mount. Features: Effortless dry break system Emergency release feature What's Included: 2 x 1/4" barbed quick-release fittings 1 x flat surface mount 1 x roll-bar mount 1 x driver side handle 2 x 36" reinforced, non-kinking extensions 2 x 1/4th to 5/16th barrel connectors 2 x 1/4th to 1/4th barrel connectors

Rapid Release - Car Side Mounts The Rapid Release dry break system makes driver changes fast and effortless. No fumbling with tubes or connectors while under pressure, just a quick press and coolant/water starts flowing instantly. In an emergency, the connectors release when a force greater than 10 lbs is applied. This is the "Car side" of the kit only. Features: Effortless dry break system Emergency release feature What's Included: 2 x 1/4" barbed quick release fittings 1 x flat surface mount 1 x roll-bar mount

Paragon Fluid Connector - 1/4" Male (shirt side) Fitting for Paragon and other driver cooling garments. Typically this connector is used on the water hose attached to the shirt. (shirt side) 1/4" OD Male Fluid Connector 3/16" ID Full compatibility with Coolshirt brand female connectors Safety Pull Sold individually NOTE: If you are using the Chillout Systems Pro Touring Series or Club Series shirts with the Paragon or COOLSHIRT cooling systems, you will want to purchase the appropriate male or female connector depending on your setup.

Paragon Guardian Fluid Connector - 1/4 " Female (safety pull) Fitting for Paragon and other driver cooling garments. Typically this connector is used on the water hose side coming from the cooler connecting to the shirt. (car or cooler side) 1/4" OD - 3/16" ID Female Fluid Connector Full compatibility with Coolshirt brand male connectors Sold individually NOTE: If you are using the Chillout Systems Pro Touring Series or Club Series shirts with the Paragon or COOLSHIRT cooling systems, you will want to purchase the appropriate male or female connector depending on your setup.

Paragon Guardian Fluid Connector - 5/16" Female (large - safety pull) Fitting for Paragon and other driver cooling garments. Typically this connector is used on the water hose side coming from the cooler connecting to the shirt. (car or cooler side) 5/16" OD Female Fluid Connector with 1/4" ID Full compatibility with Coolshirt brand male connectors Sold individually NOTE: If you are using the Chillout Systems Pro Touring Series or Club Series shirts with the Paragon or COOLSHIRT cooling systems, you will want to purchase the appropriate male or female connector depending on your setup.

Paragon Fluid Connector - 5/16" (large) Male (shirt side) Fitting for Paragon and other driver cooling garments. Typically this connector is used on the water hose attached to the shirt. (shirt side) 5/16" Male Fluid Connector - 1/4" ID Full compatibility with Coolshirt brand female connectors Safety Pull Sold individually NOTE: If you are using the Chillout Systems Pro Touring Series or Club Series shirts with the Paragon or COOLSHIRT cooling systems, you will want to purchase the appropriate male or female connector depending on your setup.