AiM SmartyCam3, SmartyCam HD Rev. 2.1 ECU Harness Cable designed to power and connect to your ECU your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1 and SmartyCam GP 2.2. Power harness connects the SmartyCam direct to an ECU via CAN. Unterminated leads include 12v, ground, CAN + and CAN -. This cable would be used if the camera is running in a stand alone configuration with no data logger connection. For optimal configuration you would want to add the GPS09 module. 2m Length Compatible with the following Cameras: SmartyCam 3 Corsa (all) SmartyCam 3 GP SmartyCam HD Rev. 2.1 SmartyCam HD Rev. 2.2 (GP)

AiM SmartyCam3, SmartyCam HD Rev. 2.1 ECU Harness Cable designed to power and connect to your ECU your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1 and SmartyCam GP 2.2. Power harness connects the SmartyCam direct to an ECU via CAN. Unterminated leads include 12v, ground, CAN + and CAN -. This cable would be used if the camera is running in a stand alone configuration with no data logger connection. For optimal configuration you would want to add the GPS09 module. 4m Length Compatible with the following Cameras: SmartyCam3 Corsa (all) SmartyCam3 GP SmartyCam HD Rev. 2.1 SmartyCam HD Rev. 2.2 (GP)

AiM SmartyCam3 Corsa, SmartyCam3 GP ECU Harness / 3.5mm External Mic Jack Cable designed to power and connect to your ECU your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1 and SmartyCam GP 2.2. Power harness connects the SmartyCam direct to an ECU via CAN. Unterminated leads include 12v, ground, CAN + and CAN - with a 3.5mm external mic jack. This cable would be used if the camera is running in a stand alone configuration with no data logger connection and add an external microphone. For optimal configuration you would want to add the GPS09 module. 2m Length Compatible with the following Cameras: SmartyCam3 Corsa (all) SmartyCam3 GP SmartyCam HD Rev. 2.1 SmartyCam HD Rev. 2.2 (GP)

AiM SmartyCam3 Corsa, SmartyCam3 GP ECU Harness / 3.5mm External Mic Jack Cable designed to power and connect to your ECU your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1 and SmartyCam GP 2.2. Power harness connects the SmartyCam direct to an ECU via CAN. Unterminated leads include 12v, ground, CAN + and CAN - with a 3.5mm external mic jack. This cable would be used if the camera is running in a stand alone configuration with no data logger connection and add an external microphone. For optimal configuration you would want to add the GPS09 module. 4m Length Compatible with the following Cameras: SmartyCam3 Corsa (all) SmartyCam3 GP SmartyCam HD Rev. 2.1 SmartyCam HD Rev. 2.2 (GP)

MyChron5S External Power Cable w/ Battery Block off Plate The MyChron5 external power cable allows for the unit to run directly off a 12v power source with the battery removed. This kit includes both the power cable and billet aluminum battery block off plate. Compatible with both the MyChron5, MyChron5S, MyChron5-2T and MyChron5S-2T kart data loggers.

AiM Solo2 DL - Flying Leads Harness (unterminated) Connects the Solo 2 DL via CAN, RS232 or K-line to 1000 + stock and Racing ECU's. Flying leads Solo 2 DL harness also powers the unit. Approximate length - 2m CAN/K-line, RS232

AiM Solo2 DL - RPM / Power Harness Connects the Solo 2 DL to older vehicles without an ECU. Provides data logging of RPM and powers the unit. Coil RPM connection via square wave (5-50 V signal) or pulse signals (150-450 V ignition coil trigger - primary circuit) Approximate length - 2m RPM only

AiM Solo2 DL - OBDII Harness / Plug (OBD2) Connects the Solo2 DL via the OBDII connecter to the vehicle ECU. The Solo2 DL also powers off the ODBII port when connected to the vehicle. Approximate length - 1.2m CAN/K-line OBDII

AiM SmartyCam External Microphone Cable / 3.5mm Jack Cable designed to connect your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1 and SmartyCam GP 2.2 to an external 3.5mm external microphone. 1m Length Compatible with the following Cameras: SmartyCam3 Corsa (all) SmartyCam3 GP SmartyCam HD Rev. 2.1 SmartyCam HD Rev. 2.2 (GP)

AiM Solo2 / Solo2 DL - 12v Cigarette Adapter Power Harness Connects to the Solo2 / Solo2 DL via the 712 5pin connecter binder then to 12v cigarette lighter adapter. This Solo2 vehicle power wire harness also works with the Solo2 DL. (Reminder - the Solo 2DL also powers off the ODBII port when connected to the vehicle. Approximate length - 2m

Solo2 External Direct Power Cable The external direct power cable allows for the unit to run directly off a 12v power source wired direct.  Compatible with the AiM Solo2, MyChron5 and MyChron6.

AiM 110v Wall Charger AiM MyChron5, MyChron6, SmartyCam3 and Solo2 110v wall charger. Will charge MyChron battery while the battery is still installed on the MyChron. 110v USA wall charger to 5-pin connector. Also compatible with other AiM products using the 5-pin port for charging.

MyChron External Power Cable The MyChron5 and MyChron6 external power cable allows for the unit to run directly off a 12v power source with the battery removed or installed. Compatible with all MyChron5 and MyChron6 kart data loggers.

MyChron5 Battery Block off Plate Compatible with both the MyChron5, MyChron5S, MyChron5-2T and MyChron5S-2T kart data loggers.Note: Must use external power source to power MyChron5 if this plate is used in place of the battery