AiM MXS 1.3 Dash 5" TFT Display - Data Logger The MXS 1.3 dash data logger for motorsports. MXS 1.3 is an evolution of the MXS and is used and designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS09c Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 5" display has been specifically designed for small cockpits installation. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List  WiFi ConnectivityConfigure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection.Note: Special order Item - Item usually ships within 3-4 days. Free 2 day shipping on this item CAN Output With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.High contrast TFT displayA high contrast TFT display identifies MXS at the first glance.An ambient light sensor keeps the backlight at optimum brightness levels.Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two push buttons. Flexible alarmsMXS features six configurable RGB alarm LEDs: you choose the conditions, you choose the colors.Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Two digital outputs MXS features two digital outputs.Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light array Choose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Camera Included in the box: AiM MXS 1.3 Dash Logger 37-pin primary harness with bulkhead adapter 1.3m GPS09 USB download cable Optional:Secondary Harness: 2 digital inputs, 4 analog inputs, 2nd CAN input Technical Specifications of the AiM MXS: Display: 5” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 530g Power consumption: 400 mA CAN connections: 3 Analog inputs: 6 fully configurable, max 1,000 Hz each Resolution: 800x480 pixels Contrast: 600:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 Motorsport connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 4 Speed inputs, lap signal, coil RPM input Digital outputs: 2 (1 Amp max each) Second CAN: Yes (optional 22-pin harness needed) WiFi connection: Yes Internal memory: 4 GB Ambient light sensor: Yes Waterproof: IP65

AiM MXm Compact Dash Logger The AiM MXm is the smallest full function dash logger which provides all the info needed by racers: it samples and shows key info like speed, lap times, RPM, gears, it has a 9 axis inertial platform, multiple math channels and much more. Its strengths are the compactness, just 5.5" x 3.5", which makes MXm perfect to be fit into any kind of car, bike or SXS UTV, and its plug-and-play usage - complete but simple. Typically ships in 3-5 days With full LCD backlit, customizable color display with 5 LED shift lights and 2 configurable RGB LED warning lights, the MXm is the perfect device for both Pro and Amateur racers. A wide range of data sources MXm samples data coming from your ECU, the internal GPS, the inertial platform (accelerometer, gyro and magnetometer) along with: 4 fully configurable analog inputs 3 digital inputs (2 speed inputs + 1 coil RPM input) and predefined math channels. The MXm can also be connected to many different stock or racing specific ECU's via CAN or K/Line. Click here for a complete list of ECU's Integrated shift lights and alarms MXm features a 5 LED shift light array. Choose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required.MXm also features two fully configurable RGB alarm LEDs: you can choose the conditions which turn them on/off, their color, select a solid alarm - or flashing one - and the flashing frequency. Two power outputs MXm features two power outputs that can drain up to 15 A each. The two power outputs can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. The MXm can also be connected to a CAN data hub, LCU-One Lambda Controller and the SmartyCam series of cameras. Race Studio 3 Software Race Studio 3 is the true 'engine' of your MXm, as it will manage all your activities related to configuration. The AiM MXm offers secure downloadable data via Wi-Fi using the the Race Studio3 software.With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, math channels, display pages, digital outputs, alarms, shift lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras. MXm Specifications:  Display resolution: 268 x 128 pixels Backlight: 7 configurable RGB colors Ambient light sensor: Yes Shift lights: 5 configurable RGB LEDs Alarm LEDs: 2 configurable RGB LEDs CAN connections: 2 ECU connections: CAN, RS232 or K-Line ECU compatibility: +1,000 industry leading ECUs GPS: Integrated External modules: Lambda Controller and SmartyCam HD Analog inputs: 4 fully configurable, max 1,000 Hz each Digital inputs: 2 speed inputs, coil RPM input Digital outputs: 2 high-side Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Wi-Fi connection: Yes Internal memory: 4 GB non-volatile Body: Glass fiber reinforced Nylon Pushbuttons: Metallic Connectors: 37 pins Motorsport connector + 4 pins power connector Dimensions: 137x88.4x31.9 mm Weight: 330 g Waterproof: IP65 In The Box: AiM MXm Compact Dash Logger 37 pins standard harness USB cable Race Studio 3 software

AiM MX UTV Data Logging Dash/Gauges Absolute freedom with AiM MX UTV custom dash logger for the Arctic Cat Wildcat. MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Supported models:- Wildcat XX Speed, RPM, Coolant Temp, Transmission Belt Temp and GPS Lap times are just a few things that can be show and data logged. Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type, like the Arctic Cat, directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector. MX UTV acquires and shows the following important information: Data coming from your ECU Transmission belt temperature, by using the infrared sensor included in the kit Model: Arctic Cat WildcatChannels that will be data logged and or displayed: Speed RPM with configurable RGB shift lights Gear Engine Coolant Temp (ECT) Throttle Position (TPS) Brake Switch Transmission Belt Temperature via infrared temp sensor Transmission belt temperature, no more worries. The transmission belt temperature is one of the main concern for UTV drivers. Now you can monitor actual belt surface temperature in Real-Time.Thanks to the infrared temperature sensor, included in the kit, it is possible to constantly check the temperature, reading it directly on the display.Two RGB alarm LEDs will turn on when the temperature gets close to the critical level. Find always your track and your data as well Thanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours. GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module. - Expandable to run LCU-one CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning. - SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions. What's in the box: AiM MX UTV Dash Unit AiM mounting plate and hardware Arctic Cat ECU power harness Infrared belt temp sensor Patch cable for sensor MX UTV setup and user guide

AiM MX UTV Data Logging Dash/Gauges for Yamaha YXZ Absolute freedom with AiM MX UTV custom dash logger for the Yamaha YXZ. MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Supported models:- YXZ 1000R- YXZ 1000R SS- YXZ 1000R SS SE Speed, RPM, Coolant Temp, Oil Temp or Oil Pressure and GPS Lap times are just a few things that can be show and data logged.Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector. MX UTV acquires and shows the following important information: Data coming from your ECU Oil Temp or Oil Pressure, by using the supplied sensor included in the kit. (choose sensor type above when ordering) Model: Yamaha YXZ 2016, 2017Channels that will be data logged and or displayed: Speed RPM with configurable RGB shift lights Gear Engine Coolant Temp (ECT) Throttle Position (TPS) (some models) Brake Switch (some models) Engine Oil Temp or Engine Oil Pressure Engine Oil Temp or Engine Oil Pressure for Yamaha models On the Yamaha, the the transmission belt temperature sensor is replaced with either an engine oil temp sensor or oil pressure sensor (oil psi add: $75.00). Temperature or Pressure can be displayed directly on the display.Two RGB alarm LEDs will turn on when the temperature or pressure gets close to the critical level. Find always your track and your data as wellThanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours. GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module. - Expandable to run LCU-one CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning. - SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions. What's in the box: AiM MX UTV Dash Unit AiM mounting plate and hardware ECU power harness Engine oil temp or oil pressure sensor Patch cable for sensor MX UTV setup and user guide

AiM MX UTV Data Logging Dash/Gauges Absolute freedom with AiM MX UTV custom dash logger for the Can-Am Maverick X3 MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Speed, RPM, Coolant Temp, Transmission Belt Temp and GPS Lap times are just a few things that can be show and data logged. Supported models:- Maverick- Maverick Trail- Maverick Sport Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type, like the Can-Am X3 directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector. MX UTV acquires and shows the following important information: Data coming from your ECU Transmission belt temperature, by using the infrared sensor included in the kit Model: CAN-AM Maverick X3 and Turbo modelChannels that will be data logged and or displayed: Speed RPM with configurable RGB shift lights Gear Engine Coolant Temp (ECT) Throttle Position (TPS) Brake Switch Instant Fuel Flow Transmission Belt Temperature via infrared temp sensor Instant Fuel Consumed (Turbo model) Boost Pressure (Turbo model) Intake Air Temp (Turbo model) Transmission belt temperature, no more worries. The transmission belt temperature is one of the main concern for UTV drivers. Now you can monitor actual belt surface temperature in Real-Time.Thanks to the infrared temperature sensor, included in the kit, it is possible to constantly check the temperature, reading it directly on the display.Two RGB alarm LEDs will turn on when the temperature gets close to the critical level. Find always your track and your data as wellThanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours. GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module. - Expandable to run LCU-one CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning. SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions. What's in the box: AiM MX UTV Dash Unit AiM mouting plate and hardware ECU power harness Infrared belt temp sensor Patch cable for sensor MX UTV setup and user guide

AiM MX UTV Data Logging Dash/Gauges for Polaris RZR Absolute freedom with AiM MX UTV custom dash logger for the Polaris RZR. MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Supported models:- RZR - RS1- RZR - XP1000- RZR - XP Turbo- RZR - PRO Speed, RPM, Coolant Temp, Transmission Belt Temp and GPS Lap time are just a few things that can be show and data logged.Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector. MX UTV acquires and shows the following important information: Data coming from your ECU Transmission belt temperature, by using the infrared sensor included in the kit Model: Polaris RZRChannels that will be data logged and or displayed: Speed RPM with configurable RGB shift lights Engine Coolant Temp (ECT) Throttle Position (TPS) Brake Switch Fuel Rate Transmission Belt Temperature via infrared temp sensor Boost Pressure (turbo model only) Charge Air Intake temp (turbo model only) Transmission belt temperature, no more worries. The transmission belt temperature is one of the main concern for UTV drivers. Now you can monitor actual belt surface temperature in Real-Time.Thanks to the infrared temperature sensor, included in the kit, it is possible to constantly check the temperature, reading it directly on the display.Two RGB alarm LEDs will turn on when the temperature gets close to the critical level. Find always your track and your data as wellThanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours. GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module. - Expandable to run LCU-One CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning. - SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions. What's in the box: AiM MX UTV Dash Unit AiM mounting plate and hardware ECU power harness Infrared belt temp sensor Patch cable for sensor MX UTV setup and user guide

AiM Solo2 DL - GPS Lap Timer/Data Logger The Solo2 DL with direct power and RPM connection via the RPM harness. Perfect for vehicles without an ECU but still want all the benefits of RPM logging and expansion to either a SmartyCam, Lambda Controller or ACC2 / ACC3. Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles.New Firmware - Now the Solo 2 DL can do the following: (new units and current units can be upgraded with the latest firmware update to be compatible) Channel ExpansionChannel Expansion for getting four analog channels, such as potentiometers, pressure sensors or thermoresistences. AiM ACC2 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. SmartyCam3 ConnectionsGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam3 cameras, that will show them in overlay in a 60-fps video. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5 Click here for Stock ECU List | Click here for Racing ECU List

AiM Solo 2 DL - GPS Lap Timer/Data Logger Smarter, smaller and more powerful than ever: the brand new Solo 2 DL with ECU connection via RS232/CAN unterminated cable. Click here for Stock ECU List | Click here for Racing ECU List Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles.New Firmware - Now the Solo 2 DL can do the following: (new units and current units can be upgraded with the latest firmware update to be compatible) Channel ExpansionChannel Expansion for getting four analog channels, such as potentiometers, pressure sensors or thermoresistences. AiM ACC2 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. SmartyCam3 ConnectionsGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam3 cameras, that will show them in overlay in a 60-fps video. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5 Click here for Stock ECU List | Click here for Racing ECU List

AiM Solo 2 DL - GPS Lap Timer/Data Logger V2 Smarter, smaller and more powerful than ever: the brand new Solo 2 DL with ECU connection option via OBDII port. Click here for Stock ECU List | Click here for Racing ECU List Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles.New Firmware - Now the Solo 2 DL can do the following: (new units and current units can be upgraded with the latest firmware update to be compatible) Channel ExpansionChannel Expansion for getting four analog channels, such as potentiometers, pressure sensors or thermoresistences. AiM ACC2 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. SmartyCam3 ConnectionsGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam3 cameras, that will show them in overlay in a 60-fps video. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5 Click here for Stock ECU List | Click here for Racing ECU List

Motocross Racing - AiM Solo2 DL - GPS Lap Timer/Data Logger for MX The Solo 2 DL with ECU connection. There is more than 1,000 protocols for over 1,000 ECU’s in the database to allow the Solo 2 DL easy connection to your Engine Control Unit (ECU) providing you a lot of information with just one cable. Connecting to the ECU can be done via ODB2 port, RS232/CAN unterminated cable. Direct ECU connection for Honda, Suzuki, TM Racing bikes or direct to AiM Taipan, GET Power or Vortex racing ECU's Connection for bikes without ECU's via Coil RPM input:Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V each signal) or pulse signals (150-450 V ignition coil trigger – primary circuit). Click here for Stock ECU List | Click here for Racing ECU List Smarter, smaller and more powerful than ever: Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 10 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time using the predictive lap time function. The LED's can even be configured as a shift light. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo 2 DL is available with the following cable options: AiM Taipan, Taipan Y, Yarara (select this ECU connection harness above if using this ECU. Connects to Handlebar switch also) Honda TM Racing Suzuki GET Vortex X10 OBD2 Cable RS232/CAN Serial Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on bikes without ECU's. Motocross Tracks, Fields, Hill-Climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a list of stock ECU connections available via direct connection: Thousands of stock and aftermarket ECU connections available. Links below for full list. AiM Taipan ECU AiM Taipan Y ECU (Yamaha) Vortex X10 GET Power GET GP1 EVO Honda CRF250 from 2010 Honda CRF450 from 2009 Suzuki RMZ 250 4 stroke 2010-2013 Suzuki RMZ 450 4 stroke 2008-2013 TM Racing SMX 450 FI from 2015 TM Racing MX 250 FI from 2015 TM Racing MX 450 FI from 2015 TM Racing Enduro 250 FI from 2015 TM Racing Enduro 450 FI from 2015 Click here for Stock ECU List | Click here for Racing ECU List

Motocross Racing - AiM Solo 2 - GPS Lap Timer for MX AiM Solo 2 - GPS Lap TimerThe AiM Solo 2, smarter, smaller and more powerful than ever: the new Solo 2 is the game-changer we were waiting for! Not just a lap-timer, the AiM Solo 2 is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 10 configurable RGB LEDs ready to inform you Sector to Sector, if you are improving or not in live time Predictive lap time function Also, the SOLO 2 has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, SOLO 2 will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Motocross Tracks, Fields, Hill-Climbs… Wherever you are, whatever you are driving or riding, Solo 2 is exactly what you need and what you always needed. Aim Solo 2 racing lap timer can manage different types of races, Speed races in a closed circuit, Point to-point races, Regularity, Performance tests (0-60 mph etc.) In each of these configurations, Solo 2 gives you the correct information during the test and powerful data review immediately after each session. Shows and records for later reviewing; speed, lap times, sector times and track mapping with elevation WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin Graphical 128x64 pixel display 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery

IBTS Replacement IR Sensor Replacement IR CVT belt temp sensor for the AiM MX-UTV and IBTS belt temp gauge systems. 10:1 FOV Up to 250 degree Celsius

MX UTV Polaris RZR 570 ECU Harness This harness connects the AiM Sports MX-UTV dash logger to the ECU of the Polaris RZR 570. This plugs directly into the diagnostic or ODBII port. This is specific to the 570 model.

MX UTV Arctic Cat Wildcat ECU Harness This harness connects the AiM Sports MX UTV dash logger to the ECU of the Arctic Cat Wildcat UTV. This plugs into the diagnostic or ODBII port. Replacement Harness.

MX UTV Yamaha YXZ ECU Harness This harness connects the AiM Sports MX UTV dash logger to the ECU of the Yamaha YXZ. This plugs directly into the diagnostic or ODBII port.

MX UTV Polaris RZR ECU Harness This harness connects the AiM Sports MX UTV dash logger to the ECU of the Polaris RZR. This plugs directly into the diagnostic or ODBII port.

MX UTV Can-Am Maverick ECU Harness This harness connects the AiM Sports MX UTV dash logger to the ECU of the Can Am Maverick. This plugs into the diagnostic or ODBII port.

Patch Cable 712-719 - 2.5m length AiM patch cable. 712 4-pin M / 719 4-pin F. Standard replacement cable between an AiM MX-UTV data logger and belt temp sensor. (2 seater) Common uses: EVO4 data logger to sensor EVO4S data logger to sensor MX-UTV to IR belt temp sensor IBTS gauge to IR belt temp sensor Channel Expansion

Patch Cable 712-719 - 4m length AiM patch cable. 712 4-pin M / 719 4-pin F. Standard replacement cable for the AiM MX-UTV data logger and IR belt temp sensor and IBTS belt temp gauge. (4 seater) Common uses: EVO4 data logger to sensor EVO4S data logger to sensor MX-UTV to IR belt temp sensor IBTS gauge to IR belt temp sensor Channel Expansion

AiM MX-UTV V-Shape Bracket - Roll Bar Mount Kit The RAM-B-108BU consists of a 1" diameter rubber ball connected at a right angle to a V-shaped base. Perfect for mounting the AiM MX-UTV for roll bars. The RAM-B-108BU accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. The kit comes with 95mm arm, 1" ball on diamond plate (RAM-B-238U) 33-57mm hose clamp, 19-44mm hose clamp and rubber sleave optimal for mounting the AiM MX-UTV Dash Logger.

AiM Solo2 / Solo2 DL Mount for Motocross Bikes (with cross bar) AiM Solo2 and Solo2 DL mounting option for motocross bikes with handlebar brace. Securely mount your Solo2 or Solo2 DL GPS lap timer / Data logger. In the box: Bar pad Transparent protection cover Mounting bracket (4) 12 mm M3 screws Installation guide Mount ONLY - No electronics