Products

AiM MyChron RPM Sensor - Wire/Clip AiM RPM sensor wire and clip to be used with the MyChron4, MyChron5 and MyChron6 kart data systems to pick up RPM. Compatible with 2 stoke and 4 stoke engines. Also known as a tach wire or tach lead.

AiM MyChron TC Patch Cable $50.00

AiM MyChron TC Patch Cable - Yellow AiM MyChron thermocouple patch cable. 1.5m length, 712 3-pin/m to K-style/f - yellow. Used for thermocouple (TC) sensors such as EGT and CHT. For Kart Data Systems with single temp input (3pin).

AiM MyChron TR Patch Cable $50.00

AiM MyChron TR Patch Cable - Black AiM MyChron thermoresister patch cable. 1.5m length, 712 3-pin/m to 719 4-pin/f - black used typically to connect the MyChron to a temp sensor such as water. For Kart Data Systems with a single temp input (3pin).

AiM MyChron6 Kart Racing Data Logger $659.00

AiM MyChron 6 Data Logger The MyChron6 kart data logger has advanced the competition of kart racing. Single temp, wider display, Bluetooth connectivity for heat rate monitor, a second AUX CAN connection, 6 Axis IMU for measuring steering wheel angle and Wi-Fi or USB connection to the PC, all of these enhancements make it easier for the driver to analyze and improve their driving. The upgraded screen with multiple background color options has Bluetooth connectivity and 20 hours of non-stop working internal rechargeable Lithium battery. The sixth generation MyChron had the integration of increasingly advanced technologies, such as high-precision GPS. The MyChon6 also uses the USB-C charging port for running an external 16GB mass storage memory module for easy quick removal. Wider Display 6 Axis IMU (inertial measurement unit) for measuring steering wheel angle / input 1 Temperature Sensor (EGT, CHT or H2o) Second CAN, user configurable USB-C connector for dedicated mass storage, battery charger and PC communication Wi-Fi or USB connection to the PC 6 axis IMU also for measuring steering wheel position 20 hours of non-stop working (internal rechargeable Lithium) Compatible with heart rate monitors via Bluetooth 25 Hz GPS 1 Digital output, programmable high/low activation Compatible with IR eye when using trackside beacon (8pin to 4pin patch cable will be required) Compatible with: MyChron Expansion IR Temperature Controller SmartyCam3 Series of Camera's Lambda LCU-One and LCU1S) Bluetooth connectivity:Seamless connectivity with the advanced Bluetooth module in the MyChron6. If you want to measure your heart rate while racing, it can now be done. Simply connect your MyChron6 via Bluetooth to the heart rate monitor and look the data on-screen or download them after the race. Compatible with the most common heart rate monitor on the market. 3D accelerations and gyroThe 6-axis 50 Hz Inertial Measurement Unit (IMU) measures acceleration in the forward-backward, up-down and right-left directions and the angular velocity in thekart's pitch, roll and yaw directions, then calculates and relays that information in real-time to MyChron6. MyChron6 features an internal, high precision, 25 Hz four navigation satellite systems (GPS, GLONASS, BeiDou, Galileo) receiver and an internal database including information about the track: just switched ON, it automatically recognizes the track and gets the information about the Starting Line Position and the Time Zone. The precision of the calculated Lap Times is 1/100 of second.

AiM MyChron6 2T Kart Data System at Product41 Race Car

AiM MyChron6-2T Kart Racing Data Logger $759.00

AiM MyChron 6-2T Data Logger Kart Dash The MyChron6 2-T kart data logger has advanced the competition of kart racing. With wider display, Bluetooth connectivity for heat rate monitor, second AUX CAN connection, 6 Axis IMU for steering wheel angle and Wi-Fi or USB connection to the PC, all of these enhancements make it easier for the driver to analyze and improve their driving quickly at the track. Upgraded screen with multiple background color options, Bluetooth connectivity and 20 hours of non-stop working internal rechargeable Lithium battery. The sixth generation MyChron had the integration of increasingly advanced technologies, such as high-precision GPS. The MyChon6 also uses the USB-C charging port for running an external 16GB mass storage memory module for easy quick removal. Wider Display 6 Axis IMU (inertial measurement unit) for measuring steering wheel angle / input 2 Temperatures (EGT, CHT, H2o) any combination of 2 of the 3 listed Second CAN, user configurable USB-C connector for mass storage, battery charger and PC communication Wi-Fi or USB connection to the PC 6 axis IMU also for measuring steering wheel position 20 hours of non-stop working (internal rechargeable Lithium) Compatible with heart rate monitors via Bluetooth 25 Hz GPS 1 Digital output, programmable high/low activation Compatible with IR eye when using trackside beacon (8pin to 4pin patch cable will be required) Compatible with: MyChron Expansion IR Temperature Controller SmartyCam3 Series of Camera's Lambda LCU-One and LCU1S) Bluetooth connectivitySeamless connectivity with the advanced Bluetooth module in the MyChron6. If you want to measure your heart rate while racing, it can now be done. Simply connect your MyChron6 via Bluetooth to the heart rate monitor and look the data on-screen or download them after the race. Compatible with the most common heart rate monitor on the market. 3D accelerations and gyroThe 6-axis 50 Hz Inertial Measurement Unit (IMU) measures acceleration in the forward-backward, up-down and right-left directions and the angular velocity in thekart's pitch, roll and yaw directions, then calculates and relays that information in real-time to MyChron6. MyChron6 features an internal, high precision, 25 Hz four navigation satellite systems (GPS, GLONASS, BeiDou, Galileo) receiver and an internal database including information about the track: just switched ON, it automatically recognizes the track and gets the information about the Starting Line Position and the Time Zone. The precision of the calculated Lap Times is 1/100 of second.

AiM SmartyCam 3 Corsa - 67 FOV $1,599.00

SmartyCam3 Corsa Video Motorsports Camera - 67 degree FOV SmartyCam3 Corsa is the new version of SmartyCam HD, one of the most appreciated and well known racing product in the motorsport world. All the features that racers all around the world love about SmartyCam HD are way better in SmartyCam3 Corsa . The Global Shutter is now even more performing, the quality of video is full hd and up to 60 fps, the exclusive overlayed data are more accurate than ever. With the new Smart Sync feature RS3 Analysis 3, detects and aligns data from the file you’ve downloaded from any AiM device in just a click. Simple, powerful, better than ever. Fully Configurable Visual Overlays The new SmartyCam3 Corsa camera has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED. SmartyCam3 Corsa camera overlays all the data from both GPS and AiM loggers connected to your ECU. SmartyCam3 CONFIGURATIONWith Race Studio 3 software you can configure your overlays in a virtually infinite variety of ways: add your logo and the track map and choose your graphic objects from a list of pre-determined sets with same layout or even single objects from different sets. Your videos will be truly "yours" in all details, from the data to their graphic layout. The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap: so that you can simultaneously watch two of them and check where you were faster or slower.The same operation can be performed with a SmartyCam3 Sport video recorded on the same track: you will be able to compare your best lap with your friends personal best! Global shutter CMOS sensor 1920x1080 FHD 60 fps H.264 Display resolution 128x125 pixel Lens angle: 67 FOV Low Distortion Lens Internal, rechargeable lithium battery 9-15 volt external power Support for up to 2TB SD card Three-axial +/- 16G accelerometer -10C degree / +50C working temperature range Auto power ON/OFF Auto Start/Stop recording USB Type-C connector Ethernet 1 Gigabit CAN ECU Weight: 280 grams, battery included Waterproof: IP65 High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. You can choose among three video file quality levels: one-hour recording takes 4 GB (high quality), 2 GB (normal) or 1,5 GB (low). No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately.

AiM SmartyCam 3 Corsa - 84 FOV $1,599.00

SmartyCam3 Corsa Camera - 84 degree FOV SmartyCam3 Corsa is the new version of SmartyCam HD, one of the most appreciated and well known racing product in the motorsport world. All the great features that racers all around the world love about SmartyCam HD are way better in SmartyCam3. The Global Shutter is now even more performing, the quality of video is full hd and up to 60 fps, the exclusive overlayed data are more accurate than ever. With the new Smart Sync feature RS3 Analysis 3, detects and aligns data from the file you’ve downloaded from any AiM device in just a click. Simple, powerful, better than ever. Fully Configurable Overlays The new SmartyCam3 Corsa camera has been designed for motorsport with a single purpose: Providing great videos including all the information you need. SmartyCam3 Corsa camera overlays all the data from both GPS and AiM loggers connected to your ECU. SmartyCam3 CONFIGURATIONWith Race Studio 3 software you can configure your overlays in a virtually infinite variety of ways: add your logo and the track map and choose your graphic objects from a list of pre-determined sets with same layout or even single objects from different sets. Your videos will be truly "yours" in all details, from the data to their graphic layout. The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap: so that you can simultaneously watch two of them and check where you were faster or slower.The same operation can be performed with a SmartyCam3 Sport video recorded on the same track: you will be able to compare your best lap with your friends personal best! Global shutter CMOS sensor 1920x1080 FHD 60 fps H.264 Display resolution 128x125 pixel Lens angle: 84 FOV Low Distortion Lens Internal, rechargeable lithium battery 9-15 volt external power Support for up to 2TB SD card Three-axial +/- 16G accelerometer -10C degree / +50C working temperature range Auto power ON/OFF Auto Start/Stop recording USB Type-C connector Ethernet 1 Gigabit CAN ECU Weight: 280 grams, battery included Waterproof: IP65 High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. You can choose among three video file quality levels: one-hour recording takes 4 GB (high quality), 2 GB (normal) or 1,5 GB (low). No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately.

AiM SmartyCam 3 Dual - 120 FOV $3,449.00

AiM SmartyCam3 Dual two camera system kit includes the following: (2) compact 120 degree "bullet" cameras (2) 2m cables for connecting cameras Base recording unit Standard and Ethernet wiring harness (5pin CAN/Exp, 9-15v power in, ground, ECU CAN +, ECU CAN - and ethernet) 16G SD card NOTE: Unit requires an external power source. SmartyCam3 Dual User Manual Options to consider when ordering: 712 5-pin male to 712 5-pin male CAN cable for connection to data logger 4-port data hub (required if current expansion port on data logger is being used) Bullet camera bracket (per camera) Ideal for mounting the bullet camera. Aluminum bracket with 1/4-20 female on bottom. RAM V-Bracket Mount with 1" ball to1/4-20 stud (per camera). This would attach to the bullet camera bracket for easy roll bar mounting. GPS09 Module - If you are not connecting to a data logger with internal GPS and using as a stand-alone camera system. Choose option and cable length. SmartyCam3 Dual - Dual Video IF ONE IS GREAT, DUAL IS BETTERSmartyCam3 Dual is the flagship version of SmartyCam3 range, designed for any racer who wants to get the most out from any performance video on the track.Dual Full HD camera system, Video output, CAN connection, USB-C connection, Ethernet port are only few of the features of SmartyCam3 Dual: the most powerful of our range. High quality with small size video filesGeneric HD cameras are focused on the highest pixels number. The result is that their video files are far too large, taking too much memory; for this reason SmartyCam3 videos have the same quality as other Full HD cameras but their files are smaller thanks to the H.264 compression system parameters that is optimized to perfectly balance video quality and file size. No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full Internal DataloggerThanks to its second CAN SmartyCam3 Dual receives and stores in a .mp4 file all data coming from any CAN expansion. At the end of your test, your SD Card contains all the information you need for a deep data analysis. SD card is sold separately. Video OutputIf you need to stream your video in real time an SDI output is available on SmartyCam3 GP and SmartyCam3 DUAL. Configurable OverlaysThe new SmartyCam3 Dual has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEEDSmartyCam3 Dual overlays all data from both GPS and AiM loggers connected to your ECU. Video Analysis with Race Studio 3The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap so that you can simultaneously watch two of them and check where you were faster or slower.The same operation can be performed with a SmartyCam3 Dual video recorded on the same track: you will be able to compare your best lap with your friends personal best! Technical Specifications: Video format: H.264 1,920x1,080 pixels @ 60 fps Display resolution: 2.4" 240 x 320 pixels Lens: Low distortion camera lens CMOS Sensor: Global shutter Field of view: 120° FOV Internal battery: Rechargeable lithium battery Video Out: 3G-SDI External power: 9-15 V Supported MicroSD Card (not included): Up to 2TB Usage temperatures: -10°C/+50°C Auto Power ON: Yes Auto Power OFF: Yes Auto Start/Stop Recording: Yes Body: Anodized Aluminum Dimensions: Main unit 154.4 x 109.6 x 42 mm Dimensions: Bullet camera 24 diam x 48.2 mm Connectors: 1 Deutsch 22 pin + 1 SMA SDI Video out + 2 SMA bullet connection + 1 USB-C Bullet cable length: From 500 mm to 4,000 mm (7 lengths available) Weight: Main unit 800 g | Bullet 45 g Waterproof: IP65

AiM SmartyCam 3 Dual - 67 FOV $3,449.00

AiM SmartyCam3 Dual two camera system includes the following: (2) compact 67 degree "bullet" cameras (2) 2m cables for connecting cameras Base recording unit Standard and Ethernet wiring harness (5pin CAN/Exp, 9-15v power in, ground, ECU CAN +, ECU CAN - and ethernet) 16G SD card NOTE: Unit requires an external power source. SmartyCam3 Dual User Manual Options to consider when ordering: 712 5-pin male to 712 5-pin male CAN cable for connection to data logger 4-port data hub (required if current expansion port on data logger is being used) Bullet camera bracket (per camera) Ideal for mounting the bullet camera. Aluminum bracket with 1/4-20 female on bottom. RAM V-Bracket Mount with 1" ball to1/4-20 stud (per camera). This would attach to the bullet camera bracket for easy roll bar mounting. GPS09 Module - If you are not connecting to a data logger with internal GPS and using as a stand-alone camera system. Choose option and cable length. SmartyCam3 Dual - Dual Video IF ONE IS GREAT, DUAL IS BETTERSmartyCam3 Dual is the flagship version of SmartyCam3 range, designed for any racer who wants to get the most out from any performance video on the track.Dual Full HD camera system, Video output, CAN connection, USB-C connection, Ethernet port are only few of the features of SmartyCam3 Dual: the most powerful of our range. High quality with small size video filesGeneric HD cameras are focused on the highest pixels number. The result is that their video files are far too large, taking too much memory; for this reason SmartyCam3 videos have the same quality as other Full HD cameras but their files are smaller thanks to the H.264 compression system parameters that is optimized to perfectly balance video quality and file size. No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full Internal DataloggerThanks to its second CAN SmartyCam3 Dual receives and stores in a .mp4 file all data coming from any CAN expansion. At the end of your test, your SD Card contains all the information you need for a deep data analysis. SD card is sold separately. Video OutputIf you need to stream your video in real time an SDI output is available on SmartyCam3 GP and SmartyCam3 DUAL. Configurable OverlaysThe new SmartyCam3 Dual has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEEDSmartyCam3 Dual overlays all data from both GPS and AiM loggers connected to your ECU. Video Analysis with Race Studio 3The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap so that you can simultaneously watch two of them and check where you were faster or slower.The same operation can be performed with a SmartyCam3 Dual video recorded on the same track: you will be able to compare your best lap with your friends personal best! Technical Specifications: Video format: H.264 1,920x1,080 pixels @ 60 fps Display resolution: 2.4" 240 x 320 pixels Lens: Low distortion camera lens CMOS Sensor: Global shutter Field of view: 67°, 84° or 120° Internal battery: Rechargeable lithium battery Video Out: 3G-SDI External power: 9-15 V Supported MicroSD Card (not included): Up to 2TB Usage temperatures: -10°C/+50°C Auto Power ON: Yes Auto Power OFF: Yes Auto Start/Stop Recording: Yes Body: Anodized Aluminum Dimensions: Main unit 154.4 x 109.6 x 42 mm Dimensions: Bullet camera 24 diam x 48.2 mm Connectors: 1 Deutsch 22 pin + 1 SMA SDI Video out + 2 SMA bullet connection + 1 USB-C Bullet cable length: From 500 mm to 4,000 mm (7 lengths available) Weight: Main unit 800 g | Bullet 45 g Waterproof: IP65

AiM SmartyCam 3 Dual - 84 FOV $3,449.00

AiM SmartyCam3 Dual two camera system includes the following: (2) compact 84 degree "bullet" cameras (2) 2m cables for connecting cameras Base recording unit Standard and Ethernet wiring harness (5pin CAN/Exp, 9-15v power in, ground, ECU CAN +, ECU CAN - and ethernet) 16G SD card NOTE: Unit requires an external power source. SmartyCam3 Dual User Manual Options to consider when ordering: 712 5-pin male to 712 5-pin male CAN cable for connection to data logger 4-port data hub (required if current expansion port on data logger is being used) Bullet camera bracket (per camera) Ideal for mounting the bullet camera. Aluminum bracket with 1/4-20 female on bottom. RAM V-Bracket Mount with 1" ball to1/4-20 stud (per camera). This would attach to the bullet camera bracket for easy roll bar mounting. GPS09 Module - If you are not connecting to a data logger with internal GPS and using as a stand-alone camera system. Choose option and cable length. SmartyCam3 Dual - Dual Video IF ONE IS GREAT, DUAL IS BETTERSmartyCam3 Dual is the flagship version of SmartyCam3 range, designed for any racer who wants to get the most out from any performance video on the track.Dual Full HD camera system, Video output, CAN connection, USB-C connection, Ethernet port are only few of the features of SmartyCam3 Dual: the most powerful of our range. High quality with small size video filesGeneric HD cameras are focused on the highest pixels number. The result is that their video files are far too large, taking too much memory; for this reason SmartyCam3 videos have the same quality as other Full HD cameras but their files are smaller thanks to the H.264 compression system parameters that is optimized to perfectly balance video quality and file size. No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full Internal DataloggerThanks to its second CAN SmartyCam3 Dual receives and stores in a .mp4 file all data coming from any CAN expansion. At the end of your test, your SD Card contains all the information you need for a deep data analysis. SD card is sold separately. Video OutputIf you need to stream your video in real time an SDI output is available on SmartyCam3 GP and SmartyCam3 DUAL. Configurable OverlaysThe new SmartyCam3 Dual has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEEDSmartyCam3 Dual overlays all data from both GPS and AiM loggers connected to your ECU. Video Analysis with Race Studio 3The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap so that you can simultaneously watch two of them and check where you were faster or slower.The same operation can be performed with a SmartyCam3 Dual video recorded on the same track: you will be able to compare your best lap with your friends personal best! Technical Specifications: Video format: H.264 1,920x1,080 pixels @ 60 fps Display resolution: 2.4" 240 x 320 pixels Lens: Low distortion camera lens CMOS Sensor: Global shutter Field of view: 67°, 84° or 120° Internal battery: Rechargeable lithium battery Video Out: 3G-SDI External power: 9-15 V Supported MicroSD Card (not included): Up to 2TB Usage temperatures: -10°C/+50°C Auto Power ON: Yes Auto Power OFF: Yes Auto Start/Stop Recording: Yes Body: Anodized Aluminum Dimensions: Main unit 154.4 x 109.6 x 42 mm Dimensions: Bullet camera 24 diam x 48.2 mm Connectors: 1 Deutsch 22 pin + 1 SMA SDI Video out + 2 SMA bullet connection + 1 USB-C Bullet cable length: From 500 mm to 4,000 mm (7 lengths available) Weight: Main unit 800 g | Bullet 45 g Waterproof: IP65

AiM SmartyCam 3 GP - 120 FOV $2,199.00

SmartyCam3 GP Camera - 120 FOV SmartyCam3 GP is for who needs external video and has very little space for installation. The brand new AiM Bullet-Cam features an internal battery of 1,250 mAh, 3 axis ± 16 G accelerometer.SmartyCam3 GP is designed to be installed out from the vehicle, it is perfectly comfortable from – 10° to + 60° Celsius and the bullet is rated IP67 waterproof, to face the most extreme condition of racing. Featuring 2 Binder 712 female connectors plus 2 SMA female connectors, the new SmartyCam3 GP has now a Display Port Output. Transmit data with Display Port cables can achieve a higher bandwidth than other cables. With a higher bandwidth the cable transmits more signals at the same time. Just like its precursor, the new SmartyCam3 doesn’t need an ECU Bridge to acquire data from your vehicle because it can be directly connected to your vehicle’s ECU plug-in-play and be ready to record your on-board videos and to improve your performance by analyzing the data overlay! Kit comes with: SmartyCam3 GP - recording module SmartyCam3 GP - bullet camera USB download cable SD card 2m coax cable (recording module to bullet camera) 5pin-5pin CAN patch cable (select length above) Configurable overlays The new SmartyCam3 GP camera has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED. SmartyCam3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU. Specifications: Global shutter CMOS sensor 1920x1080 FHD 60 fps H.264 Display resolution 240x320 pixel Lens angle: 120 degree Internal, rechargeable lithium battery - 1250 mAh Internal 64GB SSD 9-15 volt external power Support for up to 2TB SD card Three-axial +/- 16G accelerometer -10C degree / +60C working temperature range Auto power ON/OFF Auto Start/Stop recording 2 712 binder female 2 SMA female connectors Video out Bullet camera cable length - 2m Display port output Ethernet 1 Gigabit CAN / RS232 ECU connection Waterproof IP65 (camera IP67) High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. You can choose among three video file quality levels: one-hour recording takes 4 GB (high quality), 2 GB (normal) or 1,5 GB (low). No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately. Video OutputIf you need to stream your video in real time an SDI output is available on SmartyCam3 GP and SmartyCam3 DUAL.

AiM SmartyCam 3 GP - 67 FOV $2,199.00

SmartyCam3 GP - 67 FOV SmartyCam3 GP is for who needs external video and has very little space for installation. The brand new AiM Bullet-Cam features an internal battery of 1,250 mAh, 3 axis ± 16 G accelerometer.SmartyCam3 GP is designed to be installed out from the vehicle, it is perfectly comfortable from – 10° to + 50° Celsius and the bullet is rated IP67 waterproof, to face the most extreme condition of racing. Featuring 2 Binder 712 female connectors plus 2 SMA female connectors, the new SmartyCam3 GP has now a Display Port Output. Transmit data with Display Port cables can achieve a higher bandwidth than other cables. With a higher bandwidth the cable transmits more signals at the same time. Just like its precursor, the new SmartyCam3 doesn’t need an ECU Bridge to acquire data from your vehicle because it can be directly connected to your vehicle’s ECU plug-in-play and be ready to record your on-board videos and to improve your performance by analyzing the data overlay! Kit comes with: SmartyCam3 GP - recording module SmartyCam3 GP - bullet camera USB download cable SD card 2m coax cable (recording module to bullet camera) 5pin-5pin CAN patch cable (select length above) Configurable overlays The new SmartyCam3 GP camera has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED. SmartyCam3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU. Specifications: Global shutter CMOS sensor 1920x1080 FHD 60 fps H.264 Display resolution 240x320 pixel Lens angle: 67 degree Internal, rechargeable lithium battery - 1250 mAh Internal 64GB SSD 9-15 volt external power Support for up to 2TB SD card Three-axial +/- 16G accelerometer -10C degree / +60C working temperature range Auto power ON/OFF Auto Start/Stop recording 2 712 binder female 2 SMA female connectors Video out Bullet camera cable length - 2m Display port output Ethernet 1 Gigabit CAN / RS232 ECU connection Waterproof IP65 (camera IP67) High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. You can choose among three video file quality levels: one-hour recording takes 4 GB (high quality), 2 GB (normal) or 1,5 GB (low). No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately. Video OutputIf you need to stream your video in real time an SDI output is available on SmartyCam3 GP and SmartyCam3 DUAL.

AiM SmartyCam 3 GP - 84 FOV $2,199.00

SmartyCam3 GP Camera System- 84 FOV SmartyCam3 GP is for who needs external video and has very little space for installation. The brand new AiM Bullet-Cam features an internal battery of 1,250 mAh, 3 axis ± 16 G accelerometer.SmartyCam3 GP is designed to be installed out from the vehicle, it is perfectly comfortable from – 10° to + 60° Celsius and the bullet is rated IP67 waterproof, to face the most extreme condition of racing. Featuring 2 Binder 712 female connectors plus 2 SMA female connectors, the new SmartyCam3 GP has now a Display Port Output. Transmit data with Display Port cables can achieve a higher bandwidth than other cables. With a higher bandwidth the cable transmits more signals at the same time. Just like its precursor, the new SmartyCam3 doesn’t need an ECU Bridge to acquire data from your vehicle because it can be directly connected to your vehicle’s ECU plug-in-play and be ready to record your on-board videos and to improve your performance by analyzing the data overlay! Kit comes with: SmartyCam3 GP - recording module SmartyCam3 GP - bullet camera USB download cable SD card 2m coax cable (recording module to bullet camera) 5pin-5pin CAN patch cable (select length above) Configurable overlays The new SmartyCam3 GP camera has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED. SmartyCam3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU. Specifications: Global shutter CMOS sensor 1920x1080 FHD 60 fps H.264 Display resolution 240x320 pixel Lens angle: 84 degree Internal, rechargeable lithium battery - 1250 mAh Internal 64GB SSD 9-15 volt external power Support for up to 2TB SD card Three-axial +/- 16G accelerometer -10C degree / +60C working temperature range Auto power ON/OFF Auto Start/Stop recording 2 712 binder female 2 SMA female connectors Video out Bullet camera cable length - 2m Display port output Ethernet 1 Gigabit CAN / RS232 ECU connection Waterproof IP65 (camera IP67) High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. You can choose among three video file quality levels: one-hour recording takes 4 GB (high quality), 2 GB (normal) or 1,5 GB (low). No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately. Video OutputIf you need to stream your video in real time an SDI output is available on SmartyCam3 GP and SmartyCam3 DUAL.

Sold out

AiM SmartyCam 3 Sport - 67 FOV $999.00

SmartyCam3 Sport Camera - 67 degree FOV (narrow angle) Pick up your SmartyCam3 SPORT and put it whatever you want: its compact design is perfectly shaped to take up as little space as possible into your racing cockpit. The new quarter turn locking system assures the best performance in terms of safety and closing speed. The new SmartyCam3 SPORT camera has been designed for motorsports with a single purpose, Providing great videos including all the information you need. The SmartyCam3 SPORT camera overlays all the data from both GPS and AiM data loggers connected to your ECU. The perfect camera designed for club racing or karting.Note: Must be connected to a data logger with 12v power or 2 port data hub with external 12v power supply. To use as a stand alone camera you will need the 12v powered data hub and optional GPS09 module. Global shutter CMOS sensor 1920x1080 FHD 30 fps H.264 Display resolution 128x125 pixel Lens angle: 67 degree Internal, rechargeable lithium battery 350mAh 9-15 volt external power Support for up to 2TB micro SD card -10C degree / +60C working temperature range Auto power ON/OFF Auto Start/Stop recording CAN connection to all AiM systems RaceStudio3 (RS3) Configuration In the Box: SmartyCam3 SPORT - 67 FOV 110v wall charger 16G Micro SD Card & Adapter CAN Cable, 712 5pin-male to 712 5pin-male *Mount and powered 2 port data hub optional. High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 SPORT videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 SPORT cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately. With RaceStudio3 software you can configure your overlays in a virtually infinite variety of ways: add your logo and the track map and choose your graphic objects from a list of pre-determined sets with same layout or even single objects from different sets. Your videos will be truly "yours" in all details, from the data to their graphic layout.

AiM SmartyCam 3 Sport - 84 FOV $999.00

SmartyCam3 Sport 84 degree FOV (wide angle) Camera The SmartyCam3 SPORT, its compact design is perfectly shaped to take up as little space as possible into your racing cockpit or on your kart. The new quarter turn locking system assures the best performance in terms of safety and closing speed. The new SmartyCam3 SPORT camera has been designed for motorsports with a single purpose, Providing great videos including all the information you need. The SmartyCam3 SPORT camera overlays all the data from both GPS and AiM data loggers connected to your ECU. The perfect camera designed for club racing or karting.Note: Must be connected to a data logger with 12v power or2 port data hub with external 12v power supply. To use as a stand alone camera you will need the 12v powered data hub and optional GPS09 module. Global shutter CMOS sensor 1920x1080 FHD 30 fps H.264 Display resolution 128x125 pixel Lens angle: 84 degree Internal, rechargeable lithium battery 350mAh 9-15 volt external power Support for up to 2TB micro SD card -10C degree / +60C working temperature range Auto power ON/OFF Auto Start/Stop recording CAN connection to all AiM systems RaceStudio3 (RS3) Configuration In the Box: SmartyCam3 SPORT 110v wall charger 16G Micro SD Card & Adapter CAN Cable, 712 5pin-male to 712 5pin-male *Mount and powered 2 port data hub optional. High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 SPORT videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 SPORT cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately. With RaceStudio3 software you can configure your overlays in a virtually infinite variety of ways: add your logo and the track map and choose your graphic objects from a list of pre-determined sets with same layout or even single objects from different sets. Your videos will be truly "yours" in all details, from the data to their graphic layout.

AiM Solo 2 DL - RPM Harness $58.00

AiM Solo2 DL - RPM / Power Harness Connects the Solo 2 DL to older vehicles without an ECU. Provides data logging of RPM and powers the unit. Coil RPM connection via square wave (5-50 V signal) or pulse signals (150-450 V ignition coil trigger - primary circuit) Approximate length - 2m RPM only

AiM Solo2 DL GPS Lap Timer with direct ECU connection

AiM Solo 2 DL GPS Lap Timer - CAN $899.00

AiM Solo2 DL GPS Lap Timer/Data Logger with CAN Flying Leads connection to ECU Smarter, smaller and more powerful than ever: the brand new Solo 2 DL with ECU connection via RS232/CAN unterminated cable. Click here for Stock ECU List | Click here for Racing ECU List Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles.New Firmware - Now the Solo 2 DL can do the following: (new units and current units can be upgraded with the latest firmware update to be compatible) Channel ExpansionChannel Expansion for getting four analog channels, such as potentiometers, pressure sensors or thermoresistences. AiM ACC2 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. SmartyCam3 ConnectionsGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam3 cameras, that will show them in overlay in a 60-fps video. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5 Click here for Stock ECU List | Click here for Racing ECU List

AiM Solo2 DL OBDII ECU Connection Harness

AiM Solo 2 DL GPS Lap Timer - OBDII $899.00

AiM Solo 2 DL GPS Lap Timer/Data Logger with OBDII Connection to ECU Smarter, smaller and more powerful than ever: the brand new Solo 2 DL with ECU connection option via OBDII port. Click here for Stock ECU List | Click here for Racing ECU List Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles.New Firmware - Now the Solo 2 DL can do the following: (new units and current units can be upgraded with the latest firmware update to be compatible) Channel ExpansionChannel Expansion for getting four analog channels, such as potentiometers, pressure sensors or thermoresistences. AiM ACC2 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. SmartyCam3 ConnectionsGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam3 cameras, that will show them in overlay in a 60-fps video. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5 Click here for Stock ECU List | Click here for Racing ECU List

AiM Solo 2 DL GPS Lap Timer - RPM $899.00

AiM Solo2 DL GPS Lap Timer/Data Logger with RPM Harness The Solo2 DL with direct power and RPM connection via the RPM harness. Perfect for vehicles without an ECU but still want all the benefits of RPM logging and expansion to either a SmartyCam, Lambda Controller or ACC2 / ACC3. Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles.New Firmware - Now the Solo 2 DL can do the following: (new units and current units can be upgraded with the latest firmware update to be compatible) Channel ExpansionChannel Expansion for getting four analog channels, such as potentiometers, pressure sensors or thermoresistences. AiM ACC2 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. SmartyCam3 ConnectionsGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam3 cameras, that will show them in overlay in a 60-fps video. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5 Click here for Stock ECU List | Click here for Racing ECU List

AiM Solo 2 GPS Lap Timer $499.00

AiM Solo 2 GPS Lap Timer Smarter, smaller and more powerful than ever: the new Solo 2 is the game-changer we were waiting for! Not just a lap-timer, the AiM Solo 2 is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time.Is that enough? Of course not. You should know that the SOLO 2 has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, SOLO 2 will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, SOLO 2 is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin Graphical 128x64 pixel display 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 98mmx73.7mmx30.2mm size, 240g weight with battery

AiM Solo2 12v Power Harness $48.00

AiM Solo2 / Solo2 DL 12v Cigarette Adapter Power Harness Connects to the Solo2 / Solo2 DL via the 712 5pin connecter binder then to 12v cigarette lighter adapter. This Solo2 vehicle power wire harness also works with the Solo2 DL. (Reminder - the Solo 2DL also powers off the ODBII port when connected to the vehicle. Approximate length - 2m

AiM Solo2 DL - Flying Leads Harness $58.00

AiM Solo2 DL - Flying Leads Harness (unterminated) Connects the Solo 2 DL via CAN, RS232 or K-line to 1000 + stock and Racing ECU's. Flying leads Solo 2 DL harness also powers the unit. Approximate length - 2m CAN/K-line, RS232

AiM Solo2 DL - OBDII Harness $58.00

AiM Solo2 DL OBDII Harness / Plug (OBD2) Connects the Solo2 DL via the OBDII connecter to the vehicle ECU. The Solo2 DL also powers off the ODBII port when connected to the vehicle. Approximate length - 1.2m CAN/K-line OBDII

Sold out

AiM String Pot Sensor $277.00

AiM String Potentiometer Sensor AiM string pot sensor for measuring distance between 2 points. This analog linear position sensor is ideal for throttle position and other areas where position and velocity want to be measured. 0-10" measurement (250mm) Precision potentiometer 3oz. weight 719 female connector

AiM TPS Pedal Position Sensor $155.00

AiM Throttle Position Sensor - TPS Sensor The accelerator/brake pedal position sensors represent a key support for kart drivers. They provide a precise indication of timing and intensity of braking / acceleration. Utilizing this data helps to understand if the driver has accelerated or braked at the right moment and with the correct strength. A very important fact to evaluate driver behavior and improve their performance.Data can be received by a MyChron5S or MyChron6 connected to MyChron Expansion and analyzed on your PC. Made in anodized aluminum, these sensors are very robust. They are water-resistant, too. Even calibration is immediate. Once installed, connect the sensors to MyChron Expansion and get pedal positions (in high position and zero position): after that the sensor will start getting acceleration/braking data. In the box: TPS Sensor Sensor magnet Mounting bracket & hardware 1.5m patch cable

Sold out

AiM Trackside IR Beacon $115.00

AiM Trackside IR Beacon Transmitter (optical) AiM Sports IR optical lap beacon transmitters are accurate, reliable, and affordable. These infrared beacons work with an optic receiver eye on your kart or car to display lap times on your data logger instantly. Position the transmitters at the start/finish line to record your overall lap times. They run in "low power" mode with AA batteries, or with the external wiring harness and a 12 V battery in "high power" (up to 60') for wider tracks. With the popularity of GPS over that last many years, these are most commonly used on older units that do not have a GPS module or not compatible with GPS. They are also very common in indoor racing situations where GPS is not received accurately. Catch all of your lap times with AiM optical lap transmitters. Note: Must use an AiM IR receiver eye on kart or car.

AiM Wall Charger - AC 110v $38.50

AiM 110v Wall Charger AiM MyChron5, MyChron6, SmartyCam3 and Solo2 110v wall charger. Will charge MyChron battery while the battery is still installed on the MyChron. 110v USA wall charger to 5-pin connector. Also compatible with other AiM products using the 5-pin port for charging.

Alpinestars Balaclava ZX EVO 2 $99.95

Alpinstars ZX Balaclava EVO 2 - FIA/SFI Certified Alpinestars ZX Series EVO Lines layers are constructed with Lenzing FR®; an innovative natural viscose fiber that affords exceptional flame resistance and protection against heat transfer. This Formula 1 specification balaclava is extremely lightweight and thin, while being incredibly soft to the touch for greatly enhanced comfort when wearing a driving suit, and has extensive mesh panels on the front central area and rear for optimum levels of breathability. Features include: Double-layered face area for extra protection Mouth opening for hydration tube access Fabric composition with a high percentage of Lenzing FR® fiber for enhanced garment performance Stretchable open knit construction on mouth and back zones for improved airflow and ventilation Lightweight, seamless construction for optimum comfort FIA 8856-2018 / SFI 3.3 homologation standards Black or white color options

Alpinestars Balaclava ZX EVO 2 - Flo-Yellow $99.95

Alpinestars ZX Balaclava EVO 2 - Flo-Yellow FIA/SFI Certified Fluorescent Yellow Alpinestars ZX Series EVO Lines layers are constructed with Lenzing FR®; an innovative natural viscose fiber that affords exceptional flame resistance and protection against heat transfer. This Formula 1 specification balaclava is extremely lightweight and thin, while being incredibly soft to the touch for greatly enhanced comfort when wearing a helmet, and has extensive mesh panels on the front central area and rear for optimum levels of breathability. Features include: Double-layered face area for extra protection Mouth opening for hydration tube access Fabric composition with a high percentage of Lenzing FR® fiber for enhanced garment performance Stretchable open knit construction on mouth and back zones for improved airflow and ventilation Lightweight, seamless construction for optimum comfort FIA 8856-2018 / SFI 3.3 homologation standards Flo-Yellow

Aluminum Radio Box for Handheld Radios - Universal Mounting

Aluminum Radio Box for Handheld Radios - Universal Mounting $45.00

Hand Held Portable Radio Mounting Box Protect your valuable portable radio while in your racecar. The design features aluminum construction and a removable padded interior to protect your radio.Supplied hardware provides instant mounting options to any roll bar. Multiple mounting holes provide 3 horizontal and 2 vertical mounting options. Dimensions: 3-3/4in W x 5-1/8in H x 2-5/8in D.

Arctic Cat ECU Harness $80.00

MX UTV Arctic Cat Wildcat ECU Harness This harness connects the AiM Sports MX UTV dash logger to the ECU of the Arctic Cat Wildcat UTV. This plugs into the diagnostic or ODBII port. Replacement Harness.

Arm Restraints - Adult $39.00

Pyrotect SFI Certified Adult Arm Restraints These are Professional Series Adult Arm Restraints and are Nomex covered HD foam with adjustable length nylon straps. Box stitched strapping may be attached to separate rings for individual use or to a common ring for “Y” attachment to lap belt. Secure at the forearm, and adjust length so arm/hand cannot extend outside of protective cage or roll bar/side brace safety zone in formula cars. SFI 3.3 certification Black, Red or Blue

Arm Restraints - Youth $29.00

Pyrotect SFI Certified Youth Arm Restraints These are Professional Series Youth Arm Restraints and are Nomex covered HD foam with adjustable length nylon straps. Box stitched strapping may be attached to separate rings for individual use or to a common ring for “Y” attachment to lap belt. Secure at the forearm, and adjust length so arm/hand cannot extend outside of protective cage or roll bar/side brace safety zone in formula cars. SFI 3.3 certification Black, Red or Blue

Balaclava SFI 3.3 $26.95 $28.95

ZAMP Racing SFI 3.3 Approved Balaclava SFI 3.3 approved balaclava head sock provide an additional safety layer under your race helmet. Made using lightweight, breathable materials, our balaclava is what we suggest racers wear under their helmets. Features include: Fire Retardant Acrylic/Cotton Blended 6.5oz/yd² Single Layer Construction Breathable Material Plush Feel Tailored Fit prevents bunching, provides great fit SFI 3.3 Approved Black in color

Ball Lock Pins (2pc.) $5.00

Quick-Release Ball Lock Pins (2 pcs) Machined from 100% stainless steel, these military-grade ball-lock pins secure the Quantum Cooler within the Cooling Base Plate. Designed to prevent unintentional release while simultaneously functioning as a quick release disconnect from base plate for fast swaps in the pits between sessions. If your Quantum Cooler will be used between multiple vehicles it's a good idea to have spare pins.

Sold out

Bell RS7 Pro Racing Helmet in Matte Black

Bell RS7 PRO Racing Helmet SA2025 - Matte Black

Bell RS7 PRO Racing Helmet SA2025 - Matte Black $999.95

Bell RS7 PRO Featuring a lightweight carbon fiberglass composite shell, the Bell RS7 uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance, and energy absorbing capabilities. With both SA2025 and FIA8859-2024 certification, the sleek modern design features an advanced ventilation system with 14 air-intake and extraction channels that can be used with or without air-intake (available separately). The RS7 double screen anti-fog (DSAF) visor and rubber gasket seal ensure air, water and dust will not enter in the eye port. Availability: Mid-November 2025 Lightweight Premium Carbon Fiberglass Composite shell - matte black Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Optical grade injected Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility Equipped with Bell Racing SmartLock Mechanism Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems Factory installed Hans anchors as original equipment Air Intake, side air extractors, rear spoiler, top and chin bar gurneys available separately Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Shield and pivot kit: SE07, SV(SE07) Certifications: SA2025 / FIA 8859-2024

Sold out

Bell RS-7 Pro Racing Helmet in Gloss White

Bell RS7 PRO Racing Helmet SA2025 - White

Bell RS7 PRO Racing Helmet SA2025 - White $999.95

Bell RS7 PRO Featuring a lightweight carbon fiberglass composite shell, the Bell RS7 uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance, and energy absorbing capabilities. With both SA2025 and FIA8859-2024 certification, the sleek modern design features an advanced ventilation system with 14 air-intake and extraction channels that can be used with or without air-intake (available separately). The RS7 double screen anti-fog (DSAF) visor and rubber gasket seal ensure air, water and dust will not enter in the eye port. Availability: Mid-November 2025 Lightweight Premium Carbon Fiberglass Composite shell Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Optical grade injected Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility Equipped with Bell Racing SmartLock Mechanism Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems Factory installed Hans anchors as original equipment Air Intake, side air extractors, rear spoiler, top and chin bar gurneys available separately Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Shield and pivot kit: SE07, SV(SE07) Certifications: SA2025 / FIA 8859-2024

Sold out

Bell XR7 Pro Racing Helmet in Matte Black

Bell XR7 PRO Racing Helmet SA2025 - Matte Black

Bell XR7 PRO Racing Helmet SA2025 - Matte Black $899.95

XR7 PRO - SA2025 Introducing the Bell XR-7 Pro Series in matte black, the next evolution of the trusted GP3. Crafted with a composite shell, the XR-7 balances lightweight construction with rugged impact performance. Inside, a multi-density liner system maximizes energy absorption and comfort lap after lap. The optical-grade DSAF shield eliminates fog even in wet or humid conditions, giving racers the clarity they need to focus forward.Availability: Mid-November 2025 Lightweight Premium Carbon Fiberglass Composite shell Advanced multi-density, multi-piece liner for optimal energy absorption and impact protection Optical-grade Double Screen Anti-Fog (DSAF) visor for high-performance visibility and reliable anti-fog control Versatile, direct flow ventilation system combining upper chin bar vents and lower chin bar air intake vents to maximize airflow with adjustable upper air intake vents for controlled airflow. Integrated face piece channels allow for easy installation of drinking tube and radio systems without affecting helmet fit or comfort Interior parts kit accessories available for configuration to ear cup version or cheek pad as required Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Factory-installed Hans anchors included as standard Shield and pivot kit: SE07 3MM, SV(SE07) Equipped with Bell Racing SmartLock Mechanism Certifications: SA2025

Sold out

Bell XR7 Pro Racing Helmet in Gloss White

Bell XR7 PRO Racing Helmet SA2025 - White

Bell XR7 PRO Racing Helmet SA2025 - White $899.95

Bell XR7 PRO - SA2025 Introducing the Bell XR-7 Pro Series in white, the next evolution of the trusted GP3. Crafted with a composite shell, the XR-7 balances lightweight construction with rugged impact performance. Inside, a multi-density liner system maximizes energy absorption and comfort lap after lap. The optical-grade DSAF shield eliminates fog even in wet or humid conditions, giving racers the clarity they need to focus forward. Availability: Mid-November 2025 Lightweight Premium Carbon Fiberglass Composite shell Advanced multi-density, multi-piece liner for optimal energy absorption and impact protection Optical-grade Double Screen Anti-Fog (DSAF) visor for high-performance visibility and reliable anti-fog control Versatile, direct flow ventilation system combining upper chin bar vents and lower chin bar air intake vents to maximize airflow with adjustable upper air intake vents for controlled airflow. Integrated face piece channels allow for easy installation of drinking tube and radio systems without affecting helmet fit or comfort Interior parts kit accessories available for configuration to ear cup version or cheek pad as required Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Factory-installed Hans anchors included as standard Shield and pivot kit: SE07 3MM, SV(SE07) Equipped with Bell Racing SmartLock Mechanism Certification: SA2025

Blower Push-On/Off Switch $28.00

Premium Push ON/OFF Blower Switch Turn your helmet forced air system on and off with LED push on/off button switch. For heavy duty use in dusty and wet environments. Comes ready to install with pre-labeled wire connection for quick easy installation to our premium helmet blower systems. 12v 10 amp rated 7/8" mounting hole (22mm) IP65 waterproof Blue LED illumination when on Pre-labeled wires for easy installation

Bluetooth Helmet Speakers $48.00

Garmin Catalyst Wireless Speaker System - Bluetooth Speaker Kit The Garmin Catalyst is a fantastic on track tool that gives audible feedback to the driver. Sometimes the problem is hearing it. This wireless Bluetooth in helmet speaker kit is the answer. It pairs perfectly with the Garmin Catalyst. This high sound quality speaker kit comes with detachable Velcro, pairs with many Bluetooth compatible products and is easy to install into the helmet or ear cups. Specifications: Bluetooth Version:V5.0+EDR. Frequency Response: 2.402Hz-2.480GHz. Bluetooth Distance: 20M. MIC Distance =1M. Lithium Battery: 3.7V/700mA. Charging Time: 2-3 hours. Standby Time: 500 hours. Working Time: 45-50 hours. Bluetooth Matching Name: Helmet Headphone. Cell phone compatible Package Includes: 1 x Helmet Headset (2 speakers) 1 x Headphone speaker VELCRO 1 x USB Charge Cable 1 x User Manual 2 x Dual loc Velcro Garmin Catalyst not included.

Boost / Vacuum MAP Sensor (Absolute) 50psi $165.00

Boost / Vacuum (Absolute Pressure) Sensor 50 psi 1/8 NPT This "absolute pressure" MAP (manifold absolute pressure) sensor is used for measuring vapor (gas) pressures, from intake boost to crankcase pressure. The 50 psi pressure range is based on perfect vacuum (i.e., from 15 psi below atmospheric pressure to 35 psi above). This sensor is marked "0-50psiA" to differentiate it from the standard 0-50 psi sensor (marked "0-50psiSG"), which does not measure vacuum. 1/8" NPT 719 female connector 19" in length Used with most all current and past AiM data loggers including: All MX-series (MXm, MXS, MXP, MXG, MXT) EVO4, EVO4S, EVO5 MXL series MyChon Expansion Solo 2 DL when paired with ACC or ACC2

Sold out

BPR40 Mag One - Replacement Battery $40.00

Motorola BPR-40 Mag One Replacement Battery Replacement 1200 mAh NiMH battery. Compatible with BPR-40 Mag one radio.

Breakaway Coupling $44.00

Break-away Coupling The break-away connectors are a unique latch assembly that consists of two independent mechanisms that secure together and breakaway at 9 lbs of pressure. Our break-away adapters are independent of the current shirt connectors so that they can be placed in a location on the tubing that is best to breakaway in an emergency situation. This latch design prevents unintentional release under standard operating conditions but allows for hands free release in an emergency. FEATURES: 9 lbs Release System INCLUDED: 1 x ¼” Hose Connector Male/Female (2 required per shirt)

Bully Front Sprocket #35 $28.00

#35 Bully Drive Gears. Front Sprocket. 12T-19T

Burris Tire - Slick SS-11 Compound from $70.00

Burris Racing Tire - Oval Slick. SS-11 Compound.

Burris Tire - Slick SS-22 Compound from $70.00

Burris Racing Tire - Oval Slick. SS-22 Compound.

CAK-40 Whip Antenna $99.00

Racing Radios CAK-40 External Racing Antenna Racing Radios premium CAK-40-BNC wave UHF whip race car radio antenna. The most standard antenna kit. Features: Wave UHF whip antenna 8' BNC - NMO cable with metal BNC connector for the most secure connection

CAK-65 Detachable Antenna $310.00

Racing Radios CAK-65 Detachable Race Car Antenna Racing Radios premium CAK-65 wave monopole race car radio antenna includes a flexible wire ground plane with a detachable radio antenna SMA connector. Easily installs with included hex locknuts. Available radio adapter connectors: BNC, Mini UHF and TNC Features: Detachable SMA Connector Radio Antenna Easy Installation BNC Connector (standard) Flexible Ground Wire Plane

CAK-Flex 8" No-Drill Antenna $160.00

Racing Radios CAK-Flex External Car Radio Antenna Racing Radios CAK-Flex, 8" BNC connector - Flexible external antenna. Fasten to the highest location on the car for best reception. No holes are required for installation. Notes: If using with Motorola CP200D handheld portable radio, the CP200D Antenna Adapter will be needed. (also shown below) If using with Motorola CM300D mobile radio, the Mobile Radio Antenna Adapter will be needed.

Find anything you need

Sign in to your account

Create an account

Item added to cart!