Products

Paragon 1/4" Fluid Connector - Female $18.00

Paragon Guardian Fluid Connector - 1/4 " Female (safety pull) Fitting for Paragon and other driver cooling garments. Typically this connector is used on the water hose side coming from the cooler connecting to the shirt. (car or cooler side) 1/4" OD - 3/16" ID Female Fluid Connector Full compatibility with Coolshirt brand male connectors Sold individually NOTE: If you are using the Chillout Systems Pro Touring Series or Club Series shirts with the Paragon or COOLSHIRT cooling systems, you will want to purchase the appropriate male or female connector depending on your setup.

Paragon 1/4" Fluid Connector - Male $14.00

Paragon Fluid Connector - 1/4" Male (shirt side) Fitting for Paragon and other driver cooling garments. Typically this connector is used on the water hose attached to the shirt. (shirt side) 1/4" OD Male Fluid Connector 3/16" ID Full compatibility with Coolshirt brand female connectors Safety Pull Sold individually NOTE: If you are using the Chillout Systems Pro Touring Series or Club Series shirts with the Paragon or COOLSHIRT cooling systems, you will want to purchase the appropriate male or female connector depending on your setup.

Paragon 12' Guardian Insulated Cooling Hose $178.99

Paragon Guardian Insulated 12' Driver Cooling Hose Designed for efficiency and durability connecting the driver cooling box and driver cooling shirt. The 12ft Guardian Hose is manufactured to keep your cooling garment refreshed with icy cold water. The return side of the hose set reverts water, warmed by body heat, back to the cooler to be rechilled and recirculated. Foam insulation acts as a thermal barrier to properly maintain the temperature of the water being supplied to the cooling garment. Guardian connectors, on the hose set, are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the hose set or garment. Need something between 8' and 12', the hose is easily cut to length and connectors reinstalled.

Paragon 4' Guardian Insulated Cooling Hose $81.99

Paragon Guardian Insulated 4' Driver Cooling Hose Paragon Pro 4ft Guardian Insulated Hose is designed for efficiency and durability connecting the driver cooling box and driver cooling shirt. The 4ft Guardian Hose is manufactured to keep your cooling garment refreshed with icy cold water. The return side of the hose set reverts water, warmed by body heat, back to the cooler to be rechilled and recirculated. Foam insulation acts as a thermal barrier to properly maintain the temperature of the water being supplied to the cooling garment. Guardian connectors, on the hose set, are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the hose set or garment.

Paragon 5/16" Fluid Connector - Female $23.00

Paragon Guardian Fluid Connector - 5/16" Female (large - safety pull) Fitting for Paragon and other driver cooling garments. Typically this connector is used on the water hose side coming from the cooler connecting to the shirt. (car or cooler side) 5/16" OD Female Fluid Connector with 1/4" ID Full compatibility with Coolshirt brand male connectors Sold individually NOTE: If you are using the Chillout Systems Pro Touring Series or Club Series shirts with the Paragon or COOLSHIRT cooling systems, you will want to purchase the appropriate male or female connector depending on your setup.

Paragon 5/16" Fluid Connector - Male $14.00

Paragon Fluid Connector - 5/16" (large) Male (shirt side) Fitting for Paragon and other driver cooling garments. Typically this connector is used on the water hose attached to the shirt. (shirt side) This is the OEM connector that comes on Paragon Cooling Garments. 5/16" Male Fluid Connector - 1/4" ID Full compatibility with Coolshirt brand female connectors Safety Pull Sold individually NOTE: If you are using the Chillout Systems Pro Touring Series or Club Series shirts with the Paragon or COOLSHIRT cooling systems, you will want to purchase the appropriate male or female connector depending on your setup.

Paragon 8' Guardian Insulated Cooling Hose $126.99

Paragon Guardian Insulated 8' Driver Cooling Hose Designed for efficiency and durability connecting the driver cooling box and driver cooling shirt. The 8ft Guardian Hose is manufactured to keep your cooling garment refreshed with icy cold water. The return side of the hose set reverts water, warmed by body heat, back to the cooler to be rechilled and recirculated. Foam insulation acts as a thermal barrier to properly maintain the temperature of the water being supplied to the cooling garment. Guardian connectors, on the hose set, are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the hose set or garment. Hose is easily cut to length and connectors reinstalled.

Paragon Arctic Fox Pro Mini Cooling System - 2L $489.99

Paragon Pro Mini Driver Cooling System - Lithium Battery Powered The Paragon Pro Arctic Fox Pro Micro Cooling Bag powered by a 7.4V lithium ion battery is used as a self contained portable cooling system for the racer that has limited room to work with. The bag is designed to use our endurance ice packs and plug directly into any of our liquid cooled garments. This bag is perfect for karting, formula racing, micro sprints, cage karts or anywhere that a small, compact cooling solution is needed due to space limitations. Popular uses:- Track Day Cars (easy to strap in and secure to passenger seat)- Karting- Cage Karts- Formula Cars- Micro Sprints This system is complete with Lithium Ion Battery Kit and Charger. Emergency pull release standard on all racing products. Compatible with All CoolSuits, Cooling Suits and Chillout Shirts Up to 45 minutes of driver cooling Hours of use on a single battery charge

Paragon Cooling Shirt - Black from $159.99

Paragon Water Cooling Shirt - Black The Paragon water cooled cotton top is designed for optimum performance, efficiency, and ice retention. The garment is 6.1 oz, 100% sustainably sourced ringspun cotton and includes ample tubing to cover the core, keeping you cool in the most intense environments. Shirts are available in either right or left exit of the tubing. Paragon offers the option to add a hood to the Paragon cotton top for extra cooling to the head. The Paragon cotton top hood is made from the same material as the Paragon cotton top for a seamless connection. Shirts and bottoms come with male fluid connectors standard. If using with other systems proper fittings may be required. Available in sizes: XXS - XXXXL in Right Exit (RE) or Left Exit (LE) (XXXL and XXXXL add $31.00)

Paragon Cooling Shirt - White from $159.99

Paragon Water Cooling Shirt - White The Paragon water cooled cotton top is designed for optimum performance, efficiency, and ice retention. The garment is 6.1 oz, 100% sustainably sourced ringspun cotton and includes ample tubing to cover the core, keeping you cool in the most intense environments. Shirts are available in either right or left exit of the tubing. Paragon offers the option to add a hood to the Paragon cotton top for extra cooling to the head. The Paragon cotton top hood is made from the same material as the Paragon cotton top for a seamless connection. Shirts and bottoms come with male fluid connectors standard. If using with other systems proper fittings may be required. Available in sizes: XXS - XXXXL in Right Exit (RE) or Left Exit (LE) (XXXL and XXXXL add $31.00)

Paragon Ignite Cooling Bottoms - SFI 3.3 $299.99

Paragon Ignite Pro Water Cooling Bottoms - SFI 3.3 Certified The Paragon Ignite bottoms are Paragon’s flame-retardant option when you need to cool more than just your core. The Paragon Ignite bottoms are designed specifically for wearing in unison with Paragon tops. The Ignite bottoms are 4.8 oz, Modacrylic and FR Rayon blend with intense quick drying qualities. Available in S – XXL with a true to size fit and right or left exit of the tubing. The Ignite Bottoms meet SFI 3.3 specifications. Shirts and bottoms come with male fluid connectors standard. If using with other systems proper fittings may be required. Available in sizes: Small - XXL in Right Exit (RE) or Left Exit (LE)

Paragon Ignite Cooling Shirt - SFI 3.3 $289.99

Paragon Ignite Pro Water Cooling Shirt - SFI 3.3 Certified The Paragon Ignite Pro short sleeve driver cooling top is Paragon’s flame-retardant option for keeping the core cool in the most intense environments. The garment is 4.8 oz, Modacrylic and FR Rayon blend with intense quick drying qualities and ample tubing to cover the core.The Ignite Short Sleeve top meets SFI 3.3 specifications. Paragon offers the option to add a hood to the Paragon Ignite top for extra cooling to the head. The Paragon Ignite hood is made from the same material as the Paragon Ignite top for a seamless connection. Paragon also offers the option to add tubing on the sleeves of the garment when cooling more than just the core is needed. Available in S – XXL with a true to size fit, right or left exit of the tubing. Shirts and bottoms come with male fluid connectors standard. If using with other systems proper fittings may be required. Available in sizes: Small - XXL in Right Exit (RE) or Left Exit (LE)

Paragon Pro Cooler Maintenance Additive $13.00

Paragon Pro Cooling System Maintenance Additive This non-toxic bio-degradable "Defense Solution" contains a fungicide yet is safe to use in all driver cooling systems. Regular use of this additive will not only help clean the system but it will also improve the performance and life of the system pump. We recommend the use of 2 ounces of Maintenance Solution every time a system is used and 6 ounces for the large MPS systems. 16oz. bottle Regular use of the Maintenance Additive could add years of life to your system and help keep the system working at its peak performance.

Paragon Pro Cooling Shirt from $265.99

Paragon Pro Water Cooling Shirt The Paragon Pro short sleeve is the amped-up version of Paragon’s cotton top and includes double the tubing when compared to the Paragon top. The Paragon Pro top is the premier choice when prioritizing cooling capacity over ice retention. The garment is 6.1 oz, 100% sustainably sourced rings pun cotton and includes ample tubing to cover the core, keeping you cool in the most intense environments. Available in Small – XXXXL with a true to size fit with right or left exit of the tubing. Shirts and bottoms come with male fluid connectors standard. If using with other systems proper fittings may be required. Available in sizes: Small - XXXXL in Right Exit (RE) or Left Exit (LE)

Paragon Pro Everlast Ice Pack $7.00

Paragon’s Everlast Ice Pack Allows for longer cooling periods when added to ice and water in all Paragon coolers and Paragon cooler bags. Paragon’s Everlast Ice should be kept in a freezer until ready for use. Compatible with existing non-Paragon coolers in the market.

Paragon Pro O-Ring Pack $9.00

Paragon Pro O-Ring Pack Compatible with all Paragon and Coolshirt fluid connector fittings. Spare and replacements for dried, cracked or torn O-rings on all Paragon Male Connectors.

Paragon Pro Viking Cooler 12L Tray $128.99

Paragon Viking Cooler 12L Mounting Tray & Straps Designed to provide a mounting option with protection for the Paragon’s 12L Viking and Viking Pro coolers. Paragon’s Viking Tray includes two Viking Tray Straps allowing access to the interior of the cooler without having to remove the cooler from the Viking Tray. Also compatible with Coolshirt 13qt coolers.

Paragon Pro Viking Cooler 18L Tray $156.99

Paragon Viking Cooler 18L Mounting Tray & Straps Designed to provide a mounting option with protection for the Paragon’s 18L Viking and Viking Pro coolers. Paragon’s Viking Tray includes two Viking Tray Straps allowing access to the interior of the cooler without having to remove the cooler from the Viking Tray. Also compatible with Coolshirt 19qt. coolers.

Paragon Pro Viking Cooler Drain Kit $36.99

Paragon Viking Cooler Drain Kit The ultimate accessory for draining water from Paragon garments, hose sets, coolers and bags. Paragon’s Drain Kit includes two male connectors and two female connectors.

Paragon Pro Viking Cooler Mounting Straps $15.00

Paragon Viking Cooler Mounting Straps Designed exclusively for use with Paragon’s Viking Coolers and Viking Trays. Paragon’s Viking Tray Straps unique design allows access to the interior of the cooler without having to remove the cooler from the Viking Tray. Two (2) per Viking Cooler and Viking Tray are required. Sold individually. Also compatible with Coolshirt 19qt and 13qt. coolers.

Paragon Viking Pro System - 12 Liter $735.00

Paragon Viking Pro - 12L Driver Cooling System Paragon Viking 12L driver cooling system provides the advantage of system for those racing applications that have limited space or shorter race durations. The addition of a u-shaped aluminum air tube inside the cooler, designed specifically for helmet cooling, when connected to a blower system, is what makes this Paragon’s Pro version. This system provides cooled water for the drivers shirt and cooled air for the helmet. Perfect for road racing, circle track, drags and many other racing types – a popular driver accessory among SCCA, NASA racers and track day drivers. Paragon water cooling systems circulate ice water through the veined driver cooling shirt to lower and stabilize core body temperatures. The compact 12 Liter Viking system provides up to 3 hours of cooling from a single block of ice, or approximately 2 hours using cubed ice. The leakproof Viking Series cooler measures 18"L x 10"W x 11"H. The hinges and latches on the cooler lid can be reversed to allow for the most efficient routing of the hose outlets and easiest access for refilling. The internal 2 amp pump is designed to be wired directly to a 12 volt power supply. The side exit Guardian bulkhead connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected hose set or garment. Compatible with All CoolSuits, Coolshirt shirts and Chillout Systems Shirts with proper shirt side connectors Kit contains: Viking Pro 12L (12.6qt) cooler with pump and fittings 4' insulated coolant hose with connectors Mounting tray Mounting Straps

Paragon Viking Pro System - 18 Liter $795.00

Paragon Viking Pro - 18L Driver Cooling System Paragon Viking Pro 18L driver cooling system provides the advantage of system for those racing applications that have limited space or shorter race durations. The addition of a u-shaped aluminum air tube inside the cooler, designed specifically for helmet cooling, when connected to a blower system, is what makes this Paragon’s Pro version. This system provides cooled water for the drivers shirt and cooled air for the helmet. Perfect for road racing, circle track, drags and many other racing types – a popular driver accessory among SCCA, NASA racers and track day drivers. Paragon water cooling systems circulate ice water through the veined driver cooling shirt to lower and stabilize core body temperatures. The compact 18 Liter Viking system provides up to 6 hours of cooling from a single block of ice, or approximately 3 hours using cubed ice. The leakproof Viking Series cooler measures 19"L x 11"W x 13"H. The hinges and latches on the cooler lid can be reversed to allow for the most efficient routing of the hose outlets and easiest access for refilling. The internal 2 amp pump is designed to be wired directly to a 12 volt power supply. The side exit Guardian bulkhead connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected hose set or garment. Compatible with All CoolSuits, Coolshirt shirts and Chillout Systems Shirts with proper shirt side connectors Kit contains: Viking Pro 18L (19qt) cooler with pump and fittings 4' insulated coolant hose with connectors Mounting tray Mounting Straps

Paragon Viking System - 12 Liter $560.00

Paragon Viking 12L Driver Cooling System Paragon Viking 12L driver cooling system provides the advantage of system for those racing applications that have limited space or shorter race durations. Perfect for road racing, circle track, drags and many other racing types – a popular driver accessory among SCCA, NASA racers and track day drivers. Kit contains: 12L (12.6qt) cooler with pump and fittings 4' insulated coolant hose with connectors Mounting tray Mounting Straps Paragon water cooling systems circulate ice water through the veined driver cooling shirt to lower and stabilize core body temperatures. The compact 12 Liter Viking system provides up to 3 hours of cooling from a single block of ice, or approximately 2 hours using cubed ice. The leakproof Viking Series cooler measures 15"L x 10"W x 11"H. The hinges and latches on the cooler lid can be reversed to allow for the most efficient routing of the hose outlets and easiest access for refilling. The internal 2 amp pump is designed to be wired directly to a 12 volt power supply. The side exit Guardian bulkhead connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected hose set or garment. Compatible with All CoolSuits, Coolshirt shirts and Chillout Systems Shirts with proper shirt side connectors

Paragon Viking System - 18 Liter $598.00

Paragon Viking - 18L Driver Cooling System Paragon Viking 18L driver cooling system provides the advantage of system for those racing applications that have limited space or shorter race durations. Perfect for road racing, circle track, drags and many other racing types – a popular driver accessory among SCCA, NASA racers and track day drivers. Kit contains: 18L (19qt) cooler with pump and fittings 4' insulated coolant hose with connectors Mounting tray Mounting Straps Paragon water cooling systems circulate ice water through the veined driver cooling shirt to lower and stabilize core body temperatures. The compact 18 Liter Viking system provides up to 6 hours of cooling from a single block of ice, or approximately 3 hours using cubed ice. The leakproof Viking Series cooler measures 16.5"L x 11"W x 13"H. The hinges and latches on the cooler lid can be reversed to allow for the most efficient routing of the hose outlets and easiest access for refilling. The internal 2 amp pump is designed to be wired directly to a 12 volt power supply. The side exit Guardian bulkhead connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected hose set or garment. Compatible with All CoolSuits, Coolshirt shirts and Chillout Systems Shirts with proper shirt side connectors.

Patch Cable 712-719 .5m - 4pin $48.00

Patch Cable 712-719 - .5m length AiM patch cable. 712 4-pin M / 719 4-pin F. Commonly used with the Channel Expansion, EVO4 and EVO4S data loggers systems requiring the 712 4-pin binder plug. Common uses: EVO4 data logger to sensor EVO4S data logger to sensor MX-UTV to IR belt temp sensor IBTS gauge to IR belt temp sensor Channel Expansion

Patch Cable 712-719 1m - 4pin $48.00

Patch Cable 712-719 - 1m length AiM patch cable. 712 4-pin M / 719 4-pin F. Commonly used with the EVO4 and EVO4S data loggers systems requiring the 712 4-pin binder plug. Common uses: EVO4 data logger to sensor EVO4S data logger to sensor MX-UTV to IR belt temp sensor IBTS gauge to IR belt temp sensor Channel Expansion

Patch Cable 712-719 2.5m - 4pin $48.00

Patch Cable 712-719 - 2.5m length AiM patch cable. 712 4-pin M / 719 4-pin F. Standard replacement cable between an AiM MX-UTV data logger and belt temp sensor. (2 seater) Common uses: EVO4 data logger to sensor EVO4S data logger to sensor MX-UTV to IR belt temp sensor IBTS gauge to IR belt temp sensor Channel Expansion

Patch Cable 712-719 2m - 4pin $48.00

Patch Cable 712-719 - 2m length AiM patch cable. 712 4-pin M / 719 4-pin F. Common uses: EVO4 data logger to sensor EVO4S data logger to sensor MX-UTV to IR belt temp sensor IBTS gauge to IR belt temp sensor Channel Expansion

Patch Cable 712-719 3m - 4pin $48.00

Patch Cable 712-719 - 3m length AiM patch cable. 712 4-pin M / 719 4-pin F. Common uses: EVO4 data logger to sensor EVO4S data logger to sensor MX-UTV to IR belt temp sensor IBTS gauge to IR belt temp sensor Channel Expansion

Patch Cable 712-719 4m - 4pin $48.00

Patch Cable 712-719 - 4m length AiM patch cable. 712 4-pin M / 719 4-pin F. Standard replacement cable for the AiM MX-UTV data logger and IR belt temp sensor and IBTS belt temp gauge. (4 seater) Common uses: EVO4 data logger to sensor EVO4S data logger to sensor MX-UTV to IR belt temp sensor IBTS gauge to IR belt temp sensor Channel Expansion

Patch Cable 719-719 .5M $33.00

Patch Cable - 719 / 4 pin .5 meter length (19.5"), 719 4-pin/m to 719 4-pin/f. These patch cables used extend the reach of any sensor with a 719 connector. Commonly used with all AiM Data logger harnesses to sensor.

Patch Cable 719-719 1.5M $33.00

Patch Cable - 719 / 4pin 1.5m length (59"), 719 4-pin/m to 719 4-pin/f. These patch cables used extend the reach of any sensor with a 719 connector. Commonly used with all AiM Data logger harnesses to sensor.

Patch Cable 719-719 1M $33.00

Patch Cable - 719 / 4pin 1m length (39.5"), 719 4-pin/m to 719 4pin/f. These patch cables used extend the reach of any sensor with a 719 connector. Commonly used with all AiM Data logger harnesses to sensor.

Patch Cable 719-719 2.5M $33.00

Patch Cable - 719 / 4pin 2.5m length, 719 4-pin/m to 719 4-pin/f. These patch cables used extend the reach of any sensor with a 719 connector. Commonly used with all AiM Data logger harnesses to sensor.

Patch Cable 719-719 2M $33.00

Patch Cable - 719 / 4pin 2m length, 719 4-pin/m to 719 4-pin/f. These patch cables used extend the reach of any sensor with a 719 connector. Commonly used with all AiM Data logger harnesses to sensor.

Sold out

Patch Cable 719-719 3.5M $33.00

Patch Cable - 719 / 4pin 3.5m length, 719 4-pin/m to 719 4-pin/f. These patch cables used extend the reach of any sensor with a 719 connector. Commonly used with all AiM Data logger harnesses to sensor.

Patch Cable 719-719 3M $33.00

Patch Cable - 719 / 4pin 3m length, 719 4-pin/m to 719 4-pin/f. These patch cables used extend the reach of any sensor with a 719 connector. Commonly used with all AiM Data logger harnesses to sensor.

Patch Cable 719-719 4M $33.00

Patch Cable - 719 / 4pin 4m length, 719 4-pin/m to 719 4-pin/f. These patch cables used extend the reach of any sensor with a 719 connector. Commonly used with all AiM Data logger harnesses to sensor.

Peltor 4C Helmet Communication Kit $125.00 $140.00

Peltor 4 Conductor Coil Cord Kit The Peltor wired 4 Conductor Coil Kit is ready to plug and play with your wired car harness. Use with any 3.5mm Stereo Speakers like our Standard 3.5mm Plug & Speakers or Stereo Ear Buds (This coil kit is Stereo wired and will not work with mono wired speakers.) High Quality Nexus Inline 4 channel Noise Cancelling Boom Mic Female 3.5mm Plug to use your stereo earbuds or speakers easily Works with stereo wired 3.5mm Plug & Speakers (HACOM003)(does not work with Elite Speakers (HACOM004) which are Mono wiring)

Polaris RZR 570 ECU Harness $80.00

MX UTV Polaris RZR 570 ECU Harness This harness connects the AiM Sports MX-UTV dash logger to the ECU of the Polaris RZR 570. This plugs directly into the diagnostic or ODBII port. This is specific to the 570 model.

Polaris RZR ECU Harness $80.00

MX UTV Polaris RZR ECU Harness This harness connects the AiM Sports MX UTV dash logger to the ECU of the Polaris RZR. This plugs directly into the diagnostic or ODBII port.

Portable Radio Car Harness - Motorola 2-pin $175.00

Racing Radios Portable Radio Car Harness Motorola 2-pin portable radio car harness, RCH-139010A, 4 Conductor (IMSA) wiring in-car radio harness. Compatible with 2 pin Motorola MOTOTRBO R2, CP100, CP200, BPR40, P1225, PR400 and GP300 handheld portable two-way radios. The car harness is one of the most important pieces of your racecars communication system. These harnesses are hand made in the USA from high-quality components. This harness is designed to work with Motorola's 2 prong style portable radios. Four conductor style (IMSA) radio car harness Compatible with Motorola two-prong radios - MOTOTRBO R2, CP100D, CP200, CP200D, BPR-40, P1225, PR400 and GP300 To use this harness you will need a push-to-talk switch. RPT-30, RPT-40, RPT-60 or other 3-pin industry-standard PTT (push-to-talk switch)

Pressure Sensor 0-150psi $165.00

KA Pressure Sensor 0-150psi KA style Oil pressure sensor, 0-150psi, 1/8" NPT. 719 connector.

Pressure Sensor 0-2000psi $165.00

KA Pressure Sensor 0-2000psi Pressure sensor ideal for reading brake pressure, 0-2000psi. This sensor has a 4-pin 719 (plastic push-on) connector and a male 1/8 NPT thread.

Pressure Sensor 0-50psi $165.00

KA Pressure Sensor 0-50psi KA style Oil pressure sensor, 0-50psi, 1/8" NPT. 719 connector.

Pro Airflow Duckbill 12K Carbon - SA2020 (Closeout) $600.00 $839.00

Pyrotect Pro Air Flow Carbon Racing Helmet - SA2020 SA2020 Valid through 2030 for competitionSize: Medium or Large Available Pyrotect’s Pro Airflow SA2020 redesigned carbon helmets are unmatched by the competition. Super lightweight at 3lbs 3oz. The Pro Airflow SA2020 helmets come with a unique six pad interior system which allows for resizing the helmet for a perfect fit along with corrugated ridges which allows for better heat transfer to keep you cooler and reduce fogging. The Pro Airflow helmets are vacuumed bagged and autoclave cured for superior helmet strength and durability while keeping the helmet as light as possible. Designed with a 12K Carbon Weave Vacuum bagged & autoclave cured light weight shell for maximum durability Stainless Steel hardware and a Kevlar chinstrap New Head Liner air channel design for better adjustability, added comfort, and improved air flow True Fit removable six pad headliner & cheek pad system for cleaning and easy resizing for a perfect fit Snap it front latch for positive and secure shield closure and easy opening .125″ Polycarbonate shield with a three-stage pivot positioning system with tear off post Rubber eye port seal Large eye port offers greater visibility M6 inserted for head neck restraint devices Fire retardant Nomex interior Great aerodynamics Compatible with Racing Optics or Ultra Shield tear offs Snell SA2020 rated Sizes 2XS to 3XL Product Weight from 3.1lb – 3.4lb

PTT Switch Thru-Hole / RPT-30 HD $120.00

Heavy Duty Thru-Hole Push-to-Talk Switch Racing Radios RPT-30 screw mount PTT switch is custom made by Racing Radios. These push to talk switches are used by the top race teams around the world. A screw mount switch provides a secure mount and reliable connection. Rear rubber boot for added protection. Tech Specs: 3-Pin industry-standard connection Fits 9/16" hole

Sold out

PTT Switch Thru-Hole / RPT-60 $65.00

Standard Thru-Hole Push-to-Talk Switch Racing Radios RPT-60 screw mount PTT switch. These push to talk switches are used by the top race teams around the world. A screw mount switch provides a secure mount and reliable connection. Tech Specs: 3-Pin industry-standard connection Screw Mount Design

PTT Switch Velcro / RPT-40 $65.00

Standard Velcro Push-to-Talk Switch Racing Radios RPT-40 Velcro mount PTT switch. These push to talk switches are used by the top race teams around the world. A screw mount switch provides a secure mount and reliable connection. Tech Specs: 3-Pin industry-standard connection Velcro Mount Design

Pyrotect Pro-One Balaclava $79.00

PYROTECT Pro-One Balaclava - FIA/SFI Certified PYROTECT Head Socks help seal out flames, heat and dirt or sand with our Pro-One Head Sock. One size fits all. FIA Approved. Features include: Double-layered face area for extra protection Single Eye port FIA 8856-2018 / SFI 3.3 homologation standards

Find anything you need

Sign in to your account

Create an account

Item added to cart!