AiM MXT 1.3 Dash - Data Logger (10" Display) The MXT 1.3 has the largest display of the AiM auto data acquisition systems (10 inches). An evolution of the MXG that was designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS09c Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 10" display makes it perfect for wide cockpits installation. Typically ships within 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List In the box: MXT 10" Dash Logger 37pin harness GPS module USB cable WiFi ConnectivityConfigure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection. CAN OutputWith the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities. High contrast TFT displayA high contrast TFT display identifies MXT at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons. Flexible alarmsMXT features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors.Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Two digital outputsMXT 1.3 features two digital outputs. Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: GPS09 Module (included in the kit) Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Rev.2.1 Cameras and All SmartyCam3 Versions Included in the box: AiM MXT 1.3 Dash Logger 37-pin primary harness with bulkhead adapter 1.3m GPS 09 USB download cable Optional:Secondary Harness: 2 digital inputs, 4 analog inputs, 2nd CAN input Technical Specifications: (some specs will change with the MXT, shown are mostly MXG Specs) Display: 10” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: TBD Power consumption: 400 mA CAN connections: 3 Analog inputs: 8 fully configurable, max 500 Hz each Resolution: 800x480 pixels Contrast: TBD Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 Motorsport connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 4 Speed inputs, lap signal, coil RPM input Digital outputs: 2 (1 Amp max each) Second CAN: Yes (optional 22-pin harness needed) WiFi connection: Yes Internal memory: 4 GB Ambient light sensor: Yes Waterproof: IP65

SmartyCam3 Dual User Manual  The SmartyCam3 Dual kit includes the following: (2) compact 67 degree "bullet" cameras (2) 2m cables for connecting cameras Base recording unit Standard and Ethernet wiring harness (5pin CAN/Exp, 9-15v power in, ground, ECU CAN +, ECU CAN - and ethernet) 16G SD card NOTE: Unit requires an external power source. Options to consider when ordering: 712 5-pin male to 712 5-pin male CAN cable for connection to data logger 4-port data hub (required if current expansion port on data logger is being used) Bullet camera bracket (per camera) Ideal for mounting the bullet camera. Aluminum bracket with 1/4-20 female on bottom. RAM V-Bracket Mount with 1" ball to1/4-20 stud (per camera). This would attach to the bullet camera bracket for easy roll bar mounting. GPS09 Module - If you are not connecting to a data logger with internal GPS and using as a stand-alone camera system. Choose option and cable length. SmartyCam3 Dual - Dual Video IF ONE IS GREAT, DUAL IS BETTERSmartyCam3 Dual is the flagship version of SmartyCam3 range, designed for any racer who wants to get the most out from any performance video on the track.Dual Full HD camera system, Video output, CAN connection, USB-C connection, Ethernet port are only few of the features of SmartyCam3 Dual: the most powerful of our range. High quality with small size video filesGeneric HD cameras are focused on the highest pixels number. The result is that their video files are far too large, taking too much memory; for this reason SmartyCam3 videos have the same quality as other Full HD cameras but their files are smaller thanks to the H.264 compression system parameters that is optimized to perfectly balance video quality and file size. No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full Internal DataloggerThanks to its second CAN SmartyCam3 Dual receives and stores in a .mp4 file all data coming from any CAN expansion. At the end of your test, your SD Card contains all the information you need for a deep data analysis. SD card is sold separately. Video OutputIf you need to stream your video in real time an SDI output is available on SmartyCam3 GP and SmartyCam3 DUAL. Configurable OverlaysThe new SmartyCam3 Dual has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEEDSmartyCam3 Dual overlays all data from both GPS and AiM loggers connected to your ECU. Video Analysis with Race Studio 3The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap so that you can simultaneously watch two of them and check where you were faster or slower.The same operation can be performed with a SmartyCam3 Dual video recorded on the same track: you will be able to compare your best lap with your friends personal best! Technical Specifications: Video format: H.264 1,920x1,080 pixels @ 60 fps Display resolution: 2.4" 240 x 320 pixels Lens: Low distortion camera lens CMOS Sensor: Global shutter Field of view: 67°, 84° or 120° Internal battery: Rechargeable lithium battery Video Out: 3G-SDI External power: 9-15 V Supported MicroSD Card (not included): Up to 2TB Usage temperatures: -10°C/+50°C Auto Power ON: Yes Auto Power OFF: Yes Auto Start/Stop Recording: Yes Body: Anodized Aluminum Dimensions: Main unit 154.4 x 109.6 x 42 mm Dimensions: Bullet camera 24 diam x 48.2 mm Connectors: 1 Deutsch 22 pin + 1 SMA SDI Video out + 2 SMA bullet connection + 1 USB-C Bullet cable length: From 500 mm to 4,000 mm (7 lengths available) Weight: Main unit 800 g | Bullet 45 g Waterproof: IP65

SmartyCam3 Dual User Manual  The SmartyCam3 Dual kit includes the following: (2) compact 120 degree "bullet" cameras (2) 2m cables for connecting cameras Base recording unit Standard and Ethernet wiring harness (5pin CAN/Exp, 9-15v power in, ground, ECU CAN +, ECU CAN - and ethernet) 16G SD card NOTE: Unit requires an external power source. Options to consider when ordering: 712 5-pin male to 712 5-pin male CAN cable for connection to data logger 4-port data hub (required if current expansion port on data logger is being used) Bullet camera bracket (per camera) Ideal for mounting the bullet camera. Aluminum bracket with 1/4-20 female on bottom. RAM V-Bracket Mount with 1" ball to1/4-20 stud (per camera). This would attach to the bullet camera bracket for easy roll bar mounting. GPS09 Module - If you are not connecting to a data logger with internal GPS and using as a stand-alone camera system. Choose option and cable length. SmartyCam3 Dual - Dual Video IF ONE IS GREAT, DUAL IS BETTERSmartyCam3 Dual is the flagship version of SmartyCam3 range, designed for any racer who wants to get the most out from any performance video on the track.Dual Full HD camera system, Video output, CAN connection, USB-C connection, Ethernet port are only few of the features of SmartyCam3 Dual: the most powerful of our range. High quality with small size video filesGeneric HD cameras are focused on the highest pixels number. The result is that their video files are far too large, taking too much memory; for this reason SmartyCam3 videos have the same quality as other Full HD cameras but their files are smaller thanks to the H.264 compression system parameters that is optimized to perfectly balance video quality and file size. No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full Internal DataloggerThanks to its second CAN SmartyCam3 Dual receives and stores in a .mp4 file all data coming from any CAN expansion. At the end of your test, your SD Card contains all the information you need for a deep data analysis. SD card is sold separately. Video OutputIf you need to stream your video in real time an SDI output is available on SmartyCam3 GP and SmartyCam3 DUAL. Configurable OverlaysThe new SmartyCam3 Dual has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEEDSmartyCam3 Dual overlays all data from both GPS and AiM loggers connected to your ECU. Video Analysis with Race Studio 3The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap so that you can simultaneously watch two of them and check where you were faster or slower.The same operation can be performed with a SmartyCam3 Dual video recorded on the same track: you will be able to compare your best lap with your friends personal best! Technical Specifications: Video format: H.264 1,920x1,080 pixels @ 60 fps Display resolution: 2.4" 240 x 320 pixels Lens: Low distortion camera lens CMOS Sensor: Global shutter Field of view: 120° FOV Internal battery: Rechargeable lithium battery Video Out: 3G-SDI External power: 9-15 V Supported MicroSD Card (not included): Up to 2TB Usage temperatures: -10°C/+50°C Auto Power ON: Yes Auto Power OFF: Yes Auto Start/Stop Recording: Yes Body: Anodized Aluminum Dimensions: Main unit 154.4 x 109.6 x 42 mm Dimensions: Bullet camera 24 diam x 48.2 mm Connectors: 1 Deutsch 22 pin + 1 SMA SDI Video out + 2 SMA bullet connection + 1 USB-C Bullet cable length: From 500 mm to 4,000 mm (7 lengths available) Weight: Main unit 800 g | Bullet 45 g Waterproof: IP65

SmartyCam3 Dual User Manual  The SmartyCam3 Dual kit includes the following: (2) compact 84 degree "bullet" cameras (2) 2m cables for connecting cameras Base recording unit Standard and Ethernet wiring harness (5pin CAN/Exp, 9-15v power in, ground, ECU CAN +, ECU CAN - and ethernet) 16G SD card NOTE: Unit requires an external power source. Options to consider when ordering: 712 5-pin male to 712 5-pin male CAN cable for connection to data logger 4-port data hub (required if current expansion port on data logger is being used) Bullet camera bracket (per camera) Ideal for mounting the bullet camera. Aluminum bracket with 1/4-20 female on bottom. RAM V-Bracket Mount with 1" ball to1/4-20 stud (per camera). This would attach to the bullet camera bracket for easy roll bar mounting. GPS09 Module - If you are not connecting to a data logger with internal GPS and using as a stand-alone camera system. Choose option and cable length. SmartyCam3 Dual - Dual Video IF ONE IS GREAT, DUAL IS BETTERSmartyCam3 Dual is the flagship version of SmartyCam3 range, designed for any racer who wants to get the most out from any performance video on the track.Dual Full HD camera system, Video output, CAN connection, USB-C connection, Ethernet port are only few of the features of SmartyCam3 Dual: the most powerful of our range. High quality with small size video filesGeneric HD cameras are focused on the highest pixels number. The result is that their video files are far too large, taking too much memory; for this reason SmartyCam3 videos have the same quality as other Full HD cameras but their files are smaller thanks to the H.264 compression system parameters that is optimized to perfectly balance video quality and file size. No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full Internal DataloggerThanks to its second CAN SmartyCam3 Dual receives and stores in a .mp4 file all data coming from any CAN expansion. At the end of your test, your SD Card contains all the information you need for a deep data analysis. SD card is sold separately. Video OutputIf you need to stream your video in real time an SDI output is available on SmartyCam3 GP and SmartyCam3 DUAL. Configurable OverlaysThe new SmartyCam3 Dual has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEEDSmartyCam3 Dual overlays all data from both GPS and AiM loggers connected to your ECU. Video Analysis with Race Studio 3The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap so that you can simultaneously watch two of them and check where you were faster or slower.The same operation can be performed with a SmartyCam3 Dual video recorded on the same track: you will be able to compare your best lap with your friends personal best! Technical Specifications: Video format: H.264 1,920x1,080 pixels @ 60 fps Display resolution: 2.4" 240 x 320 pixels Lens: Low distortion camera lens CMOS Sensor: Global shutter Field of view: 67°, 84° or 120° Internal battery: Rechargeable lithium battery Video Out: 3G-SDI External power: 9-15 V Supported MicroSD Card (not included): Up to 2TB Usage temperatures: -10°C/+50°C Auto Power ON: Yes Auto Power OFF: Yes Auto Start/Stop Recording: Yes Body: Anodized Aluminum Dimensions: Main unit 154.4 x 109.6 x 42 mm Dimensions: Bullet camera 24 diam x 48.2 mm Connectors: 1 Deutsch 22 pin + 1 SMA SDI Video out + 2 SMA bullet connection + 1 USB-C Bullet cable length: From 500 mm to 4,000 mm (7 lengths available) Weight: Main unit 800 g | Bullet 45 g Waterproof: IP65

AiM MXG 1.3 Dash - Data Logger The MXG 1.3 has the largest display of the AiM auto data acquisition systems at 7". An evolution of the MXG that was designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS09c Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 7" display makes it perfect for wide cockpits installation. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List   WiFi ConnectivityConfigure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection. CAN OutputWith the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities. High contrast TFT displayA high contrast TFT display identifies MXG at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons. Flexible alarmsMXG features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors.Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Two digital outputsMXG 1.3 features two digital outputs. Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: GPS09 Module (included in the kit) Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Rev.2.1 Cameras and All SmartyCam 3 Versions Included in the box: AiM MXG 1.3 Dash Logger 37-pin primary harness with bulkhead adapter 1.3m GPS 09 USB download cable Optional:Secondary Harness: 2 digital inputs, 4 analog inputs, 2nd CAN input Technical Specifications: Display: 7” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 950 g Power consumption: 400 mA CAN connections: 3 Analog inputs: 8 fully configurable, max 1,000 Hz each Resolution: 800x480 pixels Contrast: 1000:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 Motorsport connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 4 Speed inputs, lap signal, coil RPM input Digital outputs: 2 (1 Amp max each) Second CAN: Yes (optional 22-pin harness needed) WiFi connection: Yes Internal memory: 4 GB Ambient light sensor: Yes Waterproof: IP65

AiM MXP 1.3, 6" Color TFT Dash Logger MXP data logger offers 50% more display area than the 5'' MXS display, in a similar dimension. The dash logger has an integrated shift array, configurable multicolor alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, GPS Module, inertial platform, analog and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections. Typically ships in 3-5 days Click here for Stock ECU List | Click here for Racing ECU List The MXP is also available in the Strada version for street use without data logging capabilities. The MXP Dash Logger has a wide range of data sources. MXP samples data coming from your ECU, the GPS Module, the 9 axis inertial platform (accelerometer, gyro and magnetometer), 8 fully configurable analog inputs, 6 digital inputs, predefined math channels and second CAN. Performance and data acquired can also be incremented adding up to eight expansion modules. Freely configurable pages. You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managedpushing one or two pushbuttons. High Contrast TFT Display A high contrast TFT display identifies MXP at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Flexible alarms & custom street icons MXP features five configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons. Two digital outputs MXP features two digital outputs. The two digital outputs (out) are LOW SIDE type (switch to ground): they can be configured in order to be turned on/off depending on the value of the analog or digital inputs. They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Camera inputs, also for rear mirror camera Two analog camera inputs are available, to swap your display into a mirror camera, through pushbutton command or event management.

AiM MXS 1.3 Dash 5" TFT Display - Data Logger The MXS 1.3 dash data logger for motorsports. MXS 1.3 is an evolution of the MXS and is used and designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS09c Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 5" display has been specifically designed for small cockpits installation. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List  WiFi ConnectivityConfigure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection.Note: Special order Item - Item usually ships within 3-4 days. Free 2 day shipping on this item CAN Output With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.High contrast TFT displayA high contrast TFT display identifies MXS at the first glance.An ambient light sensor keeps the backlight at optimum brightness levels.Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two push buttons. Flexible alarmsMXS features six configurable RGB alarm LEDs: you choose the conditions, you choose the colors.Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Two digital outputs MXS features two digital outputs.Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light array Choose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Camera Included in the box: AiM MXS 1.3 Dash Logger 37-pin primary harness with bulkhead adapter 1.3m GPS09 USB download cable Optional:Secondary Harness: 2 digital inputs, 4 analog inputs, 2nd CAN input Technical Specifications of the AiM MXS: Display: 5” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 530g Power consumption: 400 mA CAN connections: 3 Analog inputs: 6 fully configurable, max 1,000 Hz each Resolution: 800x480 pixels Contrast: 600:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 Motorsport connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 4 Speed inputs, lap signal, coil RPM input Digital outputs: 2 (1 Amp max each) Second CAN: Yes (optional 22-pin harness needed) WiFi connection: Yes Internal memory: 4 GB Ambient light sensor: Yes Waterproof: IP65

SmartyCam3 GP - 67 FOV SmartyCam3 GP is for who needs external video and has very little space for installation. The brand new AiM Bullet-Cam features an internal battery of 1,250 mAh, 3 axis ± 16 G accelerometer.SmartyCam3 GP is designed to be installed out from the vehicle, it is perfectly comfortable from – 10° to + 50° Celsius and the bullet is rated IP67 waterproof, to face the most extreme condition of racing. Featuring 2 Binder 712 female connectors plus 2 SMA female connectors, the new SmartyCam3 GP has now a Display Port Output. Transmit data with Display Port cables can achieve a higher bandwidth than other cables. With a higher bandwidth the cable transmits more signals at the same time. Just like its precursor, the new SmartyCam3 doesn’t need an ECU Bridge to acquire data from your vehicle because it can be directly connected to your vehicle’s ECU plug-in-play and be ready to record your on-board videos and to improve your performance by analyzing the data overlay! Kit comes with: SmartyCam3 GP - recording module SmartyCam3 GP - bullet camera USB download cable SD card 2m coax cable (recording module to bullet camera) 5pin-5pin CAN patch cable (select length above) Configurable overlays The new SmartyCam3 GP camera has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED. SmartyCam3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU. Specifications: Global shutter CMOS sensor 1920x1080 FHD 60 fps H.264 Display resolution 240x320 pixel Lens angle: 67 degree Internal, rechargeable lithium battery - 1250 mAh Internal 64GB SSD 9-15 volt external power Support for up to 2TB SD card Three-axial +/- 16G accelerometer -10C degree / +60C working temperature range Auto power ON/OFF Auto Start/Stop recording 2 712 binder female 2 SMA female connectors Video out Bullet camera cable length - 2m Display port output Ethernet 1 Gigabit CAN / RS232 ECU connection Waterproof IP65 (camera IP67) High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. You can choose among three video file quality levels: one-hour recording takes 4 GB (high quality), 2 GB (normal) or 1,5 GB (low). No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately. Video OutputIf you need to stream your video in real time an SDI output is available on SmartyCam3 GP and SmartyCam3 DUAL.

SmartyCam3 GP - 84 FOV SmartyCam3 GP is for who needs external video and has very little space for installation. The brand new AiM Bullet-Cam features an internal battery of 1,250 mAh, 3 axis ± 16 G accelerometer.SmartyCam3 GP is designed to be installed out from the vehicle, it is perfectly comfortable from – 10° to + 60° Celsius and the bullet is rated IP67 waterproof, to face the most extreme condition of racing. Featuring 2 Binder 712 female connectors plus 2 SMA female connectors, the new SmartyCam3 GP has now a Display Port Output. Transmit data with Display Port cables can achieve a higher bandwidth than other cables. With a higher bandwidth the cable transmits more signals at the same time. Just like its precursor, the new SmartyCam3 doesn’t need an ECU Bridge to acquire data from your vehicle because it can be directly connected to your vehicle’s ECU plug-in-play and be ready to record your on-board videos and to improve your performance by analyzing the data overlay! Kit comes with: SmartyCam3 GP - recording module SmartyCam3 GP - bullet camera USB download cable SD card 2m coax cable (recording module to bullet camera) 5pin-5pin CAN patch cable (select length above) Configurable overlays The new SmartyCam3 GP camera has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED. SmartyCam3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU. Specifications: Global shutter CMOS sensor 1920x1080 FHD 60 fps H.264 Display resolution 240x320 pixel Lens angle: 84 degree Internal, rechargeable lithium battery - 1250 mAh Internal 64GB SSD 9-15 volt external power Support for up to 2TB SD card Three-axial +/- 16G accelerometer -10C degree / +60C working temperature range Auto power ON/OFF Auto Start/Stop recording 2 712 binder female 2 SMA female connectors Video out Bullet camera cable length - 2m Display port output Ethernet 1 Gigabit CAN / RS232 ECU connection Waterproof IP65 (camera IP67) High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. You can choose among three video file quality levels: one-hour recording takes 4 GB (high quality), 2 GB (normal) or 1,5 GB (low). No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately. Video OutputIf you need to stream your video in real time an SDI output is available on SmartyCam3 GP and SmartyCam3 DUAL.

SmartyCam3 GP - 120 FOV SmartyCam3 GP is for who needs external video and has very little space for installation. The brand new AiM Bullet-Cam features an internal battery of 1,250 mAh, 3 axis ± 16 G accelerometer.SmartyCam3 GP is designed to be installed out from the vehicle, it is perfectly comfortable from – 10° to + 60° Celsius and the bullet is rated IP67 waterproof, to face the most extreme condition of racing. Featuring 2 Binder 712 female connectors plus 2 SMA female connectors, the new SmartyCam3 GP has now a Display Port Output. Transmit data with Display Port cables can achieve a higher bandwidth than other cables. With a higher bandwidth the cable transmits more signals at the same time. Just like its precursor, the new SmartyCam3 doesn’t need an ECU Bridge to acquire data from your vehicle because it can be directly connected to your vehicle’s ECU plug-in-play and be ready to record your on-board videos and to improve your performance by analyzing the data overlay! Kit comes with: SmartyCam3 GP - recording module SmartyCam3 GP - bullet camera USB download cable SD card 2m coax cable (recording module to bullet camera) 5pin-5pin CAN patch cable (select length above) Configurable overlays The new SmartyCam3 GP camera has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED. SmartyCam3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU. Specifications: Global shutter CMOS sensor 1920x1080 FHD 60 fps H.264 Display resolution 240x320 pixel Lens angle: 120 degree Internal, rechargeable lithium battery - 1250 mAh Internal 64GB SSD 9-15 volt external power Support for up to 2TB SD card Three-axial +/- 16G accelerometer -10C degree / +60C working temperature range Auto power ON/OFF Auto Start/Stop recording 2 712 binder female 2 SMA female connectors Video out Bullet camera cable length - 2m Display port output Ethernet 1 Gigabit CAN / RS232 ECU connection Waterproof IP65 (camera IP67) High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. You can choose among three video file quality levels: one-hour recording takes 4 GB (high quality), 2 GB (normal) or 1,5 GB (low). No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately. Video OutputIf you need to stream your video in real time an SDI output is available on SmartyCam3 GP and SmartyCam3 DUAL.

AiM MXG 1.2/1.3 Strada Wide size color TFT dash for road use, currently has the largest display of the AiM auto dash systems (7 inches). The "Strada" version is much the same as the MXG 1.3 dash logger but without the data logging capabilities. The "Stada Logger" option can be added at anytime to bring it to a full data logger. The MXG 1.2/1.3 comes in 2 versions, standard and street icon version. Both versions come with a standard 14pin harness for power and ECU connection. If no ECU is available, the optional 23pin harness will be required along with sensors and patch cables. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List High contrast TFT displayA high contrast TFT display identifies MXG at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons. Flexible alarms & custom street iconsMXG features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons. Digital outputsMXG 1.2/1.3 Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU.This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: GPS09 Module Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Rev.2.1 Cameras and All SmartyCam 3 Versions Included in the box: AiM MXG 1.2/1.3 Strada Dash 14-pin power/CAN harness USB download cable Optional: 23-pin harness (2 digital, 8 analog channels) Typical for non-ECU vehicles wanting external sensors like temps and pressures. GPS Module Technical Specifications: Display: 7” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 950 g Power consumption: 400 mA CAN connections: 2 Analog inputs: 8 fully configurable, max 500 Hz each Resolution: 800x480 pixels Contrast: 1000:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 AMP connectors + 1 Binder connector Alarm LEDs: 8 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 1 Speed inputs, 1 coil RPM input Digital outputs: 1 (1 Amp max) Second CAN: Yes (optional 23-pin harness needed) Ambient light sensor: Yes Waterproof: IP65

SmartyCam3 Corsa - 84 degree FOV SmartyCam3 Corsa is the new version of SmartyCam HD, one of the most appreciated and well known racing product in the motorsport world. All the great features that racers all around the world love about SmartyCam HD are way better in SmartyCam3. The Global Shutter is now even more performing, the quality of video is full hd and up to 60 fps, the exclusive overlayed data are more accurate than ever. With the new Smart Sync feature RS3 Analysis 3, detects and aligns data from the file you’ve downloaded from any AiM device in just a click. Simple, powerful, better than ever. Fully Configurable Overlays The new SmartyCam3 Corsa camera has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED. SmartyCam3 Corsa camera overlays all the data from both GPS and AiM loggers connected to your ECU. SmartyCam3 CONFIGURATIONWith Race Studio 3 software you can configure your overlays in a virtually infinite variety of ways: add your logo and the track map and choose your graphic objects from a list of pre-determined sets with same layout or even single objects from different sets. Your videos will be truly "yours" in all details, from the data to their graphic layout. The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap: so that you can simultaneously watch two of them and check where you were faster or slower.The same operation can be performed with a SmartyCam3 Sport video recorded on the same track: you will be able to compare your best lap with your friends personal best! Global shutter CMOS sensor 1920x1080 FHD 60 fps H.264 Display resolution 128x125 pixel Lens angle: 84 FOV Low Distortion Lens Internal, rechargeable lithium battery 9-15 volt external power Support for up to 2TB SD card Three-axial +/- 16G accelerometer -10C degree / +50C working temperature range Auto power ON/OFF Auto Start/Stop recording USB Type-C connector Ethernet 1 Gigabit CAN ECU Weight: 280 grams, battery included Waterproof: IP65 High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. You can choose among three video file quality levels: one-hour recording takes 4 GB (high quality), 2 GB (normal) or 1,5 GB (low). No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately.

SmartyCam3 Corsa - 67 degree FOV SmartyCam3 Corsa is the new version of SmartyCam HD, one of the most appreciated and well known racing product in the motorsport world. All the great features that racers all around the world love about SmartyCam HD are way better in SmartyCam . The Global Shutter is now even more performing, the quality of video is full hd and up to 60 fps, the exclusive overlayed data are more accurate than ever. With the new Smart Sync feature RS3 Analysis 3, detects and aligns data from the file you’ve downloaded from any AiM device in just a click. Simple, powerful, better than ever. Fully Configurable Overlays The new SmartyCam3 Corsa camera has been designed for motorsport with a single purpose: PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED. SmartyCam3 Corsa camera overlays all the data from both GPS and AiM loggers connected to your ECU. SmartyCam3 CONFIGURATIONWith Race Studio 3 software you can configure your overlays in a virtually infinite variety of ways: add your logo and the track map and choose your graphic objects from a list of pre-determined sets with same layout or even single objects from different sets. Your videos will be truly "yours" in all details, from the data to their graphic layout. The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap: so that you can simultaneously watch two of them and check where you were faster or slower.The same operation can be performed with a SmartyCam3 Sport video recorded on the same track: you will be able to compare your best lap with your friends personal best! Global shutter CMOS sensor 1920x1080 FHD 60 fps H.264 Display resolution 128x125 pixel Lens angle: 67 FOV Low Distortion Lens Internal, rechargeable lithium battery 9-15 volt external power Support for up to 2TB SD card Three-axial +/- 16G accelerometer -10C degree / +50C working temperature range Auto power ON/OFF Auto Start/Stop recording USB Type-C connector Ethernet 1 Gigabit CAN ECU Weight: 280 grams, battery included Waterproof: IP65 High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. You can choose among three video file quality levels: one-hour recording takes 4 GB (high quality), 2 GB (normal) or 1,5 GB (low). No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately.

AiM MXS 1.2/1.3 Strada The MXS 1.2/1.3 Strada, compact size color TFT dash for road use. The "Strada" version is much the same as the MXS 1.3 dash logger but without the data logging capabilities. The "Stada Logger" option can be added at anytime to bring it to a full data logger. The MXS 1.2/1.3 comes in 2 versions, standard and street icon version. Both versions come with a standard 14pin harness for power and ECU connection. If no ECU is available, the optional 23pin harness will be required along with sensors and patch cables. Typically ships in 3-5 days. Click here for Stock ECU List | Click here for Racing ECU List High contrast TFT displayA high contrast TFT display identifies MXS at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons. Flexible alarms & custom street iconsMXS Strada features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons. Digital outputsMXS 1.2/1.3 Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU.This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required. Expand the system, according to your needs: GPS09 Module Channel Expansion TC Hub LCU-One Lambda Controller SmartyCam HD Rev.2.1 Cameras and All SmartyCam 3 Versions Included in the box: AiM MXS 1.2/1.3 Strada Dash 14-pin power/CAN harness USB download cable Optional: 23-pin harness (2 digital, 8 analog channels) Typical for non-ECU vehicles wanting external sensors like temps and pressures. GPS Module Technical Specifications: Display: 5” TFT External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD Shift Lights: 10 configurable RGB LEDs Pushbuttons: Metallic Weight: 480 g Power consumption: 400 mA CAN connections: 2 Analog inputs: 8 fully configurable, max 500 Hz each Resolution: 800x480 pixels Contrast: 600:1 Brightness: 700cd/m2 - 1,100 Lumen Dimensions: 237x127.6x26 mm Waterproof: IP65 Connectors: 2 AMP connectors + 1 Binder connector Alarm LEDs: 6 configurable RGB LEDs Body: Anodized Aluminum ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs Digital inputs: 1 Speed inputs, 1 coil RPM input Digital outputs: 1 (1 Amp max) Second CAN: Yes (optional 23-pin harness needed) Ambient light sensor: Yes Waterproof: IP65

AiM MXm Compact Dash Logger The AiM MXm is the smallest full function dash logger which provides all the info needed by racers: it samples and shows key info like speed, lap times, RPM, gears, it has a 9 axis inertial platform, multiple math channels and much more. Its strengths are the compactness, just 5.5" x 3.5", which makes MXm perfect to be fit into any kind of car, bike or SXS UTV, and its plug-and-play usage - complete but simple. Typically ships in 3-5 days With full LCD backlit, customizable color display with 5 LED shift lights and 2 configurable RGB LED warning lights, the MXm is the perfect device for both Pro and Amateur racers. A wide range of data sources MXm samples data coming from your ECU, the internal GPS, the inertial platform (accelerometer, gyro and magnetometer) along with: 4 fully configurable analog inputs 3 digital inputs (2 speed inputs + 1 coil RPM input) and predefined math channels. The MXm can also be connected to many different stock or racing specific ECU's via CAN or K/Line. Click here for a complete list of ECU's Integrated shift lights and alarms MXm features a 5 LED shift light array. Choose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required.MXm also features two fully configurable RGB alarm LEDs: you can choose the conditions which turn them on/off, their color, select a solid alarm - or flashing one - and the flashing frequency. Two power outputs MXm features two power outputs that can drain up to 15 A each. The two power outputs can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens. The MXm can also be connected to a CAN data hub, LCU-One Lambda Controller and the SmartyCam series of cameras. Race Studio 3 Software Race Studio 3 is the true 'engine' of your MXm, as it will manage all your activities related to configuration. The AiM MXm offers secure downloadable data via Wi-Fi using the the Race Studio3 software.With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, math channels, display pages, digital outputs, alarms, shift lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras. MXm Specifications:  Display resolution: 268 x 128 pixels Backlight: 7 configurable RGB colors Ambient light sensor: Yes Shift lights: 5 configurable RGB LEDs Alarm LEDs: 2 configurable RGB LEDs CAN connections: 2 ECU connections: CAN, RS232 or K-Line ECU compatibility: +1,000 industry leading ECUs GPS: Integrated External modules: Lambda Controller and SmartyCam HD Analog inputs: 4 fully configurable, max 1,000 Hz each Digital inputs: 2 speed inputs, coil RPM input Digital outputs: 2 high-side Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer Wi-Fi connection: Yes Internal memory: 4 GB non-volatile Body: Glass fiber reinforced Nylon Pushbuttons: Metallic Connectors: 37 pins Motorsport connector + 4 pins power connector Dimensions: 137x88.4x31.9 mm Weight: 330 g Waterproof: IP65 In The Box: AiM MXm Compact Dash Logger 37 pins standard harness USB cable Race Studio 3 software

  Garmin Catalyst - Performance Driving Optimizer A "Must Have" for racers and track day drivers! Garmin Catalyst is an industry-first racing coach and driving performance optimizer that’s changing the world of motorsports. It mounts in the cockpit to gather your performance data and provide Real-time Audible Coaching including video with 140 degree FOV 1080p remote camera. Immediate session analysis helps drivers of all levels achieve their full track driving potential on road courses. Groundbreaking True Track Positioning™ technology uses built-in accelerometers, 10 Hz multi-GNSS positioning and image processing to automatically generate your car’s racing line on the track. Plus, our revolutionary True Optimal Lap™ technology shows your best achievable time, based on lines you actually drove and can repeat. While on the track, hear realtime coaching cues through a compatible headset (sold separately) or car stereo. After your session, use the touchscreen display to immediately review your performance data and see your major areas for improvement. Click here for the: Garmin Catalyst User Manual Click here for Video: Adding a Track to Garmin Catalyst Click here for Video: After Session Summary Page Click here for Video: Lap and Segment Review Click here for: USA Track Data Base (as of January 9th, 2023) Take advantage of your time on the track: TRUE TRACK POSITIONINGThis groundbreaking technology uses 10 Hz multi-GNSS positioning, image processing and built-in accelerometers to generate your racing line on the track. ON-TRACK DRIVING COACHOn the track, Garmin Catalyst quickly becomes your real-time “coach,” giving audio cues via BLUETOOTH® technology from your headset or car stereo. (sold separately). Can be paired with any BLUETOOTH® devise, use ear buds, in helmet speakers or adapt to your in helmet communication system. TRUE OPTIMAL LAP This revolutionary technology combines your best times for each track segment to show your optimum drivable time based on lines you actually drove and can repeat. APEX PERFORMANCEWhich line should you track when ripping around corners? See on the map how early or late apex decisions affect your overall speed through the course. REAL-TIME LAP DATAOn the course, Garmin Catalyst keeps track of your best lap time, adaptive delta time, number of laps and total session time. MOUNTS IN THE COCKPITSecure Garmin Catalyst inside the cockpit using the included heavy-duty suction cup or the included screw down mount. Take advantage of your time off the track: SEE AREAS OF GAINAfter your session, immediately review the performance data on your device to see where on the track your biggest areas for improvement are. AUTOMATIC INTERPRETATIONGarmin Catalyst crunches the numbers. So there’s no need to download data to your computer — and no cumbersome graphs with squiggly lines that leave you trying to analyze data for hours. ADAPTIVE COACHINGEasily compare performance data from your other sessions, and get immediate, adaptive suggestions to see areas where you can do better. TRACK DATABASEGarmin Catalyst comes preloaded with a track database featuring road courses from around the world. Garmin Catalyst allows users to easily add courses to the database as well. REMOTE CAMThe included remote cam captures clear, crisp HD video, which can be played back on the device with time-synced overlays showing speed, lap data and more. DATA ON DEMANDReview in-depth performance data on your 7” Garmin Catalyst device, or access a summary of your data on your mobile device or computer using the Garmin Connect™ app. What's in the Box: Garmin Catalyst™ 32 GB microSD™ pre-installed under covered compartment (auxiliary card slot on the side of the Catalyst device is externally accessible for memory expansion) Remote Cam with polarized lens cover Remote Cam 3.5 meter cable Heavy-duty vehicle suction cup Powered magnetic mount Two 1” connecting arms 1” arm connector Cable clips Vehicle power cable Documentation Included Optional Accessories: 1” ball adapter screw down mount USB data cable 12V bare wire vehicle power cable Additional Remote Cam adhesive Physical & Performance Physical dimensions: 7.84" W x 4.79" H x 0.93" D (19.9 x 12.2 x 2.4 cm)GPS: YesDisplay size: 6.0" W x 3.5" H (15.2 x 8.9 cm); 6.95" (17.7 cm)Water rating: NoDisplay resolution: 1024 x 600 pixelsWeight: 15.4 oz (437 g)Display type: 6.95" super wide view IPS, color TFT, with on-cell capacitive touch panelBattery type: rechargeable lithium-ionBattery life: up to 2 hours Features Stores history of all on-track performance: YesGLONASS: Yes3-D buildings and terrain: NoPowered magnetic mount: YesBuilt-in accelerometers: YesDriving performance scores: YesInterior night vision: No2 microphones; beam-forming technology: NoSupports multiple cars: YesClarity ™ HDR: NoDust rating: NoRequires cellular data connection: No3D Terrain: NoDual-orientation display: NoSegment analysis (racing line, speed and acceleration/deceleration): YesSupports multiple users: YesMagnetic Mount: YesWi-Fi® map and software updates: Yes (software and track database updates)Current weather plus 5 day forecast via Wi-Fi: YesCamera Resolution: 1080p (Remote Cam)BLUETOOTH® connectivity: Yes (works with BLUETOOTH®-enabled helmet/headset (sold separately))Frame Rate: up to 30 FPSGalileo: NoField of View: 140 degreesGarmin Connect™ compatible: Yes (access data summaries from your compatible phone or computer)Preloaded global track database: YesInternal storage: 16 GBData cards: Yes (1 SD card slot (accessible under bottom cover): 32 GB microSD™ Class 10 card included. Two SD card slots (side of unit): not included, accepts up to 256 GB microSD)Works with vehicle stereo: YesAudio line-out/headphone jack: Yes10 Hz multi-GNSS positioning: YesTrue Optimal Lap™ with video: YesSession comparisons: YesInterior and exterior recording: NoReal-time audio cues/audio coaching: YesAutomatically identifies areas of biggest time gain: YesScrew-down mount: YesTrue Track Positioning™ (your racing line): Yes1" ball adapter with AMPS plate: YesCompass: NoHeadphone jack/audio line-out: NoDisplays best lap time, adaptive delta time, number of laps and total session time: YesImage processing: Yes (via Remote Cam)Barometric altimeter: No

SmartyCam3 Sport 84 degree FOV (wide angle) Pick up your SmartyCam3 SPORT and put it whatever you want: its compact design is perfectly shaped to take up as little space as possible into your racing cockpit. The new quarter turn locking system assures the best performance in terms of safety and closing speed. The new SmartyCam3 SPORT camera has been designed for motorsports with a single purpose, Providing great videos including all the information you need. The SmartyCam3 SPORT camera overlays all the data from both GPS and AiM data loggers connected to your ECU. The perfect camera designed for club racing or karting.Note: Must be connected to a data logger with 12v power or2 port data hub with external 12v power supply. To use as a stand alone camera you will need the 12v powered data hub and optional GPS09 module. Global shutter CMOS sensor 1920x1080 FHD 30 fps H.264 Display resolution 128x125 pixel Lens angle: 84 degree Internal, rechargeable lithium battery 350mAh 9-15 volt external power Support for up to 2TB micro SD card -10C degree / +60C working temperature range Auto power ON/OFF Auto Start/Stop recording CAN connection to all AiM systems RaceStudio3 (RS3) Configuration In the Box: SmartyCam3 SPORT 110v wall charger 16G Micro SD Card & Adapter CAN Cable, 712 5pin-male to 712 5pin-male *Mount and powered 2 port data hub optional. High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 SPORT videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 SPORT cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately. With RaceStudio3 software you can configure your overlays in a virtually infinite variety of ways: add your logo and the track map and choose your graphic objects from a list of pre-determined sets with same layout or even single objects from different sets. Your videos will be truly "yours" in all details, from the data to their graphic layout.

Ford Shelby GT350 / GT350R Lap Timer and Data Pack w/Suction Cup Mount Now available from Product41 - Proper ECU protocol with steering angle and brake psi. (2015-2019 models only, All S550 platform, GT's and GT350's) AiM, The world leader in Data Acquisition Systems has just release the latest Ford ECU template that can be used with the AiM Solo2 DL in the Shelby GT350 and GT350R's for capturing and recording some key elements of your car, engine and driver while on track. With the use of the AiM Solo2 DL, you can record RPM, speed, acceleration, braking, independent wheel speeds, coolant temp and lap times to name a few. Better than any track app, this data can be downloaded, reviewed and even overlayed from other track days or sessions. FREE standard ground shipping. At Product41 we believe in the monitoring of both vehicle and driver performance. The AiM Solo2 DL GPS Lap timer with ECU connection is the perfect addition to any performance vehicle being used for autocross, auto racing or track days. Ford has engineered and produced an incredible vehicle with the GT350, this hands down will be one of the best upgrades you can give yourself. All of the GPS and ECU based data recorded on Solo2 DL can be deeply analyzed with the powerful Race Studio 2 professional software. Graphs, histograms and tables will help you understand your performance at all positions on the track. Data Package complete with AiM Solo2 DL, OBD2 connection and Suction Cup Mount The Solo2 DL is easily installed by way of a heavy duty RAM suction cup mount and connects to the ECU via the CAN/ODBll port with one simple plug. The finished look is a clean and can be easily removed. Here is a short list of data the Solo2 DL will capture and record for later viewing from the vehicle and engine ECU.  Engine RPM Engine Coolant Temp Intake Air Temp Throttle Pedal Position Transmission Temp Engine oil temp All 4 Wheel Speeds - independent All 4 Wheel Tire Pressures - independent (with OEM TPMS sensors installed) Gear Selection (not through OBDII, to be calculated from driving) Vehicle Battery Voltage Steering Wheel Angle Brake Pressure Find your track with the powerful GPS technology The most important feature of Solo is to show your lap times.When Solo is powered up, it automatically recognizes the start/finish line coordinates of the track you are visiting based on the huge list of World tracks stored on Solo's internal memory, this allows very precise lap times with very little effort Select your race mode With a simple keyboard configuration Solo can manage four different forms of motorsports: speed races in a closed circuit, point-to-point races, regularity and performance tests.In all of these different situations Solo gives the proper information during the test and powerful data review immediately after each session. Choose your lap time mode The Solo2 DL is fully configurable and includes different lap time display modes: Rolling lap time Static lap time Predictive lap time, calculated during the current lap Predictive lap time, calculated as difference between the above and the best lap of the session. Best lap The AiM Solo2 DL can also be connected to any of the powerful AiM SmartyCam3 series of cameras. This will allow your data to be imbedded into the video with overlay.  

AiM Solo2 DL - GPS Lap Timer/Data Logger The Solo2 DL with direct power and RPM connection via the RPM harness. Perfect for vehicles without an ECU but still want all the benefits of RPM logging and expansion to either a SmartyCam, Lambda Controller or ACC2 / ACC3. Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles.New Firmware - Now the Solo 2 DL can do the following: (new units and current units can be upgraded with the latest firmware update to be compatible) Channel ExpansionChannel Expansion for getting four analog channels, such as potentiometers, pressure sensors or thermoresistences. AiM ACC2 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. SmartyCam3 ConnectionsGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam3 cameras, that will show them in overlay in a 60-fps video. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5 Click here for Stock ECU List | Click here for Racing ECU List

AiM Solo 2 DL - GPS Lap Timer/Data Logger Smarter, smaller and more powerful than ever: the brand new Solo 2 DL with ECU connection via RS232/CAN unterminated cable. Click here for Stock ECU List | Click here for Racing ECU List Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles.New Firmware - Now the Solo 2 DL can do the following: (new units and current units can be upgraded with the latest firmware update to be compatible) Channel ExpansionChannel Expansion for getting four analog channels, such as potentiometers, pressure sensors or thermoresistences. AiM ACC2 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. SmartyCam3 ConnectionsGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam3 cameras, that will show them in overlay in a 60-fps video. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5 Click here for Stock ECU List | Click here for Racing ECU List

AiM Solo 2 DL - GPS Lap Timer/Data Logger V2 Smarter, smaller and more powerful than ever: the brand new Solo 2 DL with ECU connection option via OBDII port. Click here for Stock ECU List | Click here for Racing ECU List Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles.New Firmware - Now the Solo 2 DL can do the following: (new units and current units can be upgraded with the latest firmware update to be compatible) Channel ExpansionChannel Expansion for getting four analog channels, such as potentiometers, pressure sensors or thermoresistences. AiM ACC2 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. SmartyCam3 ConnectionsGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam3 cameras, that will show them in overlay in a 60-fps video. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5 Click here for Stock ECU List | Click here for Racing ECU List

AiM MyChron 6-2T Kart Dash / Data Logger  With wider display, second AUX CAN connection, 6 Axis IMU for steering wheel angle and Wi-Fi or USB connection to the PC. Upgraded screen with multiple background color options, Bluetooth connectivity and 20 hours of non-stop working internal rechargeable Lithium battery. The sixth generation MyChron had the integration of increasingly advanced technologies, such as high-precision GPS. The MyChon6 also uses the USB-C charging port for running an external 16GB mass storage memory module for easy quick removal. Wider Display 6 Axis IMU (inertial measurement unit) for measuring steering wheel angle / input 2 Temperatures (EGT, CHT, H2o) any combination of 2 of the 3 listed Second CAN, user configurable USB-C connector for mass storage, battery charger and PC communication Wi-Fi or USB connection to the PC 6 axis IMU also for measuring steering wheel position 20 hours of non-stop working (internal rechargeable Lithium) Compatible with heart rate monitors via Bluetooth 25 Hz GPS 1 Digital output, programmable high/low activation Compatible with IR eye when using trackside beacon (8pin to 4pin patch cable will be required) Compatible with: MyChron Expansion IR Temperature Controller SmartyCam3 Series of Camera's Lambda LCU-One and LCU1S) Bluetooth connectivitySeamless connectivity with the advanced Bluetooth module in the MyChron6. If you want to measure your heart rate while racing, it can now be done. Simply connect your MyChron6 via Bluetooth to the heart rate monitor and look the data on-screen or download them after the race. Compatible with the most common heart rate monitor on the market. 3D accelerations and gyroThe 6-axis 50 Hz Inertial Measurement Unit (IMU) measures acceleration in the forward-backward, up-down and right-left directions and the angular velocity in thekart's pitch, roll and yaw directions, then calculates and relays that information in real-time to MyChron6. MyChron6 features an internal, high precision, 25 Hz four navigation satellite systems (GPS, GLONASS, BeiDou, Galileo) receiver and an internal database including information about the track: just switched ON, it automatically recognizes the track and gets the information about the Starting Line Position and the Time Zone. The precision of the calculated Lap Times is 1/100 of second.

AiM MX UTV Data Logging Dash/Gauges Absolute freedom with AiM MX UTV custom dash logger for the Arctic Cat Wildcat. MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Supported models:- Wildcat XX Speed, RPM, Coolant Temp, Transmission Belt Temp and GPS Lap times are just a few things that can be show and data logged. Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type, like the Arctic Cat, directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector. MX UTV acquires and shows the following important information: Data coming from your ECU Transmission belt temperature, by using the infrared sensor included in the kit Model: Arctic Cat WildcatChannels that will be data logged and or displayed: Speed RPM with configurable RGB shift lights Gear Engine Coolant Temp (ECT) Throttle Position (TPS) Brake Switch Transmission Belt Temperature via infrared temp sensor Transmission belt temperature, no more worries. The transmission belt temperature is one of the main concern for UTV drivers. Now you can monitor actual belt surface temperature in Real-Time.Thanks to the infrared temperature sensor, included in the kit, it is possible to constantly check the temperature, reading it directly on the display.Two RGB alarm LEDs will turn on when the temperature gets close to the critical level. Find always your track and your data as well Thanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours. GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module. - Expandable to run LCU-one CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning. - SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions. What's in the box: AiM MX UTV Dash Unit AiM mounting plate and hardware Arctic Cat ECU power harness Infrared belt temp sensor Patch cable for sensor MX UTV setup and user guide

AiM MX UTV Data Logging Dash/Gauges for Yamaha YXZ Absolute freedom with AiM MX UTV custom dash logger for the Yamaha YXZ. MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Supported models:- YXZ 1000R- YXZ 1000R SS- YXZ 1000R SS SE Speed, RPM, Coolant Temp, Oil Temp or Oil Pressure and GPS Lap times are just a few things that can be show and data logged.Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector. MX UTV acquires and shows the following important information: Data coming from your ECU Oil Temp or Oil Pressure, by using the supplied sensor included in the kit. (choose sensor type above when ordering) Model: Yamaha YXZ 2016, 2017Channels that will be data logged and or displayed: Speed RPM with configurable RGB shift lights Gear Engine Coolant Temp (ECT) Throttle Position (TPS) (some models) Brake Switch (some models) Engine Oil Temp or Engine Oil Pressure Engine Oil Temp or Engine Oil Pressure for Yamaha models On the Yamaha, the the transmission belt temperature sensor is replaced with either an engine oil temp sensor or oil pressure sensor (oil psi add: $75.00). Temperature or Pressure can be displayed directly on the display.Two RGB alarm LEDs will turn on when the temperature or pressure gets close to the critical level. Find always your track and your data as wellThanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours. GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module. - Expandable to run LCU-one CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning. - SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions. What's in the box: AiM MX UTV Dash Unit AiM mounting plate and hardware ECU power harness Engine oil temp or oil pressure sensor Patch cable for sensor MX UTV setup and user guide

AiM MX UTV Data Logging Dash/Gauges Absolute freedom with AiM MX UTV custom dash logger for the Can-Am Maverick X3 MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Speed, RPM, Coolant Temp, Transmission Belt Temp and GPS Lap times are just a few things that can be show and data logged. Supported models:- Maverick- Maverick Trail- Maverick Sport Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type, like the Can-Am X3 directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector. MX UTV acquires and shows the following important information: Data coming from your ECU Transmission belt temperature, by using the infrared sensor included in the kit Model: CAN-AM Maverick X3 and Turbo modelChannels that will be data logged and or displayed: Speed RPM with configurable RGB shift lights Gear Engine Coolant Temp (ECT) Throttle Position (TPS) Brake Switch Instant Fuel Flow Transmission Belt Temperature via infrared temp sensor Instant Fuel Consumed (Turbo model) Boost Pressure (Turbo model) Intake Air Temp (Turbo model) Transmission belt temperature, no more worries. The transmission belt temperature is one of the main concern for UTV drivers. Now you can monitor actual belt surface temperature in Real-Time.Thanks to the infrared temperature sensor, included in the kit, it is possible to constantly check the temperature, reading it directly on the display.Two RGB alarm LEDs will turn on when the temperature gets close to the critical level. Find always your track and your data as wellThanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours. GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module. - Expandable to run LCU-one CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning. SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions. What's in the box: AiM MX UTV Dash Unit AiM mouting plate and hardware ECU power harness Infrared belt temp sensor Patch cable for sensor MX UTV setup and user guide

AiM MX UTV Data Logging Dash/Gauges for Polaris RZR Absolute freedom with AiM MX UTV custom dash logger for the Polaris RZR. MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Supported models:- RZR - RS1- RZR - XP1000- RZR - XP Turbo- RZR - PRO Speed, RPM, Coolant Temp, Transmission Belt Temp and GPS Lap time are just a few things that can be show and data logged.Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector. MX UTV acquires and shows the following important information: Data coming from your ECU Transmission belt temperature, by using the infrared sensor included in the kit Model: Polaris RZRChannels that will be data logged and or displayed: Speed RPM with configurable RGB shift lights Engine Coolant Temp (ECT) Throttle Position (TPS) Brake Switch Fuel Rate Transmission Belt Temperature via infrared temp sensor Boost Pressure (turbo model only) Charge Air Intake temp (turbo model only) Transmission belt temperature, no more worries. The transmission belt temperature is one of the main concern for UTV drivers. Now you can monitor actual belt surface temperature in Real-Time.Thanks to the infrared temperature sensor, included in the kit, it is possible to constantly check the temperature, reading it directly on the display.Two RGB alarm LEDs will turn on when the temperature gets close to the critical level. Find always your track and your data as wellThanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours. GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module. - Expandable to run LCU-One CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning. - SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions. What's in the box: AiM MX UTV Dash Unit AiM mounting plate and hardware ECU power harness Infrared belt temp sensor Patch cable for sensor MX UTV setup and user guide

AiM MyChron6 Kart Dash / Data Logger The MyChron6 kart data logger with wider display, second AUX CAN connection, 6 Axis IMU for steering wheel angle and Wi-Fi or USB connection to the PC. Upgraded screen with multiple background color options, Bluetooth connectivity and 20 hours of non-stop working internal rechargeable Lithium battery. The sixth generation MyChron had the integration of increasingly advanced technologies, such as high-precision GPS. The MyChon6 also uses the USB-C charging port for running an external 16GB mass storage memory module for easy quick removal. Wider Display 6 Axis IMU (inertial measurement unit) for measuring steering wheel angle / input 1 Temperature Sensor (EGT, CHT or H2o) Second CAN, user configurable USB-C connector for dedicated mass storage, battery charger and PC communication Wi-Fi or USB connection to the PC 6 axis IMU also for measuring steering wheel position 20 hours of non-stop working (internal rechargeable Lithium) Compatible with heart rate monitors via Bluetooth 25 Hz GPS 1 Digital output, programmable high/low activation Compatible with IR eye when using trackside beacon (8pin to 4pin patch cable will be required) Compatible with: MyChron Expansion IR Temperature Controller SmartyCam3 Series of Camera's Lambda LCU-One and LCU1S) Bluetooth connectivity:Seamless connectivity with the advanced Bluetooth module in the MyChron6. If you want to measure your heart rate while racing, it can now be done. Simply connect your MyChron6 via Bluetooth to the heart rate monitor and look the data on-screen or download them after the race. Compatible with the most common heart rate monitor on the market. 3D accelerations and gyroThe 6-axis 50 Hz Inertial Measurement Unit (IMU) measures acceleration in the forward-backward, up-down and right-left directions and the angular velocity in thekart's pitch, roll and yaw directions, then calculates and relays that information in real-time to MyChron6. MyChron6 features an internal, high precision, 25 Hz four navigation satellite systems (GPS, GLONASS, BeiDou, Galileo) receiver and an internal database including information about the track: just switched ON, it automatically recognizes the track and gets the information about the Starting Line Position and the Time Zone. The precision of the calculated Lap Times is 1/100 of second.

Road-Keeper Camera - Dual HD Vehicle Video System with Roll Bar Mount and External GPS Antenna The latest innovation in video data systems for recording dual stream 1080p full HD video and audio along with GPS and accelerometer data.Road-Keeper Cameras are fully compatible with our Race-Keeper Comparo video data analysis application; this will allow you to use the same applications that drivers in professional motorsports use for reviewing, analyzing, comparing and exporting video and data from your video data logger.   Note: Potential lead time 1-2 days to build Included in the box: Road-Keeper Dual Camera System 32g micro SD card and adapter 12v cigarette lighter adapter for power Roll bar mount with clamps 10' remote mount GPS module Use Road-Keeper on the road or at the track – the cyclic logging will ensure you always capture the latest action no matter where it happens. Never worry about deleting old videos, they will be automatically overwritten when space is needed. The compact unit contains both 1080p HD cameras, 10Hz GPS, accelerometers, and status screen. This allows for a very compact secure installation in your vehicle. Can be used as a dash-cam in road vehicles or in a variety of racing applications. Both cameras can be adjusted vertically and horizontally to capture the perfect view. In-car audio is recorded onto the video streams, the microphone can be muted for privacy by pressing the Mic button on your Road-Keeper. Road-Keeper HD Specification Highlights 2 Cameras with 1080p/30 fps resolution for brilliant, broadcast-quality video True Dual Stream HD video for comprehensive video coverage (track, cockpit, rear) Fully Compatible with Race-Keeper Comparo Video Data analysis PC software MPEG-4 video files will also play in all popular media players Integrated 10Hz GPS for lap times, splits and track mapping, remote GPS available Records to removable microSD for Instant off-loading Supported microSD card: 8GB - 128GB (class 10 or above formatted to FAT32 Small, lightweight, compact construction for tidy fast install Automatic start/stop recording for truly hands off operation Start and Stop on Speed recording or Manual Start recording functions also selectable Road-Keeper automatically locks and saves outings where a high-G event occurred Auto delete of old outings as space is required on the microSD card (Looping Mode) WiFi for remote access White balance controls and HDR controls – always capture the perfect video Road- Keeper Specifications: LCD Display: 2.0” TFT LCD Camera FOV: 170° High Resolution Wide Angle Language: English, French, Spanish, Portuguese, Italian Video Resolution: FHD 1080P@30fps+ FHD 1080P@30fps; HD 720P@30fps+ HD 720P@30fps Video Format: H.264 compress format Mic/Speaker: Built-in Loop Recording: Off, 1,3,5,10,20 minutes GPS: Yes. Built-in antenna and receiver WIFI: Supported Frequency: 50HZ/60HZ

AiM Solo 2 - GPS Lap Timer Smarter, smaller and more powerful than ever: the new Solo 2 is the game-changer we were waiting for! Not just a lap-timer, the AiM Solo 2 is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time.Is that enough? Of course not. You should know that the SOLO 2 has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, SOLO 2 will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Tracks, fields, hill-climbs… Wherever you are, whatever you are driving or riding, SOLO 2 is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin Graphical 128x64 pixel display 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 98mmx73.7mmx30.2mm size, 240g weight with battery

Road-Keeper Camera - Dual HD Vehicle Video System with GPS The latest innovation in video data systems for recording dual stream 1080p full HD video and audio along with GPS and accelerometer data.Road-Keeper Camera is fully compatible with our Race-Keeper Comparo video data analysis application; this will allow you to use the same applications that drivers in professional motorsports use for reviewing, analyzing, comparing and exporting video and data from your video data logger. Included in the box: (some images above shown with roll bar mount and external GPS option) Road-Keeper Dual Camera System 32g micro SD card and adapter 12v cigarette lighter adapter for power Mounting bracket Spare 3M VBR adhesive pad Use Road-Keeper on the road or at the track – the cyclic logging will ensure you always capture the latest action no matter where it happens. Never worry about deleting old videos, they will be automatically overwritten when space is needed. The compact unit contains both 1080p HD cameras, 10Hz GPS, accelerometers, and status screen. This allows for a very compact secure installation in your vehicle. Can be used as a dash-cam in road vehicles or in a variety of racing applications. Both cameras can be adjusted vertically and horizontally to capture the perfect view. In-car audio is recorded onto the video streams, the microphone can be muted for privacy by pressing the Mic button on your Road-Keeper. Road-Keeper HD Specification Highlights 2 Cameras with 1080p/30 fps resolution for brilliant, broadcast-quality video True Dual Stream HD video for comprehensive video coverage (track, cockpit, rear) Fully Compatible with Race-Keeper Comparo Video Data analysis PC software MPEG-4 video files will also play in all popular media players Integrated 10Hz GPS for lap times, splits and track mapping, remote GPS available Records to removable microSD for Instant off-loading Supported microSD card: 8GB - 128GB (class 10 or above formatted to FAT32) Small, lightweight, compact construction for tidy fast install Automatic start/stop recording for truly hands off operation Start and Stop on Speed recording or Manual Start recording functions also selectable Road-Keeper automatically locks and saves outings where a high-G event occurred Auto delete of old outings as space is required on the microSD card (Looping Mode) White balance controls and HDR controls – always capture the perfect video Road- Keeper Specifications: LCD Display: 2.0” TFT LCD Camera FOV: 170° High Resolution Wide Angle Language: English, French, Spanish, Portuguese, Italian Video Resolution: FHD 1080P@30fps+ FHD 1080P@30fps; HD 720P@30fps+ HD 720P@30fps Video Format: H.264 compress format Mic/Speaker: Built-in Loop Recording: Off, 1,3,5,10,20 minutes GPS: Yes. Built-in antenna and receiver WIFI: Supported Frequency: 50HZ/60HZ