AiM MXT 1.3 Dash - Data Logger (10" Display) The MXT 1.3 has the largest display of the AiM auto data acquisition systems (10 inches). An evolution of the MXG that was designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS09c Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 10" display makes it perfect for wide cockpits installation. Typically ships within 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List In the box: MXT 10" Dash Logger 37pin harness GPS module USB cable WiFi ConnectivityConfigure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection. CAN OutputWith the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities. High contrast TFT displayA high contrast TFT display identifies MXT at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons. Flexible alarmsMXT features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors.Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Two digital outputsMXT 1.3 features two digital outputs. Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: GPS09 Module (included in the kit) Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Rev.2.1 Cameras and All SmartyCam3 Versions Included in the box: AiM MXT 1.3 Dash Logger 37-pin primary harness with bulkhead adapter 1.3m GPS 09 USB download cable Optional:Secondary Harness: 2 digital inputs, 4 analog inputs, 2nd CAN input Technical Specifications: (some specs will change with the MXT, shown are mostly MXG Specs) Display: 10” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: TBD Power consumption: 400 mA CAN connections: 3 Analog inputs: 8 fully configurable, max 500 Hz each Resolution: 800x480 pixels Contrast: TBD Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 Motorsport connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 4 Speed inputs, lap signal, coil RPM input Digital outputs: 2 (1 Amp max each) Second CAN: Yes (optional 22-pin harness needed) WiFi connection: Yes Internal memory: 4 GB Ambient light sensor: Yes Waterproof: IP65

AiM MXG 1.3 Dash - Data Logger The MXG 1.3 has the largest display of the AiM auto data acquisition systems at 7". An evolution of the MXG that was designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS09c Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 7" display makes it perfect for wide cockpits installation. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List   WiFi ConnectivityConfigure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection. CAN OutputWith the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities. High contrast TFT displayA high contrast TFT display identifies MXG at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons. Flexible alarmsMXG features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors.Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Two digital outputsMXG 1.3 features two digital outputs. Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: GPS09 Module (included in the kit) Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Rev.2.1 Cameras and All SmartyCam 3 Versions Included in the box: AiM MXG 1.3 Dash Logger 37-pin primary harness with bulkhead adapter 1.3m GPS 09 USB download cable Optional:Secondary Harness: 2 digital inputs, 4 analog inputs, 2nd CAN input Technical Specifications: Display: 7” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 950 g Power consumption: 400 mA CAN connections: 3 Analog inputs: 8 fully configurable, max 1,000 Hz each Resolution: 800x480 pixels Contrast: 1000:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 Motorsport connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 4 Speed inputs, lap signal, coil RPM input Digital outputs: 2 (1 Amp max each) Second CAN: Yes (optional 22-pin harness needed) WiFi connection: Yes Internal memory: 4 GB Ambient light sensor: Yes Waterproof: IP65

AiM MXS 1.3 Dash 5" TFT Display - Data Logger The MXS 1.3 dash data logger for motorsports. MXS 1.3 is an evolution of the MXS and is used and designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS09c Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 5" display has been specifically designed for small cockpits installation. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List  WiFi ConnectivityConfigure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection.Note: Special order Item - Item usually ships within 3-4 days. Free 2 day shipping on this item CAN Output With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.High contrast TFT displayA high contrast TFT display identifies MXS at the first glance.An ambient light sensor keeps the backlight at optimum brightness levels.Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two push buttons. Flexible alarmsMXS features six configurable RGB alarm LEDs: you choose the conditions, you choose the colors.Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Two digital outputs MXS features two digital outputs.Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light array Choose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Camera Included in the box: AiM MXS 1.3 Dash Logger 37-pin primary harness with bulkhead adapter 1.3m GPS09 USB download cable Optional:Secondary Harness: 2 digital inputs, 4 analog inputs, 2nd CAN input Technical Specifications of the AiM MXS: Display: 5” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 530g Power consumption: 400 mA CAN connections: 3 Analog inputs: 6 fully configurable, max 1,000 Hz each Resolution: 800x480 pixels Contrast: 600:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 Motorsport connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 4 Speed inputs, lap signal, coil RPM input Digital outputs: 2 (1 Amp max each) Second CAN: Yes (optional 22-pin harness needed) WiFi connection: Yes Internal memory: 4 GB Ambient light sensor: Yes Waterproof: IP65

AiM MXP 1.3, 6" Color TFT Dash Logger MXP data logger offers 50% more display area than the 5'' MXS display, in a similar dimension. The dash logger has an integrated shift array, configurable multicolor alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, GPS Module, inertial platform, analog and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections. Typically ships in 3-5 days Click here for Stock ECU List | Click here for Racing ECU List The MXP is also available in the Strada version for street use without data logging capabilities. The MXP Dash Logger has a wide range of data sources. MXP samples data coming from your ECU, the GPS Module, the 9 axis inertial platform (accelerometer, gyro and magnetometer), 8 fully configurable analog inputs, 6 digital inputs, predefined math channels and second CAN. Performance and data acquired can also be incremented adding up to eight expansion modules. Freely configurable pages. You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managedpushing one or two pushbuttons. High Contrast TFT Display A high contrast TFT display identifies MXP at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Flexible alarms & custom street icons MXP features five configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons. Two digital outputs MXP features two digital outputs. The two digital outputs (out) are LOW SIDE type (switch to ground): they can be configured in order to be turned on/off depending on the value of the analog or digital inputs. They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Camera inputs, also for rear mirror camera Two analog camera inputs are available, to swap your display into a mirror camera, through pushbutton command or event management.

AiM MXG 1.2/1.3 Strada Wide size color TFT dash for road use, currently has the largest display of the AiM auto dash systems (7 inches). The "Strada" version is much the same as the MXG 1.3 dash logger but without the data logging capabilities. The "Stada Logger" option can be added at anytime to bring it to a full data logger. The MXG 1.2/1.3 comes in 2 versions, standard and street icon version. Both versions come with a standard 14pin harness for power and ECU connection. If no ECU is available, the optional 23pin harness will be required along with sensors and patch cables. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List High contrast TFT displayA high contrast TFT display identifies MXG at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons. Flexible alarms & custom street iconsMXG features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons. Digital outputsMXG 1.2/1.3 Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU.This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: GPS09 Module Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Rev.2.1 Cameras and All SmartyCam 3 Versions Included in the box: AiM MXG 1.2/1.3 Strada Dash 14-pin power/CAN harness USB download cable Optional: 23-pin harness (2 digital, 8 analog channels) Typical for non-ECU vehicles wanting external sensors like temps and pressures. GPS Module Technical Specifications: Display: 7” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 950 g Power consumption: 400 mA CAN connections: 2 Analog inputs: 8 fully configurable, max 500 Hz each Resolution: 800x480 pixels Contrast: 1000:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 AMP connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 1 Speed inputs, 1 coil RPM input Digital outputs: 1 (1 Amp max) Second CAN: Yes (optional 23-pin harness needed) Ambient light sensor: Yes Waterproof: IP65

AiM MXS 1.2/1.3 Strada The MXS 1.2/1.3 Strada, compact size color TFT dash for road use. The "Strada" version is much the same as the MXS 1.3 dash logger but without the data logging capabilities. The "Stada Logger" option can be added at anytime to bring it to a full data logger. The MXS 1.2/1.3 comes in 2 versions, standard and street icon version. Both versions come with a standard 14pin harness for power and ECU connection. If no ECU is available, the optional 23pin harness will be required along with sensors and patch cables. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List High contrast TFT displayA high contrast TFT display identifies MXS at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons. Flexible alarms & custom street iconsMXS Strada features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons. Digital outputsMXS 1.2/1.3 Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU.This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: GPS09 Module Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Rev.2.1 Cameras and All SmartyCam 3 Versions Included in the box: AiM MXS 1.2/1.3 Strada Dash 14-pin power/CAN harness USB download cable Optional: 23-pin harness (2 digital, 8 analog channels) Typical for non-ECU vehicles wanting external sensors like temps and pressures. GPS Module Technical Specifications: Display: 5” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 480 g Power consumption: 400 mA CAN connections: 2 Analog inputs: 8 fully configurable, max 500 Hz each Resolution: 800x480 pixels Contrast: 600:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 AMP connectors + 1 Binder connector Alarm LEDs: 6 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 1 Speed inputs, 1 coil RPM input Digital outputs: 1 (1 Amp max) Second CAN: Yes (optional 23-pin harness needed) Ambient light sensor: Yes Waterproof: IP65

AiM MXm Compact Dash Logger The AiM MXm is the smallest full function dash logger which provides all the info needed by racers: it samples and shows key info like speed, lap times, RPM, gears, it has a 9 axis inertial platform, multiple math channels and much more. Its strengths are the compactness, just 5.5" x 3.5", which makes MXm perfect to be fit into any kind of car, bike or SXS UTV, and its plug-and-play usage - complete but simple. Typically ships in 3-5 days With full LCD backlit, customizable color display with 5 LED shift lights and 2 configurable RGB LED warning lights, the MXm is the perfect device for both Pro and Amateur racers. A wide range of data sources MXm samples data coming from your ECU, the internal GPS, the inertial platform (accelerometer, gyro and magnetometer) along with: 4 fully configurable analog inputs 3 digital inputs (2 speed inputs + 1 coil RPM input) and predefined math channels. The MXm can also be connected to many different stock or racing specific ECU's via CAN or K/Line. Click here for a complete list of ECU's Integrated shift lights and alarms MXm features a 5 LED shift light array. Choose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required.MXm also features two fully configurable RGB alarm LEDs: you can choose the conditions which turn them on/off, their color, select a solid alarm - or flashing one - and the flashing frequency. Two power outputs MXm features two power outputs that can drain up to 15 A each. The two power outputs can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. The MXm can also be connected to a CAN data hub, LCU-One Lambda Controller and the SmartyCam series of cameras. Race Studio 3 Software Race Studio 3 is the true 'engine' of your MXm, as it will manage all your activities related to configuration. The AiM MXm offers secure downloadable data via Wi-Fi using the the Race Studio3 software.With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, math channels, display pages, digital outputs, alarms, shift lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras. MXm Specifications:  Display resolution: 268 x 128 pixels Backlight: 7 configurable RGB colors Ambient light sensor: Yes Shift lights: 5 configurable RGB LEDs Alarm LEDs: 2 configurable RGB LEDs CAN connections: 2 ECU connections: CAN, RS232 or K-Line ECU compatibility: +1,000 industry leading ECUs GPS: Integrated External modules: Lambda Controller and SmartyCam HD Analog inputs: 4 fully configurable, max 1,000 Hz each Digital inputs: 2 speed inputs, coil RPM input Digital outputs: 2 high-side Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Wi-Fi connection: Yes Internal memory: 4 GB non-volatile Body: Glass fiber reinforced Nylon Pushbuttons: Metallic Connectors: 37 pins Motorsport connector + 4 pins power connector Dimensions: 137x88.4x31.9 mm Weight: 330 g Waterproof: IP65 In The Box: AiM MXm Compact Dash Logger 37 pins standard harness USB cable Race Studio 3 software

AiM Solo 2 DL - GPS Lap Timer/Data Logger V2 Smarter, smaller and more powerful than ever: the brand new Solo 2 DL with ECU connection option via OBDII port. Click here for Stock ECU List | Click here for Racing ECU List Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles.New Firmware - Now the Solo 2 DL can do the following: (new units and current units can be upgraded with the latest firmware update to be compatible) Channel ExpansionChannel Expansion for getting four analog channels, such as potentiometers, pressure sensors or thermoresistences. AiM ACC2 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. SmartyCam3 ConnectionsGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam3 cameras, that will show them in overlay in a 60-fps video. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5 Click here for Stock ECU List | Click here for Racing ECU List

AiM Solo 2 DL - GPS Lap Timer/Data Logger Smarter, smaller and more powerful than ever: the brand new Solo 2 DL with ECU connection via RS232/CAN unterminated cable. Click here for Stock ECU List | Click here for Racing ECU List Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles.New Firmware - Now the Solo 2 DL can do the following: (new units and current units can be upgraded with the latest firmware update to be compatible) Channel ExpansionChannel Expansion for getting four analog channels, such as potentiometers, pressure sensors or thermoresistences. AiM ACC2 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. SmartyCam3 ConnectionsGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam3 cameras, that will show them in overlay in a 60-fps video. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5 Click here for Stock ECU List | Click here for Racing ECU List

AiM Solo2 DL - GPS Lap Timer/Data Logger The Solo2 DL with direct power and RPM connection via the RPM harness. Perfect for vehicles without an ECU but still want all the benefits of RPM logging and expansion to either a SmartyCam, Lambda Controller or ACC2 / ACC3. Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles.New Firmware - Now the Solo 2 DL can do the following: (new units and current units can be upgraded with the latest firmware update to be compatible) Channel ExpansionChannel Expansion for getting four analog channels, such as potentiometers, pressure sensors or thermoresistences. AiM ACC2 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. SmartyCam3 ConnectionsGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam3 cameras, that will show them in overlay in a 60-fps video. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5 Click here for Stock ECU List | Click here for Racing ECU List

AiM Solo 2 - GPS Lap Timer Smarter, smaller and more powerful than ever: the new Solo 2 is the game-changer we were waiting for! Not just a lap-timer, the AiM Solo 2 is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time.Is that enough? Of course not. You should know that the SOLO 2 has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, SOLO 2 will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, SOLO 2 is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin Graphical 128x64 pixel display 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 98mmx73.7mmx30.2mm size, 240g weight with battery

Ford Shelby GT350 / GT350R Lap Timer and Data Pack w/Suction Cup Mount Now available from Product41 - Proper ECU protocol with steering angle and brake psi. (2015-2019 models only, All S550 platform, GT's and GT350's) AiM, The world leader in Data Acquisition Systems has just release the latest Ford ECU template that can be used with the AiM Solo2 DL in the Shelby GT350 and GT350R's for capturing and recording some key elements of your car, engine and driver while on track. With the use of the AiM Solo2 DL, you can record RPM, speed, acceleration, braking, independent wheel speeds, coolant temp and lap times to name a few. Better than any track app, this data can be downloaded, reviewed and even overlayed from other track days or sessions. FREE standard ground shipping. At Product41 we believe in the monitoring of both vehicle and driver performance. The AiM Solo2 DL GPS Lap timer with ECU connection is the perfect addition to any performance vehicle being used for autocross, auto racing or track days. Ford has engineered and produced an incredible vehicle with the GT350, this hands down will be one of the best upgrades you can give yourself. All of the GPS and ECU based data recorded on Solo2 DL can be deeply analyzed with the powerful Race Studio 2 professional software. Graphs, histograms and tables will help you understand your performance at all positions on the track. Data Package complete with AiM Solo2 DL, OBD2 connection and Suction Cup Mount The Solo2 DL is easily installed by way of a heavy duty RAM suction cup mount and connects to the ECU via the CAN/ODBll port with one simple plug. The finished look is a clean and can be easily removed. Here is a short list of data the Solo2 DL will capture and record for later viewing from the vehicle and engine ECU.  Engine RPM Engine Coolant Temp Intake Air Temp Throttle Pedal Position Transmission Temp Engine oil temp All 4 Wheel Speeds - independent All 4 Wheel Tire Pressures - independent (with OEM TPMS sensors installed) Gear Selection (not through OBDII, to be calculated from driving) Vehicle Battery Voltage Steering Wheel Angle Brake Pressure Find your track with the powerful GPS technology The most important feature of Solo is to show your lap times.When Solo is powered up, it automatically recognizes the start/finish line coordinates of the track you are visiting based on the huge list of World tracks stored on Solo's internal memory, this allows very precise lap times with very little effort Select your race mode With a simple keyboard configuration Solo can manage four different forms of motorsports: speed races in a closed circuit, point-to-point races, regularity and performance tests.In all of these different situations Solo gives the proper information during the test and powerful data review immediately after each session. Choose your lap time mode The Solo2 DL is fully configurable and includes different lap time display modes: Rolling lap time Static lap time Predictive lap time, calculated during the current lap Predictive lap time, calculated as difference between the above and the best lap of the session. Best lap The AiM Solo2 DL can also be connected to any of the powerful AiM SmartyCam3 series of cameras. This will allow your data to be imbedded into the video with overlay.